TPMS reset TOYOTA TUNDRA 2021 Owners Manual (in English)
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2021, Model line: TUNDRA, Model: TOYOTA TUNDRA 2021Pages: 52, PDF Size: 3.8 MB
Page 4 of 52
2
Instrument panel
1 If equipped.2 For details, refer to the “Navigation and Multimedia System Owner’\
s Manual” or visit www.toyota.com/audio-multimedia for additional resources.
NOTE: Instrument panel features depend on the seat option, split seats o\
r bench.
Refer to the Owner’s Manual for more details.
OVERVIEW
Power tilt and telescopic steering
control switch1
Automatic High Beams (AHB) switch
Tire Pressure Monitoring (warning)
System (TPMS) reset switch
Power rear view mirror controls1
Personal/Interior lights main switch Headlight leveling dial
Ignition
switch
1
“POWER”
button1
Power back window switch1
Cargo lamp main switchTilt and telescopic steering lock release lever
1
(below the steering wheel)Hood lock release lever
Parking brake
Headlight/turn signal/
front fog light
1
control
Steering wheel controls
Audio control switches2
Telephone controls2
Voice command switch2Meter control switches
Dynamic Radar
Cruise Control (DRCC)
vehicle-to-vehicle
distance switch
Lane Departure Alert (LDA)
switch Dynamic Radar Cruise
Control (DRCC) switch
Multi-Information Display (MID) Meters
MY21_Tundra_QRG_V2_ML_0709.indd 27/13/20 10:54 AM
Page 5 of 52
3
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
1 If equipped.2 For details, refer to the “Navigation and Multimedia System Owner’s M\
anual” or visit
www.toyota.com/audio-multimedia for additional resources.
NOTE: Instrument panel features depend on the seat option, split seats or ben\
ch.
Refer to the Owner’s Manual for more details.
Automatic transmission shift lever1
Power tilt and telescopic steering
control switch1
Windshield wiper and washer control
Two and four-wheel drive selector
1
Audio/Navigation system2
USB port2
USB charging portsVSC OFF switch Intuitive parking assist switch
1
Power outlte-12V DC
Emergency flasher switch
Air conditioning/heating controls
1
Tire Pressure Monitoring (warning)
System (TPMS) reset switch Trailer brake controller
1
Automatic shift lever1
TOW/HAUL switch1Ignition
switch1
“POWER”
button1
Tilt and telescopic steering lock release lever1
(below the steering wheel)Meter control switches
Dynamic Radar
Cruise Control (DRCC)
vehicle-to-vehicle
distance switch
Lane Departure Alert (LDA)
switch Dynamic Radar Cruise
Control (DRCC) switch
Multi-Information Display (MID)
MY21_Tundra_QRG_V2_ML_0709.indd 37/13/20 10:54 AM
Page 43 of 52
41
The Automatic High Beams (AHB) safety system is designed to help you s\
ee
more clearly at night. At speeds above 25 mph, AHB can detect the headli\
ghts of
oncoming vehicles and taillights of preceding vehicles, then automatical\
ly toggles
between high and low beams accordingly.
See Toyota.com/safety-sense for more information.
Refer to the Toyota Owner’s Manual for a list of additional situation\
s in which the
system operation may be limited.
Automatic High Beams (AHB)
(1) Push the lever away from you with the headlight switch is in the “\
” or
“AUTO” position.
(2) Press the “
” switch.
The AHB indicator will come on when the headlights are turned on automat\
ically
to indicate that the system is active.
Note: Pull the lever back toward you or press the AHB switch to turn the AHB
system off.
The AHB indicator will turn off and “
” or “” will turn on. To activate the
system again, push the lever its original position or press the “
” switch.
When all of the following conditions are met, the high beams will be aut\
omatically
turned on (after approximately 1 second): • Vehicle speed is above approximately 21 mph (34 km/h).
• The area ahead of the vehicle is dark.
• There are no oncoming or preceding vehicles with headlights or tail\
lights turned on.
• There are few street lights on the road ahead.
If any of the following conditions occur, the high beams will be automat\
ically turned off: • Vehicle speed drops below approximately 17 mph (27 km/h).
• The area ahead of the vehicle is not dark.
• Oncoming or preceding vehicles have headlights or tail lights turne\
d on.
• There are many streetlights on the road ahead.
Seat belts
SAFETY & EMERGENCY FEATURES
baT
Keep as low on
hips as possible
Take up slack
Too high
System reset initialization
1. Push and hold “
SET” button until
the indicator blinks three times.
2. Wait several minutes to allow initialization to complete.
After adjusting tire pressures, or after tires have been rotated or repl\
aced, turn the
ignition switch to “ON” and press and hold the “
SET” button until indicator blinks
three times. Let the vehicle sit for a few minutes to allow initializati\
on to complete.
Refer to the load label on the door jamb or the Owner’s Manual for ti\
re inflation
specifications.
If the tire pressure indicator flashes for 1 minute and then remains on,\
take the
vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not been
initialized recently, setting the tire pressures to factory specificatio\
ns should
turn off the light.
Push up, or squeeze
lock release to lower Push up, or squeeze
lock release to lower
NOTE: If a passenger’s seat belt is fully extended, then retracted even slightly,
the Automatic locking retractor (ALR) will prevent it from being re-extended
beyond that point, unless fully retracted again. This feature is used to help
hold child restraint systems securely.
To find more information about seat belts, and how to install a child re\
straint
system, refer to the Owner’s Manual.
Seat belts-Shoulder belt anchor
Tire Pressure Monitoring (warning) System (TPMS)
Front seats
Rear seats (CrewMax models)
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
MY21_Tundra_QRG_V2_ML_0709.indd 417/13/20 10:54 AM