BR0JX±17
F13341
PinRear Disc Brake
Assembly
Front Shoe C±washer
ShimParking Brake Shoe
Lever
Rear Shoe
Shoe Strut
Spring
Adjuster
CupTension Spring Shoe Hold±down
Spring
Disc
High temperature grease
N´m (kgf´cm, ft´lbf) : Specified torqueAnchor SpringCup
Shoe Hold±down
Spring
Shoe Return
Spring
105 (1,070, 77)
Non±reusable part BR±42
± BRAKEPARKING BRAKE
3209 Author: Date:
2005 SEQUOIA (RM1146U)
PARKING BRAKE
COMPONENTS
BR1NF±02
F13327
F13323
F13324
± BRAKEPARKING BRAKE
BR±43
3210 Author: Date:
2005 SEQUOIA (RM1146U)
DISASSEMBLY
1. REMOVE REAR WHEEL
Torque: 110 N´m (1,122 kgf´cm, 81 ft´lbf)
2. REMOVE REAR DISC BRAKE ASSEMBLY
(a) Remove the 2 mounting bolts and remove the disc brake
assembly.
Torque: 105 N´m (1,070 kgf´cm, 77 ft´lbf)
(b) Suspend the disc brake securely and so the hose is not
stretched.
3. REMOVE DISC
(a) Release the parking brake lever.
(b) Place matchmarks on the disc and rear axle hub.
(c) Remove the disc.
HINT:
If the disc cannot be removed easily, turn the shoe adjust-
er until the wheel turns freely.
If there are no matchmarks, temporarily install the disc,
then measure the disc runout and install the disc in posi-
tion (See page BR±39).
4. REMOVE SHOE RETURN SPRINGS
Using needle±nose pliers, remove the 2 shoe return springs.
5. REMOVE SHOE STRUT WITH SPRING
HINT:
At the time of reassembly, install the strut with the spring facing
forward.
6. REMOVE SHOE ADJUSTER
Slide the front shoe toward outside, remove the shoe adjuster.
7. REMOVE FRONT SHOE
(a) Using a needle±nose pliers, disconnect the anchor spring
and tension spring from the front shoe.
(b) Remove the anchor spring and tension spring.
