lights TOYOTA VENZA 2010 Accessories, Audio & Navigation (in English)

TOYOTA — Remote Engine Starter Page 5
OPERATION
REMOTE ENGINE START
To start a vehicle remotely, press and release the LOCK button twice within two
seconds, then press and hold the LOCK button for three seconds.
FOLLOWED IMMEDIATELY BY:
TWO SECONDS
A)
Press and
release
the LOCK
button. B)
The hazard
lights flash
once. D)
The hazard
lights flash
again.
C)
Press and
release the
LOCK button
again.
D) The engine
starts and the
hazard lights
flash for 20
seconds.
20 SECONDS
STEP
1.
Press and release the LOCK button on the remote twice within two seconds.
The hazard lights will flash each time.
STEP 2. Press and hold the LOCK button on the remote for three seconds. The hazard
lights flash once when pressed, then again after three seconds. The engine starts,
and the hazard lights flash for 20 seconds.THREE SECONDS
A) Press and
hold the
LOCK
button for
three
seconds. B)
The hazard
lights flash
once. C)
After three
seconds,
the hazard
lights flash
again.
UNLOCKUNLOCK
UNLOCK
NOTE: Any vehicle started with the Remote Engine Starter can idle for a total \
of 20
minutes. Automatic engine shutdown occurs after 10 minutes, but the vehicle may
be remotely started as many times as the user wishes and run for an addi\
tional 10
minutes. After 20 minutes of total operation, however, the vehicle must be started
manually to reset the Remote Engine Starter.
NOTE: For vehicles equipped with Piezo, the buzzer will chirp the same number\
of
times that the light flashes.
For any questions or concerns about the Remote Engine Starter, please call Toyota
Customer Experience at (800) 331-4331.

Page 6 TOYOTA — Remote Engine Starter
OPERATION
REMOTE ENGINE STOP
There are two methods by which to shut off the vehicle engine remotely: Either press
the UNLOCK button once OR press and hold the LOCK button for two or more seconds.












Using Method 1, your vehicle will remain unlocked for 30 seconds. Then it automatically
re-locks if no doors are opened. If your vehicle will not be in plain vi\
ew for that time, or
you have other security concerns, you may wish to use Method 2 (below)\
, which does not
unlock the vehicle.











NOTE: All doors will remain locked after the engine is shut off.
NOTE: For vehicles equipped with Piezo, the buzzer will chirp the same number\
of
times that the light flashes.



AUTOMATIC ENGINE SHUTDOWN
The engine will stop automatically after 10 minutes.
10
METHOD 2: Press and hold the LOCK button on the remote for two or more seconds. The
engine stops and the hazard lights flash once.
A) Press and
hold the
LOCK button
for two
seconds or
more. B) The
engine
stops.
C) The hazard
lights flash
once.
UNLOCK
METHOD 1: Press the UNLOCK button on the remote. The engine stops and the hazard
lights flash twice.
A) Press the
UNLOCK
button. B) The
engine
stops.
C) The hazard
lights flash twice.
UNLOCK