emergency towing TOYOTA SIENNA 2008 XL20 / 2.G Owners Manual
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2008, Model line: SIENNA, Model: TOYOTA SIENNA 2008 XL20 / 2.GPages: 572, PDF Size: 11.04 MB
Page 488 of 572
08 SIENNA_U (L/O 0801)
480
2008 SIENNA from Aug. ’08 Prod. (OM45455U)
4. After the tire is lowered completelyto the ground, remove the holding
bracket.
When storing the spare tire, put it in
place with the outer side of the wheel
facing up. Then secure the tire, taking
care that the tire goes straight up
without catching on any other part, to
prevent it from flying forward during
a collision or sudden braking.
As the tire carrier is designed for the
compact spare tire, the standard tire
cannot be stored there.
CAUTION
Do not remove the spare tire
when jacking up the vehicle. The
tire carrier and the spare tire may
interfere with the jack and cause
a serious accident.
NOTICE
To secure spare tire clamp
bolt:
Do not use impact wrench,
but wheel nut wrench.
After taking out or stowing
the spare tire, make sure to
secure the tire carrier by
tightening the clamp bolt to
prevent the holding bracket
from hitting the under body
of the vehicle during driving.
Do not store the flat spare
tire with the tire carrier so it
may not be held securely.
1. Get the required tools and
spare tire.
1. Wheel nut wrench
2. Jack handle
3. Jack
4. Spare tire (vehicles with stan- dard tires)
To prepare yourself for an emergency,
you should familiarize yourself with
the use of the jack, each of the tools
and their storage locations.
A spare tire is not provided on ve-
hicles with run −flat tires.
— R eq u ired to o ls an d sp are
tire (All wheel drive models)