CD player TOYOTA xD 2013 Accessories, Audio & Navigation (in English)
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2013, Model line: xD, Model: TOYOTA xD 2013Pages: 76, PDF Size: 4.01 MB
Page 54 of 76

5
[Advanced
Sound
Retriever]The Sound Retriever
function provides a
wide, deep and rich
quality to CD/MP3/
WMA /USB/iPod
sound, which gives
the user a lively
impression.
Establish the Sound
Retriever mode by
touching either [Low
Rate] or [High Rate].
Touch [Off] to
deactivate the Sound
Retriever.NOTICE
The Sound Retriever function
can only be selected when
playing MP3/ WMA from CD
and iPod, USB portable audio
player/USB memory.
The Sound Retriever function
does not support external
compressed audio media.
BASS function and TREBLE
function values can be set for
each of the modes (AM, FM,
CD/MP3/ WMA, iPod/ USB
portable audio player/ USB
memory, XM Satellite Radio).
When you switch modes, the
settings change to the BASS
and TREBLE values set for the
selected mode.
The ASL function is only
ef fective when the vehicle is
moving.
•
•
•
•
Setting Up the Subwoofer
Touch [Sub -W] on the Sound
Settings menu to display the
Subwoofer Settings Menu and then
touch on the settings that follow to
set them up.
( This will only display when the sub -
woofer settings have been activated.
You can set this item, when the
[Subwoofer Setting] is set to [ON].
(page 52)) After the end of setup,
touch [OK] to return to the previous
screen.
[Phase] Establish the
Subwoofer Output
Phase mode by
touching either
[NORMAL] or
[REVERSE].
[Level
Adjustment] Each time you touch
[+], the subwoofer
level steps increase
up to a maximum level
of 6.
Each time you touch
[–], the subwoofer
level steps decrease
down to a minimum
level of -24.
•
Page 55 of 76
![TOYOTA xD 2013 Accessories, Audio & Navigation (in English) 55
<CRB3839-A/S>55
Establishing the SSP (Scion
Sound Processing) Mode
SSP is a modified DSP (Digital Signal
Processing) system that provides a
customized sound for your vehicle.
Touch [SSP] on the TOYOTA xD 2013 Accessories, Audio & Navigation (in English) 55
<CRB3839-A/S>55
Establishing the SSP (Scion
Sound Processing) Mode
SSP is a modified DSP (Digital Signal
Processing) system that provides a
customized sound for your vehicle.
Touch [SSP] on the](/img/14/43459/w960_43459-54.png)
55
Establishing the SSP (Scion
Sound Processing) Mode
SSP is a modified DSP (Digital Signal
Processing) system that provides a
customized sound for your vehicle.
Touch [SSP] on the Sound Settings
menu to display the SSP Settings
Menu. Touch [SSP Settings] and
touch one of the following to estab -
lish the SSP mode.
[SSP
Natural]Natural and smooth
sound that gives no
listening fatigue but
comfort.
[SSP Hear] A powerful, energetic, live sound.
[SSP Feel] Reproduces the sound on the stage that
musicians hear.
For more details, please visit the
SCION website at
http://www.scion.com/.
•Connecting a
Bluetooth Cell Phone
You can connect a Bluetooth
enabled cell phone to the system
and enjoy hands-free phoning.
You can also use your cell phone
for regular calls with the Bluetooth
connection.
WARNING
Before connecting the cell
phone, always stop your car in a
safe location.
NOTICE
A Bluetooth enabled cell
phone that supports the HFP
profile is required for the
operations explained here.
Make sure and verif y that the
battery is suf ficiently charged
before connecting the cell
phone.
Even when using a cell phone
that has been connected as a
Bluetooth audio player, you will
need to carry out the following
connection procedures for
hands-free phoning.
•
•
•
Page 56 of 76

56
For the most part, you will be using
your Bluetooth cell phone to register
the cell phone to the system. For
more information, see the instruction
manual for your cell phone.
1. To
uch [
] d [Bluetooth] d
[Connect Phone] d [Add new].
Phone 01
Phone 02
You can connect up to five
Bluetooth enabled cell phones
and Bluetooth audio players to the
system. If five or more devices
have already been connected, you
will need to cancel some of these
connections. You can accomplish
this by touching on the device(s)
that you want to cancel.
2 . U s
ing your cell phone, search for
a Bluetooth enable device that can
be connected, and then select the
system. 3
. Fo
rward the passcode that
appears on the screen from your
cell phone.
If the p
asscode has been sent
properly, the cell phone will be
connected to the system.
Sending your pass key for registration
1. To
uch [] d [Bluetooth] d
[Connect Phone] d [Add New].
If a device has already been
connected, a screen will appear
seeking confirmation of whether
this connection is to be canceled
or not. Touch [YES].
2 . U s
ing the Bluetooth cell phone,
search for the Bluetooth enabled
device and then select this unit
([CAR MULTIMEDIA]).
3. Se
nd the Passkey that appears on
the screen from the Bluetooth cell
phone to the system.
If th e P
asskey has been sent
correctly, Bluetooth cell phone will
register it to the system and it will
be connected.
Registering via SSP (Secure
Simple Pairing)
1. To
uch [] d [Bluetooth] d
[Connect Phone] d [Add New].
If a device has already been
connected, a screen will appear
seeking confirmation of whether
this connection is to be canceled
or not. Touch [YES]. 2
. U s
ing the Bluetooth cell phone,
search for the Bluetooth enabled
device and then select this unit
([CAR MULTIMEDIA]).
• For some types of devices and
authentication methods, number
authentication or other means of
verification may be required.
• Blu
etooth 2.0 or higher is required.
Page 64 of 76

6
• The folder selection sequence for playback
and other operations becomes the writing
sequence used by the writing software.
For this reason, the expected sequence at
the time of playback may not coincide with
the actual playback sequence. However,
there also is some writing software which
permits setting of the playback order.
IMPORTANT
When naming an MP3/ WMA
file, add the corresponding
filename extension (.mp3,
.wma).
This unit plays back files
with the filename extension
(.mp3, .wma) as an MP3/ WMA
file. To prevent noise and
malfunctions, do not use these
extensions for files other than
MP3/ WMA files.
•
•
MP3 additional
information
•
Files are compatible with the ID3 Tag Ver.
1.0, 1.1, 2.2, 2.3 and 2.4 formats for display
of album (disc title), track (track title), artist
(track artist) and comments. Ver. 2.x of ID3
Tag is given priority when both Ver. 1.x and
Ver. 2.x exist.
• The
emphasis function is valid only when
MP3 files of 32 kHz, 44.1 kHz and 48 kHz
frequencies are played back. (16 kHz,
22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz,
48 kHz sampling frequencies can be played
back.)
• There is no m3u playlist compatibilit
y.
• There is no compatibility with the MP3i
(MP3 interactive) or mp3 PRO formats.
• The sound quality of MP3 files generally
becomes bet
ter with an increased bit
rates. This unit can play recordings with
bit rates from 8 kbps to 320 kbps, but
in order to be able to enjoy sound of a
cert
ain quality, we recommend using only
discs recorded with a bit rate of at least
128 kbps.
MP3 and WMA files
• MP3 is short for MPEG Audio Layer 3 and
refers to an audio compression technology
standard.
• WMA is short for Windows Media™
Audio and refers to an audio compression
technology that is developed by Microsoft
Corporation. WMA data can be encoded by
using Windows Media Player.
• With some applications used to encode
WMA files, this unit may not operate cor-
rectly.
• With some applications used to encode
WMA files, album names and other text
information may not be correctly displayed.
• This unit allows playback of MP3/WMA files
on CD-ROM, CD-R, CD-RW discs and USB
portable audio player/USB memory. Disc
recordings compatible with level 1 and level
2 of ISO9660 and with the Romeo and Joliet
file system can be played back.
• MP3/WMA files are not compatible with
packet write data transfer.
• The maximum number of characters which
can be displayed for a file name, including
the extension (.mp3, .wma), is 32, from
the first character.
• The maximum number of characters whic
h
can be displayed for a folder name is 32.
• In case of files recorded according to the
Romeo file system, only the first 32 c
har-
acters can be displayed.
Page 65 of 76

65
WMA additional
information
• This unit plays back WMA files encoded by
Windows Media Player.
• You can only playbac
k WMA files in the
frequencies 32 kHz, 44.1 kHz and 48 kHz.
• The sound quality of
WMA files generally
becomes better with an increased bit rate.
This unit can play recordings with bit rates
from 48 kbps to 320 kbps (CBR) or from
48 kbps to 384 kbps (VBR), but in order to
be able to enjoy sound of a certain quality,
we recommend using discs recorded with
a higher bit rate.
• This unit doesn't support the follo
wing for-
mats.
- Wind
ows Media Audio 9 Professional
(5.1ch)
- Windows Media
Audio 9 Lossless
- Windows Media Audio 9 Voice
About folders and
MP3/WMA files
• An outline of a CD-ROM and USB portable
audio player/USB memory with MP3/WMA
files on it is shown below. Subfolders are
shown as folders in the folder currently
selected.
001.mp3
(001.wma)
010.mp3
(010.wma)
021.mp3
(021.wma)
030.mp3
(030.wma)
011.mp3
(011.wma)
020.mp3
(020.wma)
First
levelSecond levelThirdlevel
001
(ROOT)
002
004
005
003
NOTES
This unit assigns folder
number. The user can not
assign folder numbers.
MP3/ WMA files in the USB
portable audio player/USB
memory are played in the
same order as they were
copied to the USB portable
audio player/USB memory.
To specify the order in
which files in the USB
portable audio player/USB
memory are played, we
recommend the following
method.
1 Using a personal computer,
add a number indicating
the playback order in
front of the file name, e.g.
[001xxx.mp3] or [099yyy.wma].
Put the files into a folder.
3 Copy the folder to the USB
portable audio player/USB
memory.
Depending on the
computer environment,
it may not be possible to
specif y the order by this
method.
•
•
•
Page 66 of 76

66
USB portable audio
player/ USB memory
compatibility
• USB version: 2.0, 1.1 and 1.0
• USB data transfer rate: High speed
•
USB Class: MSC (Mass Storage Class) device• Protocol: Bulk
• Minimum amount of memory: 256 MB
• Maximum amount of memory: 250 GB
• File system: FAT32 and FAT16
• Supply current: 1 A
NOTES
Partitioned USB memory
is not compatible with this
unit.
Depending on the kind of
USB portable audio player/
USB memory you use, this
unit may not recognize
the USB audio player/USB
memory or audio files
may not be played back
properly.
•
•
This unit can playback
files in the USB portable
audio player/USB memory
that is USB Mass Storage
Class. However, copyright
protected files that are
stored in above-mentioned
USB devices cannot be
played back. (If the iPod is
connected to this unit, file
playback condition depends
on the iPod specifications.)
You cannot connect a USB
portable audio player/USB
memory to this unit via a
USB hub.
Not all multimedia portable
devices are compatible.
We cannot guarantee
compatibility with all USB
mass storage devices and
assumes no responsibility
for any loss of data on media
players, smart phones, or
other devices while using this
product.
•
•
•
•
It is not possible to check
folders that do not include
MP3/ WMA files. (These
folders will be skipped
without displaying the
folder number.)
MP3/ WMA files in up to
eight tiers of folders can
be played back. However,
there is a delay in the
start of playback on discs
and USB portable audio
player/USB memory with
numerous tiers. For this
reason we recommend
creating discs with no more
than two tiers.
It is possible to playback up
to 19
f
olders on one disc.
It is possible to playback up
to 55 f
olders on one USB
portable audio player/USB
memory.
•
•
•
•
Page 67 of 76

67
Terms
Packet writeThis is a general term for a method
of writing on CD -R, etc. at the time
required for a file, just as is done
with files on floppy or hard discs.
Bit rateThis expresses data volume per
second, or bps (bits per second)
units. The higher the rate, the more
information is available to reproduce
the sound. Using the same encoding
method (such as MP3), the higher
the rate, the better the sound.
Multi-sessionMulti-session is a recording method
that allows additional data to be
recorded later. When recording
data on a CD -ROM, CD -R or CD -
RW, etc., all data from beginning
to end is treated as a single unit or
session. Multi-session is a method
of recording more than 2 sessions in
one disc.
CD-DACD - DA is an abbreviation of
Compact Disc Digital Audio. It refers
to the uncompressed format of
regular CDs.
ID3 TagThis is a method of embedding track-
related information in a MP3 file. This
embedded information can include
the track title, the artist's name, the
album title, the music genre, the
year of production, comments and
other data. The contents can be
freely edited using software with ID3
Tag editing functions. Although the
tags are restricted to the number of
characters, the information can be
viewed when the track is played back.
ISO9660 formatThis is the international standard
for the format logic of CD -ROM
folders and files. For the ISO9660
format, there are regulations for the
following two levels.
Level 1:
The file name is in 8.3 format (the
name consists of up to 8 characters,
half-byte English capital letters
and half-byte numerals and the "_"
sign, with a file- extension of three
characters).
Level 2:
The file name can have up to 31
characters (including the separation
mark "." and a file extension).
Each folder contains less than 8
hierarchies.
Extended formats
Joliet:
File names can have up to 64
characters.Romeo:
File names can have up to 128
charac
ters.
m3uPlaylists created using the
" WINAMP " software have a playlist
file extension (.m3u).
MP3MP3 is short for MPEG1 & 2 Audio
Layer3. It is an audio compression
standard set by a working group
(MPEG) of the ISO (International
Standards Organization). MP3 is able
to compress audio data to about 1/10
the level of a conventional disc.
WMAWMA is short for Windows MediaTM
Audio and refers to an audio
compression technology that is
developed by Microsoft Corporation.
WMA data can be encoded by using
Windows Media Player version 7 or
later.
Page 68 of 76

68
• If the heater is used in cold weather,
moisture may form on components
inside the CD player. Condensation
may cause the CD player to malfunc-
tion. If you think that condensation is
a problem, turn off the CD player for
an hour or so to allow it to dry out and
wipe any damp discs with a soft cloth
to remove the moisture.
• Roa
d shocks may interrupt CD play-
back.
• Nev
er put a label, tape or scratches on
a disc. These will prevent the disc from
being played.
• When using discs that can be printed
on label surfaces, check the instruc -
tions and the warnings of the discs.
Depe
nding on the discs, inserting and
ejecting may not be possible. Using
such discs may result in damage to
this equipment.
Do not a
ttach commercially available
labels or other materials to the discs.
- The d
iscs may warp making the disc
unplayable.
- The l
abels may come off during
playback and prevent ejection of the
discs, which may result in damage to
the equipment.
CD-R and CD-RW
discs
• When CD - R/CD - RW discs are used,
playback is possible only for discs
which have been finalized.
• It ma
y not be possible to playback
CD - R/CD - RW discs recorded on a
music CD recorder or a personal com-
puter because of disc characteristics,
scratches or dirt on the disc, or dirt,
condensation, etc., on the lens of this
unit.
• Pla
yback of discs recorded on a per-
sonal computer may not be possible,
depending on the application settings
and the environment. Please record
with the correct format. (For details,
contact the manufacturer of the appli-
cation.)
CD player and care
• Use only CDs that have either of the
two Compact Disc Digital Audio marks
as shown below.
• Use o
nly normal, round CDs. If you
insert irregular, non-round, shaped
CDs they may jam in the CD player or
not play properly.
• Check all CDs for cracks, scratches
or warping before playing. CDs that
have cracks, scratches or are warped
may not play properly. Do not use such
discs.
• Avoi
d touching the recorded (non-print-
ed) surface when handling the disc.
• Sto
re discs in their cases when not in
use.
• Keep d
iscs out of direct sunlight and
do not expose the discs to high tem-
peratures.
• Do no
t attach labels, write on or apply
chemicals to the surface of the discs.
• To cl
ean a CD, wipe the disc with a
soft cloth outward from the center.
Page 71 of 76

71
Error indications
If the CD player does not work, the CD stops suddenly during playback, or a similar problem occurs, an error
indication will appear on the display. The cause of the trouble will be indicated by an error number, and you
should check the corresponding item shown in the table below.
Check DISCWhen the disc is dirty or has been inserted upside-down.
Check the disc.
DISC ErrorThere is probably an electrical or mechanical fault in the CD player.
Contact your Scion dealer and ask for repair.
No music files found.
This appears when an MP3/WMA file format is unusual and not supported by this unit
like WAV format recordings.
Please check the MP3/WMA file format.
Page 73 of 76

73
When problems occur with the USB portable audio player/USB memory is connected to this unit, a message
will appear on the display. Refer to the table below to identif y the problem, then take the suggested corrective
action.
No compatible audio files
found.
Please add compatible files to
your USB device.This appears when an MP3/WMA file format is unusual and not supported by this unit
like WAV format recordings.
Please check the MP3/WMA file format.
Connection error.
Please consult your Owner’s
Manual for
instructions on how to connect
the USB device.Communication failure. Or, the overcurrent was detected.
Disconnect the USB portable audio player/USB memory and connect again.
When problems occur with the Bluetooth audio player is connected to this unit, a message will appear on the
display. Refer to the table below to identif y the problem, then take the suggested corrective action.
Audio player battery level is
low.The battery power of the Bluetooth audio player connected with this unit is a little.
Music tracks not supported.
Please check your audio player.This appears when an MP3/WMA file format is unusual and not supported by this unit
like WAV format recordings.
Please check the MP3/WMA file format.