navigation TOYOTA TACOMA 2015 Accessories, Audio & Navigation (in English)

164
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
1Display the message inbox screen.
(P.161)
2Select the desired message from the
list.
3Select “Quick Message” .
4Select the desired message.
5Select “Send” .
While the message is being sent, a send-
ing message screen is displayed.
 To cancel sending the message, select
“Cancel” .
■EDITING QUICK REPLY MESSAG-
ES
1Select “Quick Message” .
2Select corresponding to the de-
sired message to edit.
3Select “OK” when editing is complet-
ed.
REPLYING TO A MESSAGE
(QUICK REPLY)
15 messages have already been
stored.This operation cannot be performed
while driving.
INFORMATION
● To reset the edited quick reply
messages, select “Default”.
 Entune Premium Audio
● “Quick Message 1” (“I am driving and
will arrive in approximately [ETA]
minutes.”) :
This message cannot be edited and will
automatically fill in [ETA] with the
navigation calculated estimated time of
arrival on the confirm message screen.
If there are waypoints set, [ETA] to the
next waypoint will be shown.
If there is no route currently set in the
navigation system, “Quick Message 1”
cannot be selected.

184
1. QUICK REFERENCE ................... 186
MAP SCREEN ..................................... 186
NAVIGATION OPTIONS SCREEN...... 188
2. MAP SCREEN OPERATION ....... 189
CURRENT POSITION DISPLAY ......... 189
MAP SCALE ........................................ 189
ORIENTATION OF THE MAP ............. 190
SWITCHING THE MAP MODE............ 191
SCREEN SCROLL OPERATION ........ 193
ADJUSTING LOCATION IN SMALL INCREMENTS................................... 194
3. MAP SCREEN INFORMATION ... 195
DISPLAYING MAP INFORMATION .... 195
DISPLAYING INFORMATION ABOUT THE ICON WHERE
THE CURSOR IS SET ...................... 197
STANDARD MAP ICONS .................... 198
4. TRAFFIC INFORMATION ............ 199
DISPLAYING TRAFFIC INFORMATION ON THE MAP .......... 201
1. DESTINATION SEARCH SCREEN .................................... 202
2. SEARCH OPERATION.. .............. 204
SELECTING SEARCH AREA .............. 205
SETTING HOME AS DESTINATION ... 205
SETTING PRESET DESTINATIONS
AS DESTINATION ............................. 205
SEARCHING BY ADDRESS ................ 206
SEARCHING BY POINT OF INTEREST ......................................... 207
SEARCHING FROM PREVIOUS DESTINATIONS ................................ 211
SEARCHING BY ADDRESS BOOK .... 211
SEARCHING BY EMERGENCY .......... 212
SEARCHING BY INTERSECTION AND FREEWAY ................................ 212
SEARCHING BY MAP ......................... 214
SEARCHING BY COORDINATES ....... 214
3. STARTING ROUTE GUIDANCE ....... ......................... 215
STARTING ROUTE GUIDANCE.......... 215
PAUSING GUIDANCE ......................... 218
1BASIC OPERATION2DESTINATION SEARCH
NAVIGATION SYSTEM
*: Entune Premium Audio only
*

185
1
2
3
4
5
6
7
8
9
1. ROUTE GUIDANCE SCREEN ..... 219
SCREEN FOR ROUTE GUIDANCE ... 219
ROUTE OVERVIEW............................ 220
DURING FREEWAY DRIVING............ 221
WHEN APPROACHING INTERSECTION ............................... 222
TURN LIST SCREEN .......................... 223
TURN-BY-TURN ARROW SCREEN ... 223
2. TYPICAL VOICE GUIDANCE PROMPTS.................................. 224
3. EDITING ROUTE ......................... 225
ADDING DESTINATIONS ................... 226
REORDERING DESTINATIONS ......... 226
DELETING DESTINATIONS ............... 226
SETTING ROUTE PREFERENCES ... 226
SELECTING ROUTE TYPE ................ 227
DETOUR SETTING ............................. 227
STARTING FROM ADJACENT ROAD ................................................ 228
1. MEMORY POINTS SETTINGS .... 229
SETTING UP HOME ........................... 230
SETTING UP PRESET DESTINATIONS................................ 231
SETTING UP ADDRESS BOOK ......... 233
SETTING UP AREAS TO AVOID ........ 235
DELETING PREVIOUS DESTINATIONS................................ 237
1. DETAILED NAVIGATION SETTINGS ................................. 238
SCREENS FOR NAVIGATION
SETTINGS ........................................ 238
2. TRAFFIC SETTINGS................... 242
SCREEN FOR TRAFFIC SETTINGS ........................................ 242
AUTO AVOID TRAFFIC....................... 243
MY TRAFFIC ROUTES ....................... 244
1. GPS (GLOBAL POSITIONING SYSTEM) .................... ............... 248
LIMITATIONS OF THE
NAVIGATION SYSTEM..................... 248
2. MAP DATABASE VERSION AND COVERED AREA ............. 250
MAP INFORMATION ........................... 250
ABOUT THE MAP DATA ..................... 251
3ROUTE GUIDANCE
4MEMORY POINTS
5SETUP
6TIPS FOR THE NAVIGATION
SYSTEM

186
1. BASIC OPERATION
1. QUICK REFERENCE
MAP SCREEN
To display this screen, press the “APPS” button, then select “Navigation” on the
“Apps” screen.
No.NameFunctionPage
2D North-up, 2D
heading-up or 3D
heading-up sym-
bolIndicates whether the map orientation is set to
north-up or heading-up. The letter(s) beside this
symbol indicate the vehicle’s heading direction
(e.g. N for north). In 3D map, only a heading-up
view is available.
190
Options buttonSelect to display the “Navigation Options” screen.188
“GPS” mark
(Global Position-
ing System)Shows that the vehicle is receiving signals from
the GPS.248
Traffic indicator
Shows that traffic information is received. Select
to start voice guidance for traffic information.
When traffic information is received via HD, HD
mark is displayed on the right.
199
Scale indicatorThis figure indicates the map scale.189

187
1. BASIC OPERATION
NAVIGATION SYSTEM
8
Zoom in/out but-
tonSelect to magnify or reduce the map scale. When
either button is selected, the map scale indicator
bar appears at the bottom of the screen.
189
Footprint map
buttonSelect to display the footprint map screen.190
Current position
button/voice
guidance buttonSelect to display the current position address.
 Select to repeat voice guidance.189
Destination but-
tonSelect to display the “Destination” screen.202
Speed limit iconIndicates the speed limit on the current road. The
display of the speed limit icon can be set to on/off.189
Route informa-
tion bar
Displays the current street name, or the distance
with the estimated travel time/arrival time to the
destination. The route information bar fills from
left to right as the vehicle progresses on the
route.
219
Route informa-
tion buttonSelect to change the display between the current
street name and the distance with the estimated
travel/arrival time.220
No.NameFunctionPage

188
1. BASIC OPERATION
NAVIGATION OPTIONS SCREEN
The navigation options allow you to change map configurations, display/hide POI
icons, and edit the navigation routes. To display the “Navigation Options” screen,
press the “APPS” button, select “Navigation” on the “Apps” screen, and select
“Options” on the map screen.
No.FunctionPage
Select to display the desired map configuration.191
Select to set display of the map information such as POI icons, route
trace, speed limit, etc.195
Select to display the map version and coverage area.250
Select to edit the set route.225
Select to pause or resume route guidance.218
Select to display the overview of the entire route.220

189
1. BASIC OPERATION
NAVIGATION SYSTEM
8
2. MAP SCREEN OPERATION
1Press the “APPS” button.
2Select “Navigation” .
3Check that the current position map is
displayed.
1Select or to change the
scale of the map screen.
The scale indicator bar appears at the bot-
tom of the screen.
 Select and hold or to con-
tinue changing the scale of the map
screen.
 The scale of the map screen can also be
changed by selecting the scale bar
directly. This function is not available while
driving.
CURRENT POSITION
DISPLAY
To correct the current position manu-
ally:
P. 2 4 0
INFORMATION
● While driving, the current position mark
is fixed on the screen and the map
moves.
● The current position is automatically set
as the vehicle receives signals from the
GPS (Global Positioning System). If the
current position is not correct, it is auto-
matically corrected after the vehicle
receives signals from the GPS.
● After the battery disconnection, or on a
new vehicle, the current position may
not be correct. As soon as the system
receives signals from the GPS, the cor-
rect current position is displayed.
MAP SCALE
INFORMATION
●The map scale is displayed above the
zoom in button at the bottom left of the
screen.
● In areas where the footprint map is avail-
able the map scale changes from
to when at the minimum range.

191
1. BASIC OPERATION
NAVIGATION SYSTEM
8
: North-up symbol
Regardless of the direction of vehicle trav-
el, north is always up.
: Heading-up symbol
The direction of vehicle travel is always up.
: 3D Heading-up symbol
The direction of vehicle travel is always up.
 The letter(s) beside this symbol indicate
the vehicle’s heading direction (e.g. N for
north).
1Select “Options” on the map screen.
2Select “Map Mode” .
3Select the desired configuration but-
ton.
Depending on the conditions, certain
screen configuration buttons cannot be
selected.
SWITCHING THE MAP MODE
No.FunctionPage
Select to display the single
map screen. 192
Select to display the dual
map screen.192
Select to display the com-
pass mode screen.193
Select to display the turn list
screen.223
Select to display the free-
way exit list screen.221
Select to display the inter-
section guidance screen or
the guidance screen on the
freeway.
222
Select to display the turn-
by-turn arrow screen.223

193
1. BASIC OPERATION
NAVIGATION SYSTEM
8
■COMPASS
To scroll over the map screen, place the
cursor mark in the desired position and
then press and hold the map screen. The
map will continue scrolling in that direction
until the finger is released.
Information about the destination, cur-
rent position and a compass is dis-
played on the screen.
INFORMATION
● The destination mark is displayed in the
direction of the destination. When driv-
ing, refer to the longitude and latitude
coordinates, and the compass, to make
sure that the vehicle is headed in the
direction of the destination.
● When the vehicle travels out of the cov-
erage area, the guidance screen
changes to the whole compass mode
screen.
SCREEN SCROLL
OPERATION
Use the scroll feature to move the de-
sired point to the center of the screen
for looking at a point on the map that is
different from the current position.
No.Information/Function
Cursor mark
Distance from the current position to
the cursor mark.
Select to set as a destination.
When selecting “Go to ” on the
following map screen, the navigation
system performs a search for the
route. ( P.215)
If a destination has already been set,
“Go to ” and “Add to Route” will
be displayed.
“Go to ” : Select to delete the ex-
isting destination(s) and set a new
one.
“Add to Route” : Select to add a
destination.
Select to register as a memory point.
To change the icon, name, etc.:
 P.233
Select to return to the current posi-
tion.

195
1. BASIC OPERATION
NAVIGATION SYSTEM
8
3. MAP SCREEN INFORMATION
1Select “Options” on the map screen.
2Select “Map Information” .
3Select the desired items to be dis-
played.
When set to on, the indicator will illumi-
nate.
1Display the “Map Information” screen.
(P.195)
2Select “Select POI” .
When the POI icons to be displayed on
the map screen have already been set,
“Change POI” is displayed.
3Select the desired POI category and
select “OK”.
DISPLAYING MAP
INFORMATION
Information such as POI icons, route
trace, speed limit, etc. can be dis-
played on the map screen.
No.FunctionPage
Select to display the select-
ed POI icons.
Select to select or change
POI icons.195
Select to display route
trace.197
Select to display speed limit
icon.
Select to display traffic infor-
mation.199
SELECTING THE POI ICONS
No.Information/FunctionPage
Displays up to 5 selected
POI icons on the map
screen

Select to cancel the select-
ed POI icons.
Displays up to 6 POI icons
as favorite POI categories239
Select to display other POI
categories if the desired
POIs cannot be found on
the screen.
196
Select to search for the
nearest POIs.196