bulb VAUXHALL ADAM 2016.5 User Guide

Vehicle care1734. Turn bulb holder anticlockwiseand remove. Replace bulb by
withdrawing:
turn signal light 1
tail light 2
tail light / brake light 3
If tail light 2 and tail light/brake
light 3 are LEDs, seek the
assistance of a workshop for
replacement.
5. Insert and turn bulb holder clockwise into the tail light
assembly. Ensure the wires
remain in the cable ducts.
Fit light assembly with the
retaining pins into the recesses of
the vehicle body and tighten the
plastic securing nut from inside
the load compartment. Pull the
circular gasket over the recess in
the lamp housing.
Close cover and engage.
Reversing light/rear fog light
Reversing light is located on the left
side of the bumper, and the rear fog
light is located on the right side of the bumper.
The description of bulb replacement
is the same for both lights.
1. Undo screw and remove cover.
2. Undo screw and remove light assembly from the bumper.
3. Disengage and remove the bulbsocket by turning anticlockwise.

174Vehicle care
4. Remove bulb by turninganticlockwise slightly and
withdrawing. Replace the bulb.
5. Insert the bulb socket into the assembly and turn clockwise.
6. Replace light assembly in the bumper and fix with the screw.
7. Insert cover into the bumper and fix with the screw.
Adam Rocks
1. Remove the cover by pulling by hand at the marked position, see
arrow in the illustration.
2. Undo both screws and remove light assembly from the bumper.
3. Disengage and remove the bulb socket by turning anticlockwise.

Vehicle care1754. Remove bulb by turninganticlockwise slightly and
withdrawing. Replace the bulb.
5. Insert the bulb socket into the assembly and turn clockwise.
6. Attach light assembly into the bumper and fix with both screws.
7. Insert and engage cover into the bumper.
Side turn signal lights
To replace bulb, remove lamp
housing:
1. Slide lamp to its left side and remove with its right end.
2. Turn bulb holder anticlockwiseand remove from housing.
3. Pull bulb from bulb holder and replace it.
4. Insert bulb holder and turnclockwise.
5. Insert left end of the lamp, slide to
the left and insert right end.
Number plate light
1. Insert screwdriver in recess of the
cover, press to the side and
release spring.

176Vehicle care
2. Remove lamp downwards, takingcare not to pull on the cable.
3. Remove bulb holder from lamphousing by turning anticlockwise.
4. Pull bulb from bulb holder andreplace it.
5. Insert bulb holder into lamp housing and turn clockwise.
6. Insert lamp into bumper and allow
it to engage.
Interior lights Courtesy light, reading lights
Have bulbs replaced by a workshop.
Load compartment light
Have bulbs replaced by a workshop.
Dome light
Have bulbs replaced by a workshop.
Ambient lightHave bulbs replaced by a workshop.
Starlight panel
Have bulbs replaced by a workshop.Instrument panel illumination
Have bulbs replaced by a workshop.

232IndexAAccessories and vehicle modifications .......................... 160
Adjustable air vents ...................121
Airbag and belt tensioners ...........84
Airbag deactivation ................44, 84
Airbag label................................... 39 Airbag system .............................. 39
Air conditioning regular operation ................................ 122
Air conditioning system .............. 114
Air intake .................................... 121
Air vents...................................... 121
Antilock brake system ................ 134
Antilock brake system (ABS) .......86
Anti-theft alarm system ................25
Anti-theft locking system .............. 25
Appearance care ........................205
Ashtrays ....................................... 77
Automatic anti-dazzle ..................28
Automatic light control ...............106
Automatic locking ........................23
Autostop ..................................... 126
B Battery discharge protection ......112
Battery voltage ............................. 97 Belts.............................................. 37
Bicycle rack .................................. 53
Bonnet ....................................... 162Brake and clutch fluid.................210
Brake and clutch system .............85
Brake assist ............................... 135
Brake fluid .................................. 165
Brakes ............................... 134, 165
Breakdown.................................. 202
Bulb replacement ....................... 168
C Capacities .................................. 222
Car Pass ...................................... 20
Catalytic converter .....................129
Central locking system ................22
Changing tyre and wheel size ...189
Charging system .......................... 84
Child restraint installation locations ................................... 47
Child restraints.............................. 45
Child restraint systems ................45
Cigarette lighter ........................... 77
City mode ................................... 138
Climate control ............................. 15
Climate control systems .............113
Clock ............................................ 74
Code ............................................. 95
Collision damage repair ..............227
Colour-Info-Display .......................93
Control indicators.......................... 81
Control of the vehicle .................123
Controls ........................................ 70