center console TOYOTA TERCEL 1996 Service Repair Manual

MX07X-03
D02991
Shift Lever Knob
Console Box
Lower Center Finish Panel
Clip
Shift Control Cable Grommet
Grommet Retainer
Select Control CableShift Lever Assembly
Retainer
Clip
Clip
Clip
Clip Washer
Washer MX-40
- MANUAL TRANSAXLESHIFT LEVER AND CONTROL CABLE
752 Author
: Date
:
1996 TERCEL (RM440U)
SHIFT LEVER AND CONTROL CABLE
COMPONENTS

Q06564
4
2 AX-12
- AUTOMATIC TRANSAXLE (A242L)AUTOMATIC TRANSAXLE SYSTEM (A242L)
1996 TERCEL (RM440U)
(d) Inspect the O/D main switch.
(1) Remove the center console box.
(2) Using an ohmmeter, check that the continuity of the
terminals 2 and 4 for each switch position.
Switch positionTester connectionSpecified condition
ON2 - 4No continuity
OFF2 - 4Continuity
If the continuity is not as specified, replace the switch.
(3) Install the center console box.

RS03A-15
- SUPPLEMENTAL RESTRAINT SYSTEMAIRBAG SENSOR ASSEMBLY
RS-33
1996 TERCEL (RM440U)
REMOVAL
NOTICE:
Do not open the cover or the case of the ECU and various
computers unless absolutely necessary.
If the IC terminals are touched, the IC may be destroyed by stat-
ic electricity.
1. REMOVE THESE PARTS:
2. REMOVE CONSOLE BOX
3. REMOVE CENTER CLUSTER FINISH PANEL
4. REMOVE LOWER CENTER FINISH PANEL
5. REMOVE REAR AIR DUCT NO.3
6. REMOVE AIRBAG SENSOR ASSEMBLY
(a) Disconnect the connectors.
NOTICE:
Remove of the connector is done with the sensor assembly
installed.
(b) Using a torx wrench remove the 3 screws and the airbag
sensor assembly.
Torx wrench: T40 (Part No. 09042- 00020 or locally
manufactured tool)

BO1IC-04
N15778
No.2 Heater to
Register Duct
Center Heater to
Register Duct
Instrument Panel Reinforcement
AG
AA
G
G
G
G
G
G
A
A Instrument Panel
Brace No.1
Instrument Panel
Brace No.2
Clock Hole Cover
C
CInstrument Panel
Heater
Control
B
B
B
B
DDD
Lower Center Finish Panel
Center Upper
Cluster Finish Panel
Combination
Mater
Steering Column Cover
Front Pillar Garnish
Combination Switch
Cowl Side
Trim
Front Door
Scuff Plate
Instrument Panel
Lower Pad
Lower Center Finish Panel
Steering Wheel
Center Cluster
Finish Panel
Shifting Hole
Bezel
F
F
Ash Receptacle BoxD
D
D
D
Console Box
Lower Instrument Cover
BB
BBHeater Control Panel
Knob
- BODYINSTRUMENT PANEL
BO-45
1139 Author
: Date
:
1996 TERCEL (RM440U)
INSTRUMENT PANEL
COMPONENTS

BO347-01
N12292
N12291
N12055
BO-48
- BODYINSTRUMENT PANEL
1996 TERCEL (RM440U)
REMOVAL
1. REMOVE FRONT PILLAR GARNISHES
2. REMOVE COWL SIDE TRIMS
3. REMOVE FRONT DOOR SCUFF PLATES
4. REMOVE STEERING WHEEL (See page SR-13)
5. REMOVE LOWER INSTRUMENT COVER
(a) Remove the 2 screws and the hood lock release lever.
(b) Remove the 2 hole covers.
(c) Remove the 4 bolts and the lower cover.
6. REMOVE INSTRUMENT PANEL LOWER PAD
7. REMOVE CENTER UPPER CLUSTER FINISH PANEL
8. REMOVE STEERING COLUMN COVERS
9. REMOVE COMBINATION SWITCH
10. REMOVE COMBINATION METER
11. REMOVE LOWER CENTER FINISH PANEL
(a) Remove the 4 bolts and 3 screws.
(b) Remove the instrument finish panel by pulling.
12. DISCONNECT FRONT PASSENGER AIRBAG CON-
NECTOR (See page RS-21)
13. REMOVE SHIFTING HOLE BEZEL
14. REMOVE CONSOLE BOX
15. REMOVE LOWER CENTER FINISH PANEL
16. REMOVE CENTER CLUSTER FINISH PANEL
17. REMOVE ASH RECEPTACLE BOX
18. REMOVE RADIO ASSEMBLY
19. REMOVE HEATER CONTROL PANEL (See page
AC-70)
20. REMOVE JUNCTION BLOCK NO. 1
Remove the 3 screws and J/B No. 1.