ECO mode TOYOTA SOLARA 2000 Warranties & Maintenance Guides (in English)

When it’s time to replace key wear items on your vehicle, don’ t
settle for less than Genuine Toyota Parts. Available exclusively
through Toyota dealerships, Genuine Toyota Parts meet the
highest standards of quality and performance and are built to
exact factory specifications. Here are a few of your vehicle’s
components that are particularly subject to wear and some
benefits of replacing them with Genuine Toyota Parts.
Genuine Toyota Platinum Spark Plugs*
•Designed to last at least 60,000 miles.
•Provide the maximum spark required by Toyota’s high-
compression engines.
•Resist fouling and misfires for more efficient combustion
and better fuel economy.
Genuine Toyota Brake Pads
•Friction materials selected for optimum performance when
matched with Toyota brake drums or rotors.
•Precision- machined backing plates allow pads to move freely
within the calipers for smooth, efficient braking.
Genuine Toyota Wiper Inserts
•Cut to match the exact length and shape of your vehicle’s
wiper blades for a proper and secure fit.
•Constructed of compression- molded natural rubber — not
synthetic — for superior wiping performance.
TOYOTA MAINTENANCE & REPAIR SUPPORT
Do-It-Yourself Products
12
* Available for selected models. See your dealer for details.

SCHEDULED MAINTENANCE LOGS21 Brake Linings/Drums and Brake Pads/Discs
Check the brake linings (shoes) and drums for scoring, burning,
fluid leakage, broken parts and excessive wear. Check the pads for
excessive wear and the discs for runout, excessive wear and fluid
leakage. A qualified technician should perform these inspections.
Charcoal Canister (CA, MA and NY vehicles)
Check for internal damage and clogging. If necessary, clean
with compressed air or replace. A qualified technician should
perform these operations.
Differential Oil
Inspect each component for signs of leakage. If you discover any
leakage, have it repaired by a qualified technician immediately.
Drive Belts
Inspect for cracks, excessive wear and oiliness. Check the belt ten-
sion and adjust if necessary. Replace the belts if they are damaged.
Drive Shaft Boots
Check the drive shaft boots and clamps for cracks, deteriora-
tion and damage. Replace any damaged parts and, if necessary,
repack the grease. Selected models also require periodic inspec-
tion of the drive shaft bolt for proper torque. A qualified
technician should perform these operations.
Engine Air Filter
Check for damage, excessive wear and oiliness. Replace if necessary.
Engine Coolant
Drain and flush the cooling system and refill with an ethylene-
glycol type coolant. A qualified technician should perform
this operation.
Engine Oil and Oil Filter
Change the oil filter and replace the engine oil with API SJ,
Energy- Conserving II multigrade or ILSAC multigrade oil.
For recommended viscosity, refer to your
Owner’s Manual.
Explanation of Maintenance Items