air bleeding TOYOTA TERCEL 1996 Service Repair Manual

BR0RA-07
BR5038
BR5040
BR5039
BR3885
BR-4
- BRAKEBRAKE FLUID
878 Author
: Date
:
1996 TERCEL (RM440U)
BRAKE FLUID
BLEEDING
HINT:
If any work is done on the brake system or air in the brake lines
is suspected, bleed the system of air.
NOTICE:
Do not let brake fluid remain on a painted surface. Wash it
off immediately.
1. FILL BRAKE RESERVOIR WITH BRAKE FLUID
Fluid: SAEJ1703 or FMVSS No.116 DOT3
2. BLEED MASTER CYLINDER
HINT:
If the master cylinder has been disassembled or the reservoir
becomes empty, bleed the master cylinder.
(a) Disconnect the brake lines from the master cylinder.
(b) Slowly depress the brake pedal and hold it.
(c) Block off the outer holes with your finger and release the
brake pedal.
(d) Repeat (b) and (c) 3 or 4 times.
3. BLEED BRAKE LINE
(a) Connect the vinyl tube to the brake caliper.
(b) Depress the brake pedal several times, then loosen the
bleeder plug with the pedal held down.
(c) At the point when fluid stops coming out, tighten the
bleeder plug, then release the brake pedal.
(d) Repeat (b) and (c) until all the air in the fluid has been bled
out.
(e) Repeat the above procedure to bleed the air out of the
brake line for each wheel.