display TOYOTA TUNDRA 2008 2.G Navigation Manual

DESTINATION SEARCH
522008 TUNDRA Navigation from Oct.07 Prod.(OM34469U) SELECTING FROM THE LAST 5 CITIES
2U5094aG
Touch the touchscreen button of the de-
sired city name.
If the navigation has not be used, no cities will
be displayed on the screen.(b) Selecting from the categories
2U5097aG
Touch “Category”.
2U5021G
If the desired POI category is on the screen,
touch the name to display a detailed list of the
POI category.If the desired POI category is not on the
screen, touch “List All Categories” to list all
POI categories.
2U5022aG
When the desired category is touched, the
POI name list screen is displayed.

DESTINATION SEARCH
532008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
— Destination search by “POI
Category”
The destination can be set by selecting the
search point and the POI category.
1. Push the “DEST” button.
2. Touch “POI Category” on the “Destina-
tion” screen.
2U5023aG
Set the search point by the following
method:
1. Input the city center
2. Set the current position as the search
point
3. Set the search point via the map screen
4. Set the search point from any destination
It is possible to display the names of POIs lo-
cated within approximately 20 miles (32 km)
from the selected search point.INPUTTING THE CITY CENTER
1. Touch “Input City Center”.
2U5024G
2. Input the city center name.
2U5025aG
3. Touch the touchscreen button of the
desired city center name.
2U5026G
When an arrow facing the desired point is
touched, the map scrolls in that direction. Re-
leasing the finger from the arrow will stop the
scrolling
4. Touch “Enter”.
The search point is set and the “POI
Category” screen will be displayed.

DESTINATION SEARCH
542008 TUNDRA Navigation from Oct.07 Prod.(OM34469U) SETTING THE CURRENT POSITION AS
THE SEARCH POINT
Touch “Current Position”.
The search point is set at the current position,
and the “POI Category” screen will be dis-
played.SETTING THE SEARCH POINT VIA THE
MAP SCREEN
1. Touch “Map”.
2U5027G
When an arrow facing the desired point is
touched, the map scrolls in that direction. Re-
leasing the finger from the arrow will stop the
scrolling
2. Touch “Enter”.
The search point is set and the “POI
Category” screen will be displayed.SETTING THE SEARCH POINT FROM
DESTINATIONS
1. Touch the destination buttons at the
bottom of the screen.
2U5028G
When an arrow facing the desired point is
touched, the map scrolls in that direction. Re-
leasing the finger from the arrow will stop the
scrolling
2. Touch “Enter”.
The search point is set and the “POI
Category” screen will be displayed.

DESTINATION SEARCH
552008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
To search POIs near the search point
When the search point is set, the “POI
Category” screen will be displayed.
2U5029aG
Select the desired POI categories.
“List”: If the desired POI categories have al-
ready been selected, a list of POI will be dis-
played from among the selected categories.
The selected category icon appears on the
top left of the screen.
If the desired POI category is not on the
screen, touch “List All Categories” to list all
POI categories.
2U5030aG
Select the desired POI categories from the
list and touch “OK”.
The selected category icon appears on the
top left of the screen.
2U5095G
“Select Category”: To return to the POI
category selection screen.
“Show List”: To display the list of POIs in the
selected categories.

DESTINATION SEARCH
562008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
2U5031G
By touching the touch−screen button of the
desired item, the screen changes and dis-
plays the map location of the selected des-
tination and the route preference. (See
“Starting route guidance” on page 61.)
“On Route”: When the indicator is illumi-
nated by touching this touch−screen button,
the list of the items searched along the route
is displayed.
— Destination search by
“Emergency”
1. Push the “DEST” button.
2. Touching “Emergency” on the
“Destination” screen.
The display changes to a screen to select po-
lice stations, dealers, hospitals or fire sta-
tions. While driving, only nearby police sta-
tions, dealers, hospitals, or fire stations are
shown. The current position is shown with an
address, and the latitude and the longitude at
the top of the screen.
2U5033aG
3. Touch the desired emergency catego-
ry.
The selected emergency category list is dis-
played.
2U5034aG
4. Touch the touchscreen button of the
desired destination.
The screen changes and displays the map
location of the selected destination and the
route preference. (See
“Starting route
guidance” on page 61.)
INFORMATION
The navigation system does not guide in
areas where route guidance is unavail-
able. (See page 235.)

DESTINATION SEARCH
572008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
— Destination search by
“Memory”
1. Push the “DEST” button.
2. Touch “Memory” on the “Destination”
screen.
A list of registered memory points is dis-
played. (To register or edit memory points,
see “My places” on page 91.)
2U5035G
3. Touch the touchscreen button of your
desired memory point.
The screen changes and displays the map
location of the selected destination and the
route preference. (See “Starting route
guidance” on page 61.)
— Destination search by
“Previous”
1. Push the “DEST” button.
2. Touch “Previous”
on the “Destination”
screen.
2U5037G
The previous starting point and up to 100 pre-
viously set destinations are displayed on the
screen.
3. Touch the touchscreen button of the
desired destination.
The screen changes and displays the map
location of the selected destination and the
route preference. (See “Starting route
guidance” on page 61.)
INFORMATION
The list of previous destinations can be
deleted while the vehicle is stopped, if
these destinations are no longer neces-
sary. (See “ — Deleting previous points”
on page 103.)

DESTINATION SEARCH
582008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
— Destination search by
“Map”
1. Push the “DEST” button.
2. Touch “Map” on the “Destination”
screen.
2U5039aG
The screen changes and displays the map
location that was previously displayed just
before the destination input operation and the
route preference. (See “Starting route
guidance” on page 61.)
INFORMATION
Guidance starts if “Enter” is touched
even while driving. However, the cursor
cannot be moved.
— Destination search by
“Intersection”
1. Push the “DEST” button.
2. Touch “Intersection” on the
“Destination” screen.
2U5040G
3. Input the name of the two intersecting
streets which are located near the destina-
tion to be set.
2U5041G
4. Touch the touchscreen button of the
desired item.
After inputting the two intersecting streets,
the screen changes and displays the map
location of the selected destination and the
route preference. (See “Starting route
guidance” on page 61.)

DESTINATION SEARCH
602008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
2U5045aG
5. Touch the touchscreen button of the
desired entrance or exit name.
The screen changes and displays the map
location of the selected destination and the
route preference. (See
“Starting route
guidance” on page 61.)
“Input Name”: An applicable list is displayed
by touching this touch−screen button and in-
putting the name.
— Destination search by
“Coordinates”
1. Push the “DEST” button.
2. Touch “Coordinates” on the
“Destination” screen.
2U5046G
3. Input the latitude and the longitude.
4. When the input is finished, touch
“OK”.
By touching the touch−screen button of the
desired point, the screen changes and dis-
plays the map location of the selected des-
tination and the route preference. (See
“Starting route guidance” on page 61.)
— Destination search by
“Phone #”
1. Push the “DEST” button.
2. Touch “Phone #” on the “Destination”
screen.
2U5047G
3. Input a telephone number.
4. After inputting a telephone number,
touch “OK”.
The screen changes and displays the map
location of the selected destination and the
route preference. (See “Starting route
guidance” on page 61.)
If there is more than one site having the same
number, the following screen will be dis-
played.

DESTINATION SEARCH
612008 TUNDRA Navigation from Oct.07 Prod.(OM34469U)
2U5048G
INFORMATION
If there is no match for the telephone
number inputted, a list of identical
numbers with different area codes
will be displayed.
To set a memory point as a destina-
tion using the phone number, the
number must be registered previous-
ly. (See page 97.)
Starting route guidance
After inputting the destination, the screen
changes and displays the map location of the
selected destination and the route prefer-
ence.
2U5049aG
1. When an arrow facing the desired
point is touched, the map scrolls in that di-
rection.
Releasing the finger from the arrow will stop
the scrolling.2. Touch “Enter”.
The system starts route search and displays
recommended routes.
If there is already a set destination, “Add to
” and “Replace ” are displayed.
“Add to
”: To add a destination.
“Replace
”: To delete the existing destina-
tions and set a new one.
“Route Preference”: To change the route
preference. (See page 63.)
“Info.”: If this touch−screen button is dis-
played on the top of the screen, touch it to
view items such as name, address, and
phone number.

DESTINATION SEARCH
642008 TUNDRA Navigation from Oct.07 Prod.(OM34469U) “Short”: A route by which you can reach the
destination in the shortest distance.
This route is indicated by a green line.
“Info.”: To display the following information
about each of the 3 routes.
2U5096aG
1Time necessary for the entire trip
2Distance of the entire trip
3Toll road
4Freeway
5Ferry