engine TOYOTA TUNDRA 2003 1.G Owners Manual
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2003, Model line: TUNDRA, Model: TOYOTA TUNDRA 2003 1.GPages: 345, PDF Size: 6.8 MB
Page 320 of 345

’03 TUNDRA_U (L/O 0307)
311
2003 TUNDRA from Jul. ’03 Prod. (OM 34430U)
kg (lb.)
Standard cab models
5VZ −FE engineTw o −wheel drive models2358 (5200)
Four −wheel drive models2268 (5000)
2UZ −FE engine
Tw o −wheel drive modelsWithout towing package2494 (5500)
With towing package3311 (7300)
Four −wheel drive modelsWithout towing package2450 (5600)
With towing package3357 (7400)
Access cab models
5VZ −FE engineTw o −wheel drive models2268 (5000)
Four −wheel drive models2268 (5000)
2UZ −FE engine
Tw o −wheel drive modelsWithout towing package2494 (5500)
With towing package3311 (7300)
Four −wheel drive modelsWithout towing package2404 (5300)
With towing package3221 (7100)
∗: Trailer weight + car go weight
Towing capacity∗
Page 321 of 345

’03 TUNDRA_U (L/O 0307)
312
2003 TUNDRA from Jul. ’03 Prod. (OM 34430U)
Model:
5VZ− FE and 2UZ −FE
Type: 5VZ− FE engine
6 cylinder V type, 4 cycle, gasoline
2UZ− FE engine
8 cylinder V type, 4 cycle, gasoline
Bore and stroke, mm (in.): 5VZ− FE engine
93.5 82.0 (3.68 3.23)
2UZ− FE engine
94.0 84.0 (3.70 3.31)
Displacement, cm
3 (cu. in.):
5VZ− FE engine 3378 (206.1)
2UZ− FE engine 4664 (284.6)Fuel type:
Unleaded gasoline, Octane Rating 87
(Research Octane Number 91) or higher
Fuel tank capacity, L (gal., Imp. gal.): 100 (26.4, 22.0) ENGINE
Valve clearance (engine cold), mm (in.):
5VZ− FE engine
Intake 0.13—0.23 (0.006—0.009)
Exhaust 0.27—0.37 (0.011—0.014)
2UZ− FE engine
Intake 0.15—0.25 (0.006—0.010)
Exhaust 0.25—0.35 (0.010—0.014)
Spark plug type: 5VZ− FE engine
DENSO K16TR11
NGK BKR5EKB11
2UZ− FE engine
DENSO K20R−U
NGK BKR6EYA
Spark plug gap, mm (in.): 5VZ− FE engine 1.1 (0.043)
2UZ− FE engine 0.8 (0.031)
Drive belt tension measured with Bor-
roughs drive belt tension gauge
No. BT− 33−73F (used belt), lbf:
5VZ− FE engine
Generator belt 100 20
Air conditioning compressor belt 100 20
Power steering pump belt
100
+20
15
Engine FuelService specifications
Page 322 of 345

’03 TUNDRA_U (L/O 0307)
313
2003 TUNDRA from Jul. ’03 Prod. (OM 34430U)
ENGINE LUBRICATION
Oil capacity (drain and refill), L (qt., Imp.
qt.):
5VZ− FE engine
With filter 5.2 (5.5, 4.6)
Without filter 4.9 (5.2, 4.3)
2UZ− FE engine
With filter 6.2 (6.5, 5.5)
Without filter 5.7 (6.0, 5.0)
“Toyota Genuine Motor Oil” is filled in
your Toyota vehicle. Use Toyota approved
“Toyota Genuine Motor Oil” or equivalent
to satisfy the following grade and
viscosity.
Oil grade: API grade SL “Energy −Conserving” or
ILSAC multigrade engine oil Recommended oil viscosity:
SAE 5W −30
Outside temperature
Please contact your Toyota dealer for fur-
ther details.
COOLING SYSTEM
Total capacity, L (qt., Imp. qt.):
With manual transmission 10.0 (10.6, 8.8)
With automatic transmission 5VZ− FE engine 9.9 (10.5, 8.7)
2UZ− FE engine 11.6 (12.3, 10.2) Coolant type:
“Toyota Genuine Long Life Coolant” is
filled in your Toyota vehicle. In order to
avoid technical problems, we strongly
recommend using “Toyota Genuine Long
Life Coolant” or equivalent.
With ethylene− glycol type coolant for a
proper corrosion protection of aluminum
components
Do not use alcohol type antifreeze or
plain water alone.
Please contact your Toyota dealer for
further details.
BATTERY
Open voltage∗ at 20 C (68 F):
12.6—12.8 V Fully charged
12.2—12.4 V Half charged
11.8—12.0 V Discharged
∗: Voltage that is checked 20 minutes af- ter the key is removed with all the
lights turned off
Charging rates: 5 A max.
Page 324 of 345

’03 TUNDRA_U (L/O 0307)
315
2003 TUNDRA from Jul. ’03 Prod. (OM 34430U)
Recommended oil viscosity:
FrontSAE 75W −90
Rear Standard differential
Synthetic oil SAE 75W −140
Limited− slip differential
Above −18 C (0 F)
SAE 90
Below −18 C (0 F)
SAE 80W or 80W −90
CHASSIS LUBRICATION
Propeller shafts: Spiders and slide yokesLithium base chassis grease, NLGI
No.2
Double cardan joint Molybdenum −disulfide lithium base
chassis grease, NLGI No.2 BRAKES
Minimum pedal clearance when depressed
with the force of 490 N (50 kgf, 110 lbf)
with the engine running, mm (in.):
95 (3.7)
Pedal free play, mm (in.): 1—6 (0.04—0.24)
Pad wear limit, mm (in.): 1.0 (0.04)
Lining wear limit, mm (in.): 1.0 (0.04)
Parking brake adjustment:
Pedal type—when depressed with the
force of 294 N (30 kgf, 66.1 lbf)8—10 clicks
Lever type—when pulled with the force
of 196 N (20 kgf, 44 lbf) 8—12 clicks
Fluid type: SAE J1703 or FMVSS No.116 DOT 3
STEERING
Wheel free play: Less than 30 mm (1.2 in.)
Power steering fluid type: Automatic transmission fluid DEXRON II
or III