lights TOYOTA VENZA 2010 Accessories, Audio & Navigation (in English)

Page 8 TOYOTAREMOTE ENGINE STARTERTOYOTAREMOTE ENGINE STARTER Page 5
OPERATION
BEFORE STARTING THE ENGINE
The shift lever is in the “P” position.
(Without Push Start)
The key is not inserted in the key cylinder.
(With Push Start)
The engine can be remotely started regardless of
whether the driver has a smart key remote inside or
outside the vehicle.
All doors are closed.
The hood is closed.
OPERATION
REMOTE ENGINE STOP
METHOD 1: Press the UNLOCK button. The engine stops and the hazard lights flash twice.
LOCK
A) Press the
UNLOCK
button.
METHOD 2: Press and hold the LOCK button for two or more seconds. The engine stops
and the hazard lights flash once. UNLOCK
AUTOMATIC ENGINE SHUTDOWN
The engine will stop automatically after 10 minutes.
10
B) The
engine
stops.
C) The hazard
lights flash twice.
A) Press and
hold the LOCK
button for two
seconds or
more. B) The
engine
stops.
C) The hazard
lights flash
once.
There are two methods by which to shut off the vehicle engine remotely: Either press the
UNLOCK button once
ORpress and hold the LOCK button for two or more seconds.
Using Method 1, your vehicle will remain unlocked for 30 seconds. Then it automatically
relocks if no doors are opened. If your vehicle will not be in plain view for that time, or you
have other security concerns, you may wish to use Method 2 (below), which does not unlock
the vehicle.
NOTE: All doors will remain locked after the engine is shut off.
NOTE: For vehicles equipped with Piezo, the buzzer will chirp the same number of times that
the light flashes. Before using the Remote Engine Starter to start your vehicle, please be sure of the following
conditions.

Page 6 TOYOTAREMOTE ENGINE STARTERTOYOTAREMOTE ENGINE STARTER Page 7
OPERATION
REMOTE ENGINE START (vehicles without Smart Entry System)
STEP 1.Press and release the LOCK button twice within two seconds. The hazard lights
will flash each time.
LOCK
STEP 2. Press and hold the LOCK button for three seconds. The hazard lights flash once
when pressed, then again after three seconds. The engine starts, and the hazard
lights flash for 20 seconds.
OPERATION
REMOTE ENGINE START (vehicles with Smart Entry System)
LOCK
LOCK
NOTE: Any vehicle started with the Remote Engine Starter can idle for a total of 20
minutes.Automatic engine shutdown occurs after 10 minutes, but the vehicle may be remotely
started as many times as the user wishes and run for an additional 10 minutes. After 20 min-
utes of total operation, however, the vehicle must be started manually to reset the Remote
Engine Starter.
NOTE: For vehicles equipped with Piezo, the buzzer will chirp the same number of times that
the light flashes.
For any questions or concerns about the Remote Engine Starter, please call Toyota
Customer Experience at (800) 331-4331.
LOCK
A) Press and
release the
LOCK button. B) The hazard
lights flash
once. D) The hazard
lights flash again.
C) Press and
release the
LOCK button
again.
TWO SECONDS
THREE SECONDS
A) Press and
hold the
LOCK button
for three
seconds. B) The hazard
lights flash
once. D) The engine
starts and the
hazard lights
flash for 20
seconds.
C) After three
seconds, the
hazard lights
flash again.
FOLLOWED IMMEDIATELY BY:
NOTE: Your vehicle may be equipped with either remote pictured here.
NOTE: For vehicles equipped with Piezo, the buzzer will chirp the same number of times
that the light flashes.
20 SECONDS
To start a non-Smart Entry vehicle remotely, press and release the LOCK button twice within
two seconds, then press and hold the LOCK button for three seconds.
FOLLOWED IMMEDIATELY BY:
TWO SECONDS
A) Press and
release the
LOCK button.
B) The hazard
lights flash
once. D) The hazard
lights flash again.
C) Press and
release the
LOCK button
again.
D) The engine
starts and the
hazard lights
flash for 20
seconds.
20 SECONDS
STEP 1.
Press and release the LOCK button twice within two seconds. The hazard lights
will flash each time.
STEP 2. Press and hold the LOCK button for three seconds. The hazard lights flash once
when pressed, then again after three seconds. The engine then starts, and the
hazard lights flash for 20 seconds.
To start a Smart Entry vehicle remotely, press and release the LOCK button twice within two
seconds, then press and hold the LOCK button for three seconds.
THREE SECONDS
A) Press and
hold the
LOCK button
for three
seconds.B) The hazard
lights flash
once. C) After three
seconds, the
hazard lights
flash again.

Page 6 TOYOTAREMOTE ENGINE STARTERTOYOTAREMOTE ENGINE STARTER Page 7
OPERATION
REMOTE ENGINE START (vehicles without Smart Entry System)
STEP 1.Press and release the LOCK button twice within two seconds. The hazard lights
will flash each time.
LOCK
STEP 2. Press and hold the LOCK button for three seconds. The hazard lights flash once
when pressed, then again after three seconds. The engine starts, and the hazard
lights flash for 20 seconds.
OPERATION
REMOTE ENGINE START (vehicles with Smart Entry System)
LOCK
LOCK
NOTE: Any vehicle started with the Remote Engine Starter can idle for a total of 20
minutes.Automatic engine shutdown occurs after 10 minutes, but the vehicle may be remotely
started as many times as the user wishes and run for an additional 10 minutes. After 20 min-
utes of total operation, however, the vehicle must be started manually to reset the Remote
Engine Starter.
NOTE: For vehicles equipped with Piezo, the buzzer will chirp the same number of times that
the light flashes.
For any questions or concerns about the Remote Engine Starter, please call Toyota
Customer Experience at (800) 331-4331.
LOCK
A) Press and
release the
LOCK button. B) The hazard
lights flash
once. D) The hazard
lights flash again.
C) Press and
release the
LOCK button
again.
TWO SECONDS
THREE SECONDS
A) Press and
hold the
LOCK button
for three
seconds. B) The hazard
lights flash
once. D) The engine
starts and the
hazard lights
flash for 20
seconds.
C) After three
seconds, the
hazard lights
flash again.
FOLLOWED IMMEDIATELY BY:
NOTE: Your vehicle may be equipped with either remote pictured here.
NOTE: For vehicles equipped with Piezo, the buzzer will chirp the same number of times
that the light flashes. 20 SECONDS
To start a non-Smart Entry vehicle remotely, press and release the LOCK button twice within
two seconds, then press and hold the LOCK button for three seconds.
FOLLOWED IMMEDIATELY BY:
TWO SECONDS
A) Press and
release the
LOCK button.
B) The hazard
lights flash
once. D) The hazard
lights flash again.
C) Press and
release the
LOCK button
again.
D) The engine
starts and the
hazard lights
flash for 20
seconds.
20 SECONDS
STEP 1.
Press and release the LOCK button twice within two seconds. The hazard lights
will flash each time.
STEP 2. Press and hold the LOCK button for three seconds. The hazard lights flash once
when pressed, then again after three seconds. The engine then starts, and the
hazard lights flash for 20 seconds.
To start a Smart Entry vehicle remotely, press and release the LOCK button twice within two
seconds, then press and hold the LOCK button for three seconds.THREE SECONDS
A) Press and
hold the
LOCK button
for three
seconds.
B) The hazard
lights flash
once. C) After three
seconds, the
hazard lights
flash again.

Page 8 TOYOTAREMOTE ENGINE STARTERTOYOTAREMOTE ENGINE STARTER Page 5
OPERATION
BEFORE STARTING THE ENGINE
The shift lever is in the “P” position.
(Without Push Start)
The key is not inserted in the key cylinder.
(With Push Start)
The engine can be remotely started regardless of
whether the driver has a smart key remote inside or
outside the vehicle.All doors are closed.
The hood is closed.
OPERATION
REMOTE ENGINE STOP
METHOD 1: Press the UNLOCK button. The engine stops and the hazard lights flash twice.
LOCK
A) Press the
UNLOCK
button.
METHOD 2:Press and hold the LOCK button for two or more seconds. The engine stops
and the hazard lights flash once. UNLOCK
AUTOMATIC ENGINE SHUTDOWN
The engine will stop automatically after 10 minutes.
10
B) The
engine
stops.
C) The hazard
lights flash twice.
A) Press and
hold the LOCK
button for two
seconds or
more. B) The
engine
stops.
C) The hazard
lights flash
once.
There are two methods by which to shut off the vehicle engine remotely: Either press the
UNLOCK button once
ORpress and hold the LOCK button for two or more seconds.
Using Method 1, your vehicle will remain unlocked for 30 seconds. Then it automatically
relocks if no doors are opened. If your vehicle will not be in plain view for that time, or you
have other security concerns, you may wish to use Method 2 (below), which does not unlock
the vehicle.
NOTE: All doors will remain locked after the engine is shut off.
NOTE: For vehicles equipped with Piezo, the buzzer will chirp the same number of times that
the light flashes. Before using the Remote Engine Starter to start your vehicle, please be sure of the following
conditions.