recommended oil TOYOTA SUPRA 1995 Service Owner's Manual
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 1995, Model line: SUPRA, Model: TOYOTA SUPRA 1995Pages: 2543, PDF Size: 53.25 MB
Page 1841 of 2543
RECOMMENDED TOOLS
09924±12361 Deep socket Wrench 36.
09025±00010 Torque Wrench (30 kgfcm)
09031±00030 Pin Punch.
(2JZ±GTE M/T)
Drive pinion nut removal
and installation
Differential preload
(Conventional differential only)
Pinion shaft removal
EQUIPMENT
Dial indicator with magnetic base
Micrometer
Torque wrench
Vernier calipers
SSM (SPECIAL SERVICE MATERIALS)
08826±00090 Seal Packing 1281,
THREE BOND 1281 or equivalent
(FIPG)
Differential carrier X Cover
08833±00100 THREE BOND 1360K or equivalent
Differential case X Ring gear
LUBRICANT
Item
Capacity
Classification
Differential oil
1.35 liters (1.43 US qts, 1.19 lmp.qts)
API GL±5 Hypoid gear oil
[Above ± 18°C (0°F)]
SAE 90
[Below ± 18°C (0°F)]
SAE 80W or 80W±90
SA±56± SUSPENSION AND AXLEREAR DIFFERENTIAL
Page 2014 of 2543
(See page EG±20)
Check idle speed.
Proceed to matrix chart of problem symp-
toms on page EG±514.
(1) Shift transmission into ªNº position.
(2) Warm up engine to normal operating tempera±
ture.
(3) Switch OFF all accessories.
(4) Switch OFF air conditioning.
(5) Connect tachometer test probe to terminal
IG of data link connector 1.
Check Idle speed.
Idle speed: 650 50 rpm
Never allow tachometer test probe to touch
ground as it could result in damage to igniter
and/or ignition coil.
As some tachometers are not compatible
with this ignition system, we recommended
that you confirm the compatibility of your
unit before use.
Check ignition timing.
(1) Shift transmission into ªNº position.
(2) Warm up engine to normal operating tempera±
ture.
(3) Keep the engine speed at idle.
(4) Using SST, connect terminals TE1 and E1 of
data link connector 1.
SST 09843±18020
(5) Connect a timing light clip to the check wire.
(See page EG±20)
Check ignition timing.
Ignition timing: 10 2° BTDC @ idle
Proceed to matrix chart of problem symp-
toms on page EG±514.
Proceed to page EG±518 and continue to
troubleshoot.
± ENGINE2JZ±GTE ENGINE TROUBLESHOOTINGEG±507