headrest TOYOTA SIENNA 2007 Service Repair Manual

SEAT – REAR NO. 2 SEAT ASSEMBLY (for Power Seat Type LH Side)SE–99
SE
(c) Pull the lever under the No. 2 seat cushion sub-
assembly and remove the rear No. 2 seat assembly.
DISASSEMBLY
1. REMOVE REAR NO. 2 SEAT COVER BEZEL
(a) Remove the 5 screws.
(b) Disengage the 5 claws and remove the rear No. 2
seat cover bezel.
2. REMOVE REAR SEAT RECLINING COVER LH
(a) Remove the 2 screws.
(b) Disengage the claw and remove the rear seat
reclining cover LH.
3. REMOVE REAR SEAT RECLINING COVER RH
(a) Remove the 2 screws.
(b) Disengage the claw and remove the rear seat
reclining cover RH.
4. REMOVE REAR SEAT HEADREST ASSEMBLY
B126839
B126841
B126842
B126843

SE–100SEAT – REAR NO. 2 SEAT ASSEMBLY (for Power Seat Type LH Side)
SE
5. REMOVE REAR NO. 2 SEAT HEADREST SUPPORT
ASSEMBLY LH
(a) Remove the 2 pads.
(b) Remove the 2 clips.
(c) Remove the 23 hog rings and disconnect the No. 2
seatback cover sub-assembly with pad.
(d) Turn back the No. 2 seatback cover sub-assembly.
(e) Disengage the 4 claws and remove both rear No. 2
seat headrest support assemblies LH.
6. REMOVE REAR NO. 2 SEAT HEADREST SUPPORT
ASSEMBLY RH
HINT:
Use the same procedure described for the LH side.
B126844
B126846
B126847E01
B126845