TOYOTA TERCEL 1996 Service Repair Manual
Manufacturer: TOYOTA, Model Year: 1996, Model line: TERCEL, Model: TOYOTA TERCEL 1996Pages: 1202, PDF Size: 17.43 MB
Page 971 of 1202
RS0QB-03
H17548
H14642
Horn Button Contact Plate
N12248
- SUPPLEMENTAL RESTRAINT SYSTEMSTEERING WHEEL PAD AND SPIRAL CABLE
RS-9
1996 TERCEL (RM440U)
INSPECTION
1. VEHICLE NOT INVOLVED IN COLLISION
(a) Do a diagnostic system check (See page DI-148).
(b) Do a visual check which includes the following items with
the steering wheel pad (with airbag) installed in the ve-
hicle.
Check for cuts, minute cracks or marked discoloration of
the steering wheel pad top surface and grooved portion.
2. VEHICLE INVOLVED IN COLLISION AND AIRBAG IS
NOT DEPLOYED
(a) Do a diagnostic system check (See page DI-148).
(b) Do a visual check which includes the following items with
the steering wheel pad (with airbag) installed in the ve-
hicle.
Check for cuts and cracks in, or marked discolor-
ation of the steering wheel pad top surface and
grooved portion.
Check for cuts and cracks in wire harnesses, and for
chipping in connectors.
Check for deformation of the horn button contact
plate of the steering wheel.
HINT:
If the horn button contact plate of the steering wheel is de-
formed, never repair it. Always replace the steering wheel
assembly with a new one.
There should be no interference between the steering
wheel pad and the steering wheel, and the clearance
should be uniform all the way around when the new steer-
ing wheel pad is installed on the steering wheel.
Page 972 of 1202
RS-10
- SUPPLEMENTAL RESTRAINT SYSTEMSTEERING WHEEL PAD AND SPIRAL CABLE
1996 TERCEL (RM440U)
CAUTION:
For removal and installation of the steering wheel pad, see
page SR-13 and SR-20, and be sure to follow the correct
procedure.
3. VEHICLE INVOLVED IN COLLISION AND AIRBAG IS
DEPLOYED
(a) Do diagnostic system check (See page DI-148).
(b) Do a visual check which includes the following items with
the steering wheel pad (with airbag) removed from the ve-
hicle.
Check for deformation of the horn button contact
plate of the steering wheel.
Check for damage to the spiral cable connector and
wire harness.
HINT:
If the horn button contact plate of the steering wheel is de-
formed, never repair it. Always replace the steering wheel
assembly with a new one.
There should be no interference between the steering
wheel pad and the steering wheel, and the clearance
should be uniform all the way around when the new steer-
ing wheel pad is installed on the steering wheel.
Page 973 of 1202
RS0QC-02
AB0152
SST
- SUPPLEMENTAL RESTRAINT SYSTEMSTEERING WHEEL PAD AND SPIRAL CABLE
RS-1 1
1996 TERCEL (RM440U)
DISPOSAL
HINT:
When scrapping vehicle equipped with an SRS or disposing of
a steering wheel pad, always first deploy the airbag in accor-
dance with the procedure described below. If any abnormality
occurs with the airbag deployment, contact the SERVICE
DEPT. of TOYOTA MOTOR SALES, U.S.A., INC.
When disposing of a steering wheel pad with an airbag
deployed in a collision, follow the same procedure given in step
1-(d) in ºDISPOSALº.
CAUTION:
Never dispose of a steering wheel pad which has an
undeployed airbag.
The airbag produces a sizeable exploding sound
when it deploys, so perform the operation out-of-
doors and where it will not create a nuisance to
nearby residents.
When deploying the airbag, always use the specified
SST (SRS Airbag Deployment Tool). Carry out opera-
tion in a place away from electrical noise.
SST 09082-00700
When deploying an airbag, do it at least 10 m (33 ft)
away from the steering wheel pad.
The steering wheel pad is very hot when the airbag is
deployed, so leave it alone for at least 30 minutes af-
ter deployment.
Use gloves and safety glasses when handling a steer-
ing wheel pad with a deployed airbag.
Do not apply water, etc. to a steering wheel pad with
a deployed airbag.
Always wash your hands with water after completing
the operation.
Page 974 of 1202
AB0158
Battery
SST
AB0152
SST
AB0158
Battery
SST
H01580
SST
N12265
RS-12
- SUPPLEMENTAL RESTRAINT SYSTEMSTEERING WHEEL PAD AND SPIRAL CABLE
1996 TERCEL (RM440U)
1. AIRBAG DEPLOYMENT WHEN SCRAPPING VE-
HICLE
HINT:
Have a battery ready as the power source to deploy the airbag.
(a) Check functioning of the SST.
CAUTION:
When deploying the airbag, always use the specified SST:
SRS Airbag Deployment Tool.
SST 09082-00700
(1) Connect the SST to battery.
Connect the red clip of the SST to the battery posi-
tive (+) terminal and the black clip to the battery neg-
ative (-) terminal.
HINT:
Do not connect the yellow connector which connects with the
SRS.
(2) Check functioning of the SST.
Press the SST activation switch, and confirm the
LED of the SST activation switch lights up.
CAUTION:
If the LED lights up when the activation switch is not being
pressed, SST malfunction is probable, so definitely do not
use the SST.
(b) Disconnect the airbag connector.
(1) Remove the No.1 under cover.
(2) Disconnect the airbag connector of the spiral cable.
Page 975 of 1202
H14726
R13455
10 m (33 ft) or moreu"
- SUPPLEMENTAL RESTRAINT SYSTEMSTEERING WHEEL PAD AND SPIRAL CABLE
RS-13
1996 TERCEL (RM440U)
(c) Install the SST.
(1) Connect the SST connector to the airbag connec-
tor.
SST 09082-00700
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock.
(2) Move the SST to at least 10 m (33 ft) away from the
front of the vehicle.
(3) Close all the doors and windows of the vehicle.
NOTICE:
Take care not to damage the SST wire harness.
(4) Connect the SST red clip to the battery positive (+)
terminal and the black clip to the negative (+) termi-
nal.
(d) Deploy the airbag.
(1) Confirm that no-one is inside the vehicle or within
10 m (33 ft) of the vehicle.
(2) Press the SST activation switch and deploy the air-
bag.
HINT:
The airbag deploys simultaneously as the LED of the SST ac-
tivation switch lights up.
(e) Dispose of the steering wheel pad.
CAUTION:
The steering wheel pad is very hot when the airbag is
deployed, so leave it alone for at least 30 minutes af-
ter deployment.
Use gloves and safety glasses when handling a steer-
ing wheel pad with a deployed airbag.
Do not apply water, etc. to a steering wheel pad with
a deployed airbag.
Always wash your hands with water after completing
the operation.
(f) When scrapping a vehicle, deploy the airbag and scrap
the vehicle with the steering wheel pad still installed.
2. DEPLOYMENT WHEN DISPOSING OF STEERING
WHEEL PAD ONLY
NOTICE:
When disposing of the steering wheel pad only, never use
the customers vehicle to deploy the airbag.
HINT:
Have a battery ready as the power source to deploy the airbag.
(a) Remove the steering wheel pad.
Page 976 of 1202
AB0163
Wire Harness
Diameter
Stripped Wire Harness Section
RS-14
- SUPPLEMENTAL RESTRAINT SYSTEMSTEERING WHEEL PAD AND SPIRAL CABLE
1996 TERCEL (RM440U)
CAUTION:
When storing the steering wheel pad, keep the deployment
direction facing up.
(b) Fix the steering wheel pad.
(1) Using a service-purpose wire harness for the ve-
hicle tie down the steering wheel pad to the disc
wheel
Wire harness: Stripped wire harness section
1.25 mm
2 or more (0.0019 in.2 or more).
CAUTION:
If a wire harness which is too thin or some other thing is
used to tie down the steering wheel pad, it may be snapped
by the shock when the airbag is deployed. This is highly
dangerous. Always use a wire harness for vehicle use
which is at least 1.25 mm
2 (0.0019 in.2).
HINT:
To calculate the square of the stripped wire harness section:
Square = 3.14 X (Diameter)
2 divided by 4
(2) Remove the connector on the steering wheel pad
rear surface from the inflater cover.
(3) Install the bolts and washers in the 3 bolt holes in
the steering wheel pad.
Bolt:
L: 35.0 mm (1.387 in.)
M: 6.0 mm (0.236 in.)
Pitch: 1.0 mm (0.039 in.)
NOTICE:
Tighten the bolts by hand until the bolts become diffi-
cult to turn.
Do not tighten the bolts too much.
Page 977 of 1202
R05751
AB0158
Battery
SST
- SUPPLEMENTAL RESTRAINT SYSTEMSTEERING WHEEL PAD AND SPIRAL CABLE
RS-15
1996 TERCEL (RM440U)
(4) Using 3 wire harness, wrap the wire harness at least
2 times each around the bolts installed on the left
and right sides of the steering wheel pad.
CAUTION:
Tightly wind the wire harness around the bolts so that
there is no slack.
If there is slackness in the wire harness, the steering
wheel pad may come loose due to the shock when the
airbag is deployed. This is highly dangerous.
(5) Face the upper surface of the steering wheel pad
upward. Separately tie the left and right sides of the
steering wheel pad to the disc wheel through the
hub nut holes.
(6) Position the steering wheel pad connector so that
it hangs downward through a hub hole in the disc
wheel.
CAUTION:
Make sure that the wire harness is tight. It is very dan-
gerous if looseness in the wire harness results in the
steering wheel pad coming free through the shock of
the airbag deploying.
Always tie down the steering wheel pad with the pad
side facing upward. It is very dangerous if the steer-
ing wheel pad is tied down with the metal surface fac-
ing to the airbag deploying direction and the steering
wheel pad will be thrown into the air.
HINT:
The disc wheel will be marked by airbag deployment, so when
disposing of the airbag use a redundant disc wheel.
(c) Check functioning of the SST.
(See step 1)
SST 09082-00700
Page 978 of 1202
R05752
SST
AB0164
R04211
Tires
(3 or more)Inner Diam.
Width RS-16
- SUPPLEMENTAL RESTRAINT SYSTEMSTEERING WHEEL PAD AND SPIRAL CABLE
1996 TERCEL (RM440U)
(d) Install the SST.
CAUTION:
Place the disc wheel on level ground.
Connect the SST connector to the steering wheel pad
connector.
SST 09082-00700
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock. Also, pro-
vide some slack for the SST wire harness inside the disc
wheel.
(e) Cover the steering wheel pad with cardboard box or tires.
Covering method using cardboard box:
Cover the steering wheel pad with the cardboard
box and weight the cardboard box down in 4 places
with at least 190 N (20 kg, 44 lb).
Size of cardboard box:
Must exceed the following dimensions:
x= 460 mm (18.11 in.)
When dimension y of the cardboard box exceeds the
diameter of the disc wheel with tire to which the steer-
ing wheel pad is tied -
x= 460 mm (18.11 in.) + width of tire
y= 650 mm (25.59 in.)
NOTICE:
If a cardboard box smaller than the specified size is used,
the cardboard box will be broken by the shock of the airbag
deployment.
Covering method using tires:
Place at least 3 tires without disc wheel on top of the
disc wheel with tire to which the steering wheel pad
is tied.
Tire size: Must exceed the following dimensions-
Width: 185 mm (7.28 in.)
Inner diameter: 360 mm (14.17 in.)
CAUTION:
Do not use tires with disc wheels.
Page 979 of 1202
H0040010 m (33 ft) or more
AB0166
- SUPPLEMENTAL RESTRAINT SYSTEMSTEERING WHEEL PAD AND SPIRAL CABLE
RS-17
1996 TERCEL (RM440U)
NOTICE:
The tires may be marked by the airbag deployment, so use
redundant tires.
(f) Deploy the airbag.
(1) Connect the SST red clip to the battery positive (+)
terminal and the black clip to the battery negative
(-) terminal.
(2) Confirm that no-one is within 10 m (33 ft) area
around the disc wheel to which the steering wheel
pad is tied.
(3) Press the SST activation switch and deploy the air-
bag.
HINT:
The airbag deploys simultaneously as the LED of the SST ac-
tivation switch lights up.
(g) Dispose of the steering wheel pad (with airbag).
CAUTION:
The steering wheel pad is very hot when the airbag is
deployed, so leave it alone for at least 30 minutes af-
ter deployment.
Use gloves and safety glasses when handling a steer-
ing wheel pad with a deployed airbag.
Do not apply water, etc. to a steering wheel pad with
deployed airbag.
Always wash your hands with water after completing
the operation.
(1) Remove the steering wheel pad from the disc
wheel.
(2) Place the steering wheel pad in a vinyl bag, tie the
end tightly and dispose of it in the same way as oth-
er general parts.
Page 980 of 1202
RS031-09
RS-18
- SUPPLEMENTAL RESTRAINT SYSTEMSTEERING WHEEL PAD AND SPIRAL CABLE
1996 TERCEL (RM440U)
REPLACEMENT
REPLACEMENT REQUIREMENTS
In the following case, replace the steering wheel pad, steering wheel and spiral cable.
If the airbag has been deployed.
If the steering wheel pad and spiral cable has been found to be faulty in troubleshooting.
If the steering wheel pad, steering wheel and spiral cable has been found to be faulty during the
check in item (See page RS-9).
If the steering wheel pad and has been dropped.
CAUTION:
For remove and installation of the steering wheel pad See page SR-13, RS-8 and RS-19, and be sure
to follow the correct procedure.