open gas tank TOYOTA SIENNA 2013 XL30 / 3.G Owners Manual

813
6-1. Specifications
6
Vehicle specifications
SIENNA_OM_OM45472U_(U)
Fuel infor mation
■Fuel tank opening fo r unleaded gasoline
To help prevent incorrect fueling, your Toyota has a fuel tank opening that
only accommodates the special nozzle on unleaded fuel pumps.
■ Gasoline quality
In very few cases, driveability problems may be caused by the brand of gas-
oline you are using. If driveability problems persist, try changing the brand of
gasoline. If this does not correct the problem, consult your Toyota dealer.
■ Gasoline quality standards
● Automotive manufacturers in the U.S.A., the Europe and Japan have
developed a specification for fuel quality called World-Wide Fuel Charter
(WWFC), which is expected to be applied worldwide.
● The WWFC consists of four categories that are based on required emis-
sion levels. In the U.S., category 4 has been adopted.
● The WWFC improves air quality by lowering emissions in vehicle fleets,
and improves customer satisfaction through better performance.
You must only use unleaded gasoline in your vehicle.
Select octane rating 87 (Research Octane Number 91) or higher. Use
of unleaded gasoline with an octane rating lower than 87 may result
in engine knocking. Persistent kno cking can lead to engine damage.
At minimum, the gasoline you use should meet the specifications
of ASTM D4814 in the U.S.A. and CGSB3.5-M93 in Canada.

876
SIENNA_OM_OM45472U_(U)
GAS STATION INFORMATION
Auxiliary catch leverP. 667Fuel filler doorP. 155
Hood release lever P. 6 6 7Fuel filler door opener P. 1 5 5Tire inflation pressure
P. 810
Back door openerP. 8 2
Fuel tank capacity
(Reference) 20.9 gal. (79 L, 17.4 Imp.gal.)
Fuel typeUnleaded gasoline with an Octane Rating of 87
(Research Octane Number 91)
Cold tire inflation
pressure
P. 8 1 0
Engine oil capacity
(Drain and refill
reference)qt. (L, Imp.qt.)
1AR-FE engine 2GR-FE engine
Without filter 4.2 (4.0 , 3.5) 6.0 (5.7, 5.0)
With filter 4.6 (4.4, 3.9) 6.4 (6.1, 5.4)
Engine oil type Toyota Genuine Motor Oil or equivalent
Oil grade P. 804
1AR-FE engine:
ILSAC multigrade engine oil
2GR-FE engine:
ILSAC GF-5 multigrade engine oil
Recommended oil viscosity:
0W-20