'99 Tacoma (U)
184
ÐAfter changing wheels
11. Check the air pressure of the re- placed tire.
Adjust the air pressure to the specification
designated in Part 8. If the pressure is
lower, drive slowly to the nearest service
station and fill to the correct pressure.
Do not forget to reinstall the tire inflation
valve cap as dirt and moisture could get
into the valve core and possibly cause air
leakage. If the cap is missing, have a new
one put on as soon as possible.
12. Restow all the tools, jack and flat tire securely.
As soon after changing wheels as pos-
sible, tighten the wheel nuts to the torque
specified in Part 8 with a torque wrench
and have a technician repair the flat tire.
CAUTION
Before driving, make sure all the
tools, jack and flat tire are securely
in place in their storage location to
reduce the possibility of personal in-
jury during a collision or s udden
braking.
(a) Towing with wheel lift type truckÐ
ÐFrom front
ÐFrom rear
(b) Using flat bed truck
Two- wheel drive models(a) Towing with wheel lift type truckÐ ÐFrom front
ÐFrom rear
(b) Using flat bed truck
Four- wheel drive models
If your vehicle needs to be
towedÐ
'99 Tacoma (U)
239
Tires
Fuses
Engine compartment (U.S.A.)
Fuses (type A) 1. PWR OUTLET 15 A: Power outlet
2. DRL 7.5 A: Daytime running light
system
3. HEAD (HI RH) 10 A: Right- hand head-
light (high beam), high beam indicator
light
4. HEAD (HI LH) 10 A: Left- hand head-
light (high beam)
5. HEAD (LO RH) 10 A: Right- hand
headlight (low beam)
Wheel nut torque, N´m (kgf´m, ft´lbf):
110 (11.5, 83) Tire size
Tire pressure
kPa (kgf/cm 2
or bar, psi)
Wheel size
Front Rear
P195/75R14 200 (2.0, 29) 240 (2.4, 35) 14 5J
P215/70R14 200 (2.0, 29) 200 (2.0, 29) 14
6J
14 6JJ
P225/75R15 180 (1.8, 26) 200 (2.0, 29)15
6J
15 7J
15 7JJ
31x10.5R15LT 180 (1.8, 26) 200 (2.0, 29) 15
7J
15 7JJP265/75R15
180 (1.8, 26) 180 (1.8, 26) 15
7J
15 7JJ
