engine TOYOTA YARIS HATCHBACK 2017 User Guide

671-2. Theft deterrent system
1
For safety and security
YARIS_HB_OM_USA_OM52G64U
Engine immobilizer system
The system begins operating after the key has been removed from
the engine switch. The system is canceled after the registered key
has been inserted into the engine switch.
■System maintenance
The vehicle has a maintenance-free type engine immobilizer system.
■ Conditions that may cause the system to malfunction
●If the grip portion of the key is in contact with a metallic object
● If the key is in close proximity to or touching a key to the security system
(key with a built-in transponder chip) of another vehicle
: If equipped
The vehicle’s keys have built-in transponder chips that prevent
the engine from starting if a key has not been previously regis-
tered in the vehicle’s on-board computer.
Never leave the keys inside the vehicle when you leave the vehi-
cle.
This system is designed to help prevent vehicle theft but does
not guarantee absolute security against all vehicle thefts.
YARIS_HB_OM_USA_OM52G64U.book 67 ページ ２０１６年２月１６日　火曜日　午後３時２０分

681-2. Theft deterrent system
YARIS_HB_OM_USA_OM52G64U■
Certifications for the engine immobilizer system
U.S.A.
FCC ID: PSIRI-43BTY
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC WARNING:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Canada
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, includ-
ing interference that may cause undesired operation of the device.
NOTICE
■ To ensure the system operates correctly
Do not modify or remove the system. If modified or removed, the proper
operation of the system cannot be guaranteed.
YARIS_HB_OM_USA_OM52G64U.book 68 ページ ２０１６年２月１６日　火曜日　午後３時２０分

732. Instrument cluster
2
Instrument cluster
YARIS_HB_OM_USA_OM52G64U
Warning lights inform the driver of malfunctions in the indicated vehi-
cle’s systems.
Warning lights
*1
(Except Canada)
Brake system warning
light (P. 302)
*1Electric power steering
system warning light
(P. 303)
*1
(Canada)
Brake system warning
light ( P. 302)
*1, 2, 5
PCS warning light
(P. 303)
*1Charging system warn-
ing light ( P. 302)*1, 3Slip indicator
(P. 304)
*1
Low engine oil pressure
warning light ( P. 302)
*2
(Yellow)
Automatic High Beam
indicator (P. 304)
*1
(Red)
High engine coolant
temperature warning
light (P. 302)*2
(Yellow)
Cruise control indicator
(P. 304)
*1
(Except Canada)
Malfunction indicator
lamp ( P. 302)
*2
(Yellow)
LDA indicator
(P. 304)
*1
(Canada)
Malfunction indicator
lamp ( P. 302)
*2, 4
(Yellow)
Lane marker indicators
(P. 304)
*1SRS warning light
(P. 303)Open door warning light
( P. 304)
*1
(Except Canada)
ABS warning light
(P. 303)Low fuel level warning
light ( P. 304)
*1
(Canada)
ABS warning light
(P. 303)Driver’s and front pas-
senger’s seat belt
reminder light ( P. 304)
YARIS_HB_OM_USA_OM52G64U.book 73 ページ ２０１６年２月１６日　火曜日　午後３時２０分

742. Instrument cluster
YARIS_HB_OM_USA_OM52G64U
*1: These lights turn on when the engine switch is turned to the “ON” positionto indicate that a system check is being performed. They will turn off after
the engine is started, or after a few seconds. There may be a malfunction
in a system if a light does not come on, or if the lights do not turn off. Have
the vehicle inspected by your Toyota dealer.
*2: If equipped
*3: The light flashes to indicate that the system is operating and come on toindicate a malfunction.
*4: The lights turn on with LDA indicator to indicate a malfunction.
*5: The light flashes to indicate a malfunction.
The indicators inform the driver of the operating state of the vehicle’s
various systems.
*1
(Except Canada)
Tire pressure warning
light ( P. 305)
*1
(Except Canada)
Maintenance required
reminder light ( P. 306)
*1
(If equipped)
Low windshield washer
fluid warning light
(P. 305)
Indicators
Turn signal indicator
(P. 143)*1, 4Eco Driving Indicator
Light ( P. 120)
Headlight high beam
indicator (P. 147)
*2
(Green)
Cruise control indicator
( P. 188)
*2
(Green)
Automatic High Beam
indicator (P. 183)
*2
“SET” indicator
(P. 188)
*2
Front fog light indicator
(P. 148)
*2
(Green)
LDA indicator
( P. 178)
*3
(Blue)
Low engine coolant tem-
perature indicator
*2, 9
(Green)
Lane marker indicators
(P. 179)
YARIS_HB_OM_USA_OM52G64U.book 74 ページ ２０１６年２月１６日　火曜日　午後３時２０分

752. Instrument cluster
2
Instrument cluster
YARIS_HB_OM_USA_OM52G64U
*1: These lights turn on when the engine switch is turned to the “ON” positionto indicate that a system check is being performed. They will turn off after
the engine is started, or after a few seconds. There may be a malfunction
in a system if a light does not come on, or if the lights do not turn off. Have
the vehicle inspected by your Toyota dealer.
*2: If equipped
*3: The light turns on to indicate the engine coolant temperature is low.
*4: Vehicles with an automatic transmission
*5: The light flashes to indicate that the system is operating.
*6: This light illuminates on the center panel.
*7: The light comes on when the system is turned off.
*8: The light comes on when system settings are changed.
*9: The light flashes in yellow to indicate that the vehicle is deviating from thelane.
*1, 5
Slip indicator ( P. 193)
*1, 2, 7PCS warning light
(P. 168)
*1“TRAC OFF” indicator
(P. 193)*1, 6“AIR BAG ON” indicator
( P. 46)
*1VSC OFF indicator
(P. 194)*1, 6“AIR BAG OFF” indicator
( P. 46)
*2, 5, 8PCS activation indicator
(P. 165)
YARIS_HB_OM_USA_OM52G64U.book 75 ページ ２０１６年２月１６日　火曜日　午後３時２０分

762. Instrument cluster
YARIS_HB_OM_USA_OM52G64U
WARNING
■If a safety system warning light does not come on
Should a safety system light such as the ABS and SRS warning light not
come on when you start the engine, this could mean that these systems are
not available to help protect you in an accident, which could result in death
or serious injury. Have the vehicle inspected by your Toyota dealer immedi-
ately if this occurs.
NOTICE
■To prevent damage to the engine and its components
The engine may be overheating if the high engine coolant temperature
warning light flashes or turns on. In this case, immediately stop the vehicle
in a safe place, and check the engine after it has cooled completely.
(P. 330)
YARIS_HB_OM_USA_OM52G64U.book 76 ページ ２０１６年２月１６日　火曜日　午後３時２０分

772. Instrument cluster
2
Instrument cluster
YARIS_HB_OM_USA_OM52G64U
Gauges and meters
Tachometer (if equipped)
Displays the engine speed in revolutions per minute.
Speedometer
Displays the vehicle speed.
Fuel gauge (if equipped)
Displays the quantity of fuel remaining in the tank.
Display change button
P. 8 0
Multi-information display
Presents the driver with a variety of driving-related data. (P. 79)
Clock adjusting buttons
P. 8 1
1
2
3
4
5
6
YARIS_HB_OM_USA_OM52G64U.book 77 ページ ２０１６年２月１６日　火曜日　午後３時２０分

782. Instrument cluster
YARIS_HB_OM_USA_OM52G64U
The brightness of the instrument panel lights can be adjusted.Brighter
Darker
■The meters and display illuminate when
The engine switch is in the “ON” position.
Instrument panel light control
1
2
NOTICE
■To prevent damage to the engine and its components
On vehicles with a tachometer, do not let the indicator needle of the tachom-
eter enter the red zone, which indicates the maximum engine speed.
YARIS_HB_OM_USA_OM52G64U.book 78 ページ ２０１６年２月１６日　火曜日　午後３時２０分

802. Instrument cluster
YARIS_HB_OM_USA_OM52G64U.
Items displayed can be switched
by pressing the display change
button.
■Odometer
Displays the total distance the vehicle has been driven.
■Trip m ete rs
Displays the distance the vehicle has been driven since the meter
was last reset. Trip meters “A” and “B” can be used to record and
display different distances independently.
Pressing and holding the display change button while the trip meter is
displayed will reset the trip meter to “0”.
■
Driving range
Displays the estimated maximum distance that can be driven with
the quantity of fuel remaining.
• This distance is computed based on your average fuel consumption. As a result, the actual distance that c an be driven may differ from that dis-
played.
• When only a small amount of fuel is added to the tank, the display may not be updated.
When refueling, turn the engine switch to the “LOCK” position. If the vehi-
cle is refueled without turning the engine switch to the “LOCK” position, the
display may not be updated.
Changing the display
Drive information
YARIS_HB_OM_USA_OM52G64U.book 80 ページ ２０１６年２月１６日　火曜日　午後３時２０分

812. Instrument cluster
2
Instrument cluster
YARIS_HB_OM_USA_OM52G64U■
Average fuel consumption
Displays the average fuel consumption since the function was
reset.
• The function can be reset by pressing and holding the display change
button when the average fuel consumption is displayed.
• Use the displayed average fuel consumption as a reference.
■
Instantaneous fuel consumption
Displays the instantaneous of fuel consumption.
■Average vehicle speed
Displays the average vehicle speed since the engine was last
started.
Eco Driving Indicator Light can be activated or deactivated by press-
ing the display change button when the Eco Driving Indicator Light
customization display is displayed.
To change the Eco Driving Indicator Light customization display, display the
odometer and press and hold the display change button until the display
changes.
After customization, press the display change button for more than 2 sec-
onds to return to the odometer.
The clock can be adjusted by pressing the buttons. Adjust the hours
Adjust the minutes
Eco Driving Indicator Light customization (Vehicles with an auto-
matic transmission)
Clock
1
2
YARIS_HB_OM_USA_OM52G64U.book 81 ページ ２０１６年２月１６日　火曜日　午後３時２０分