air bleeding TOYOTA T100 1996 Factory Service Manual

Downloaded from www.Manualslib.com manuals search engine R12874
BR08Q−01
R12851
R12852
Z03605
BR−4
− BRAKEBRAKE FLUID
1609 Author: Date:
1996 TOYOTA T100 (RM449U)
BRAKE FLUID
BLEEDING
HINT:
If any work is done on the brake system or if air is suspected in
the brake lines, bleed the system of air.
NOTICE:
Do not let brake fluid remain on a painted surface. Wash it
off immediately.
1. FILL BRAKE RESERVOIR WITH BRAKE FLUID
Check the fluid level in the reservoir after bleeding each wheel.
Add fluid, if necessary.
2. BLEED MASTER CYLINDER
HINT:
If the master cylinder was disassembled or if the reservoir be-
comes empty, bleed the air from the master cylinder.
(a) Disconnect the brake lines from the master cylinder.
(b) Slowly depress the brake pedal and hold it.
(c) Block off the outlet plug with your finger, and release the
brake pedal.
(d) Repeat (b) and (c) 3 or 4 times.
3. CONNECT VINYL TUBE TO WHEEL CYLINDER
BLEEDER PLUG
Insert the other end of the tube in a half−full container of brake
fluid.
HINT:
Begin air bleeding from the wheel cylinder with the longest hy-
draulic line.
4. BLEED BRAKE LINE
(a) Slowly depress the brake pedal several times.