TOYOTA SEQUOIA 2015 2.G Navigation Manual

211
PHONE
7
3. WHAT TO DO IF...
1. TROUBLESHOOTING
When using the hands-free system with a Bluetooth® device
If there is a problem with the hands-free system or a Bluetooth® device, first check
the table below.
SymptomLikely causeSolution
Page
Cellular
phoneThis
system
The hands-free sys-
tem or Bluetooth®
device does not
work.
The connected de-
vice may not be a
compatible
Bluetooth
® cellular
phone.
For a list of specific
devices which
operation has been
confirmed on this
system, check with
your Toyota dealer or
the following
website:
http://
www.toyota.com/
entune/

The Bluetooth® ver-
sion of the connected
cellular phone may
be older than the
specified version.Use a cellular phone
with Bluetooth® ver-
sion 2.0 or higher
(recommended: Ver.
3.0 +EDR or higher).43

212
3. WHAT TO DO IF...
When registering/connecting a cellular phone
SymptomLikely causeSolution
Page
Cellular
phoneThis
system
A cellular phone can-
not be registered.
An incorrect pass-
code was entered on
the cellular phone.Enter the correct
passcode on the cel-
lular phone.

The registration op-
eration has not been
completed on the
cellular phone side.Complete the regis-
tration operation on
the cellular phone
(approve registration
on the phone).

Old registration infor-
mation remains on
either this system or
the cellular phone.
Delete the existing
registration informa-
tion from both this
system and the cellu-
lar phone, then regis-
ter the cellular phone
you wish to connect
to this system.
48
A Bluetooth® con-
nection cannot be
made.
Another Bluetooth®
device is already
connected.
Manually connect the
cellular phone you
wish to use to this
system.
49
Bluetooth® function
is not enabled on the
cellular phone.Enable the
Bluetooth® function
on the cellular
phone.
Automatic
Bluetooth® connec-
tion on this system is
set to off.
Set automatic
Bluetooth® connec-
tion on this system to
on when the engine
switch is in the “ACC”
or “ON” position.
53

213
3. WHAT TO DO IF...
PHONE
7
When making/receiving a call
“Unable to dial.
Please check your
phone.”
Bluetooth® function
is not enabled on the
cellular phone.Enable the
Bluetooth® function
on the cellular
phone.
Old registration infor-
mation remains on
either this system or
the cellular phone.
Delete the existing
registration informa-
tion from both this
system and the cellu-
lar phone, then regis-
ter the cellular phone
you wish to connect
to this system.
48
SymptomLikely causeSolution
Page
Cellular phoneThis
system
A call cannot be
made/received.Your vehicle is in a
“No Service” area.Move to where “No
Service” no longer
appears on the dis-
play.

SymptomLikely causeSolution
Page
Cellular
phoneThis
system

214
3. WHAT TO DO IF...
When using the contacts
SymptomLikely causeSolution
Page
Cellular
phoneThis
system
Contact data cannot
be transferred manu-
ally/automatically.
The profile version of
the connected cellu-
lar phone may not be
compatible with
transferring contact
data.
For a list of specific
devices which
operation has been
confirmed on this
system, check with
your Toyota dealer or
the following
website:
http://
www.toyota.com/
entune/

Automatic contact
transfer function on
this system is set to
off.Set automatic con-
tact transfer function
on this system to on.201
Passcode has not
been entered on the
cellular phone.Enter the passcode
on the cellular phone
if requested (default
passcode: 1234).

Transfer operation
on the cellular phone
has not completed.
Complete transfer
operation on the cel-
lular phone (approve
transfer operation on
the phone).

Contact data cannot
be edited.
Automatic contact
transfer function on
this system is set to
on.Set automatic con-
tact transfer function
on this system to off.201

215
3. WHAT TO DO IF...
PHONE
7
When using the Bluetooth® message function
 In other situations
SymptomLikely causeSolution
Page
Cellular
phoneThis
system
Messages cannot be
viewed.
Message transfer is
not enabled on the
cellular phone.
Enable message
transfer on the cellu-
lar phone (approve
message transfer on
the phone).

Automatic transfer
function on this sys-
tem is set to off.Set automatic trans-
fer function on this
system to on.
209
New message notifi-
cations are not dis-
played.
Notification of SMS/
MMS/E-mail recep-
tion on this system is
set to off.Set notification of
SMS/MMS/E-mail
reception on this sys-
tem to on.
209
Automatic message
transfer function is
not enabled on the
cellular phone.Enable automatic
transfer function on
the cellular phone.

SymptomLikely causeSolution
Page
Cellular phoneThis
system
The Bluetooth® con-
nection status is dis-
played at the top of
the screen each time
the engine switch is
in the “ACC” or “ON”
position.
Connection confir-
mation display on
this system is set to
on.To turn off the dis-
play, set connection
confirmation display
on this system to off.
51

216
3. WHAT TO DO IF...
: For details, refer to the owner’s manual that came with the cellular phone.
Even though all con-
ceivable measures
have been taken, the
symptom status does
not change.
The cellular phone is
not close enough to
this system.Bring the cellular
phone closer to this
system.

The cellular phone is
the most likely cause
of the symptom.
Turn the cellular
phone off, remove
and reinstall the bat-
tery pack, and then
restart the cellular
phone.

Enable the cellular
phone’s Bluetooth®
connection.

Stop the cellular
phone’s security soft-
ware and close all
applications.

Before using an ap-
plication installed on
the cellular phone,
carefully check its
source and how its
operation might af-
fect this system.

SymptomLikely causeSolution
Page
Cellular phoneThis
system

217
3. WHAT TO DO IF...
PHONE
7

218
1. QUICK REFERENCE ................... 220
MAP SCREEN ..................................... 220
NAVIGATION OPTIONS SCREEN...... 222
2. MAP SCREEN OPERATION ....... 223
CURRENT POSITION DISPLAY ......... 223
MAP SCALE ........................................ 223
ORIENTATION OF THE MAP ............. 224
SWITCHING THE MAP MODE............ 225
SCREEN SCROLL OPERATION ........ 227
ADJUSTING LOCATION IN SMALL INCREMENTS................................... 228
3. MAP SCREEN INFORMATION ... 229
DISPLAYING MAP INFORMATION .... 229
DISPLAYING INFORMATION ABOUT THE ICON WHERE
THE CURSOR IS SET ...................... 231
STANDARD MAP ICONS .................... 232
4. TRAFFIC INFORMATION ............ 233
DISPLAYING TRAFFIC INFORMATION ON THE MAP .......... 235
1. DESTINATION SEARCH SCREEN .................................... 236
2. SEARCH OPERATION.. .............. 238
SELECTING SEARCH AREA .............. 239
SETTING HOME AS DESTINATION ... 239
SETTING PRESET DESTINATIONS
AS DESTINATION ............................. 239
SEARCHING BY ADDRESS ................ 240
SEARCHING BY POINT OF INTEREST ................................... 241
SEARCHING FROM PREVIOUS DESTINATIONS ................................ 245
SEARCHING BY ADDRESS BOOK .... 245
SEARCHING BY EMERGENCY .......... 246
SEARCHING BY INTERSECTION AND FREEWAY ................................ 246
SEARCHING BY MAP ......................... 248
SEARCHING BY COORDINATES ....... 248
3. STARTING ROUTE GUIDANCE ....... ......................... 249
STARTING ROUTE GUIDANCE.......... 249
PAUSING GUIDANCE ......................... 252
1BASIC OPERATION2DESTINATION SEARCH
8
NAVIGATION SYSTEM
*

8
219
1
2
3
4
5
6
7
8
9
1. ROUTE GUIDANCE SCREEN ..... 253
SCREEN FOR ROUTE GUIDANCE ... 253
ROUTE OVERVIEW............................ 254
DURING FREEWAY DRIVING............ 255
WHEN APPROACHING INTERSECTION ............................... 256
TURN LIST SCREEN .......................... 257
TURN-BY-TURN ARROW SCREEN ... 257
2. TYPICAL VOICE GUIDANCE PROMPTS.................................. 258
3. EDITING ROUTE ......................... 259
ADDING DESTINATIONS ................... 260
REORDERING DESTINATIONS ......... 260
DELETING DESTINATIONS ............... 260
SETTING ROUTE PREFERENCES ... 260
SELECTING ROUTE TYPE ................ 261
DETOUR SETTING ............................. 261
STARTING FROM ADJACENT ROAD ................................................ 262
1. MEMORY POINTS SETTINGS .... 263
SETTING UP HOME ........................... 264
SETTING UP PRESET DESTINATIONS................................ 265
SETTING UP ADDRESS BOOK ......... 267
SETTING UP AREAS TO AVOID ........ 269
DELETING PREVIOUS DESTINATIONS................................ 271
1. DETAILED NAVIGATION SETTINGS ................................. 272
SCREENS FOR NAVIGATION
SETTINGS ........................................ 272
2. TRAFFIC SETTINGS................... 276
SCREEN FOR TRAFFIC SETTINGS ........................................ 276
AUTO AVOID TRAFFIC....................... 277
MY TRAFFIC ROUTES ....................... 278
1. GPS (GLOBAL POSITIONING SYSTEM) .................... ............... 282
LIMITATIONS OF
THE NAVIGATION SYSTEM ............ 282
2. MAP DATABASE VERSION AND COVERED AREA ............. 284
MAP INFORMATION ........................... 284
ABOUT THE MAP DATA ..................... 285
3ROUTE GUIDANCE
4MEMORY POINTS
5SETUP
6TIPS FOR THE NAVIGATION
SYSTEM
NAVIGATION SYSTEM
*: Entune Premium Audio only
*

220
1. BASIC OPERATION
1. QUICK REFERENCE
MAP SCREEN
To display this screen, press the “APPS” button, then select “Navigation” on the
“Apps” screen.
No.NameFunctionPage
2D North-up, 2D
heading-up or 3D
heading-up sym-
bolIndicates whether the map orientation is set to
north-up or heading-up. The letter(s) beside this
symbol indicate the vehicle’s heading direction
(e.g. N for north). In 3D map, only a heading-up
view is available.
224
Options buttonSelect to display the “Navigation Options” screen.222
“GPS” mark
(Global Position-
ing System)Shows that the vehicle is receiving signals from
the GPS.282
Traffic indicator
Shows that traffic information is received. Select
to start voice guidance for traffic information.
When traffic information is received via HD, HD
mark is displayed on the right.
233
Scale indicatorThis figure indicates the map scale.223