steering wheel adjustment TOYOTA SUPRA 1995 Service Repair Manual

GENERAL INSPECTION
1. INSPECT TIRE
(a) Check the tires for wear and for the proper inflation pressure.
Cold tire inflation pressure (2JZ±GE)
 
 Tire size 
 
Front
kPa (kgf/cm2, psi)
 
 
Rear
kPa (kgf/cm2, psi)
 225/50ZR16 230 (2.3, 33) ±±
 245/50ZR16 ±± 250 (2.5, 36)
Cold tire inflation pressure (2JZ±GTE)
 
 
Tire size 
 
Front
kPa (kgf/cm2, psi)
 
 
Rear
kPa (kgf/cm2, psi)
 235/45ZR17 250 (2.5, 36) ±±
 255/40ZR17 ±± 250 (2.5, 36)
(b) Check the tire runout.
Tire runout:
Less than 1.4 mm (0.055 in.)
2. INSPECT WHEEL BALANCE
(a) Check and adjust the Off±the±car balance.
(b) If necessary, check and adjust the On±the±car balance.
Unbalance after adjustment:
5.0 g (0.011 lb) or less
3. CHECK WHEEL BEARING LOOSENESS
(a) Check the backlash in bearing shaft direction.
Maximum: 0.05 mm (0.0020 in.)
(b) Check the axle hub deviation.
Maximum: 0.05 mm (0.0020 in.)
4. CHECK FRONT SUSPENSION FOR LOOSENESS
5. CHECK STEERING LINKAGE FOR LOOSENESS
6. CHECK BALL JOINT FOR LOOSENESS
7. CHECK SHOCK ABSORBER WORK PROPERLY
wCheck for oil leak
wCheck mounting bushings for wear
wBounce front and rear of the vehicle
± SUSPENSION AND AXLEGENERAL INSPECTIONSA±3