clock VAUXHALL ASTRA J 2014.25 Owner's Guide

244Vehicle care
4. Carefully withdraw tail lightassembly from recesses and
remove. Make sure that the cable duct remains in position.
5. Detach wiring plug from bulb carrier.
6. Remove the bulb holder byturning anticlockwise and replace
the bulb by withdrawing or
pushing the bulb slightly into the
socket and rotating anticlockwise:
Tail lights ( 1 + 2)
Turn signal light ( 3)
Brake light ( 4)
7. Connect the wiring plug and press
the cable into the retainer. Fit light assembly with the retaining pins
into the recesses of the car body
and tighten the securing nuts from
the inside of the load
compartment. Attach cover.
When assembling press the blind
on the left-hand side into the
rubber grommets to reach full
retention force.
Light assembly in the tailgate
1. Open the tailgate and remove the
blind covers on the respective
side.
2. Unscrew and remove the screws. 3. Remove the tail light assembly and detach wiring plug from the
bulb carrier.

Vehicle care245
4. Remove the bulb holder byturning anticlockwise and replace
the bulb by withdrawing or
pushing the bulb slightly into the
socket and rotating anticlockwise:
Tail light ( 1)
Rear fog light/Reverse light ( 2),
depending on the side.
5. Fit the light assembly in the tailgate and tighten the screws
from the inside. Attach all covers.Rear fog light respectively reverse
light ( 2), depending on the side, can
be replaced by a cover in the tailgate
without removing the light assembly:
remove cover, turn bulb holder and
replace the bulb by rotating
anticlockwise.3-door hatchback
1. Release the cover on the respective side and remove it.

246Vehicle care
2. Unscrew both plastic securingnuts from the inside by hand.
3. Carefully withdraw the lightassembly from the recesses and
remove.
4. Detach wiring plug from bulb carrier.
5. Remove the bulb holder by turning and replace the bulb by
withdrawing or pushing the bulb
slightly into the socket and rotating anticlockwise:
Tail light/Brake light ( 1)
Turn signal light ( 2)
version with Light Emitting Diode
(LED)
Only turn signal light ( 2) can be
changed.
6. Insert and turn bulb holder clockwise into the tail light
assembly. Connect the wiring
plug with the light assembly. Fit
light assembly with the retaining
pins into the recesses of the car
body and tighten the securing
nuts from the inside of the load
compartment. Close cover and
engage.
Light assembly in the tailgate
1. Open the tailgate and remove the
covers on the respective side.

Vehicle care247
2. Unscrew three screws.
3. Remove the tail light assembly from tailgate.
4. Remove the bulb holder by turning and replace the bulb by
withdrawing or pushing the bulb
slightly into the socket and
rotating anticlockwise:
Tail light ( 1)
Rear fog light/Reverse light ( 2),
depending on the side.
( 2 ) (only one side)
version with Light Emitting Diode
(LED)
Only rear fog light respectively
reverse light ( 2), depending on the
side, can be changed.
5. Insert and turn bulb holder clockwise into the tail light
assembly. Fit the tail light
assembly in the tailgate and
tighten the screws. Attach all
covers.
Side turn signal lights 3-door hatchback
To replace bulb, remove lamp
housing:1. On left vehicle side, slide lamp to the front and remove it out of the
front wing with the rear end.
On right vehicle side, slide lamp to
the rear and remove it out of the front wing with the front end.
2. Turn bulb holder anticlockwise and remove from housing.

248Vehicle care
3. Pull bulb from bulb holder andreplace it.
4. Insert bulb holder and turn clockwise.
5. On left side: insert front end into front wing, slide forward and insert
rear end.
On right side: insert rear end into
front wing, slide rearward and
insert front end.
5-door hatchback, 4-door
saloon, Sports tourer
To replace bulb, remove lamp
housing:
1. On left vehicle side, slide lamp to the front and remove it out of the
front wing with the rear end.
On right vehicle side, slide lamp to
the rear and remove it out of the front wing with the front end.
2. Turn bulb holder anticlockwise and remove from housing.
3. Pull bulb from bulb holder and replace it.

Vehicle care249
4. Insert bulb holder and turnclockwise.
5. On left side: insert front end into front wing, slide forward and insert
rear end.
On right side: insert rear end into
front wing, slide rearward and
insert front end.
Number plate light
1. Insert screwdriver in recess of the
cover, press to the side and
release spring.
2. Remove lamp downwards, taking care not to pull on the cable.
3. Remove bulb holder from lamp housing by turning anticlockwise.
4. Pull bulb from bulb holder andreplace it.
5. Insert bulb holder into lamp housing and turn clockwise.
6. Insert lamp into bumper and let engage.
Interior lights Courtesy light, reading lights
Have bulbs replaced by a workshop.
Load compartment light Have bulbs replaced by a workshop.
Instrument panel
illumination
Have bulbs replaced by a workshop.

Vehicle care273
1. Install the hexagon key of thewheel wrench ensuring that it
locates securely on the bolt.
2. Turn the wheel wrench anticlockwise to loosen the bolt.
Remove the bolt.
3. Take the extension bolt from the tool bag 3 256 and screw it in
hand-tight using the hexagon key
of the wheel wrench.
4. Store the tool box and the damaged wheel outside up in the
spare wheel well and secure it by
turning the wing nut clockwise on
the bolt.
The floor cover can be placed on the
projecting wheel.
Replace the extension bolt with the
short bolt before placing the
temporary spare wheel in the well after renewing or repairing the
defective wheel.Stowing the spare wheel back in
the well after replacing the
damaged wheel
1. Open the floor cover, untwist and remove wing nut.
Only 3-door hatchback: open floor
cover, remove rear storage,
untwist and remove wing nut and
conus.
2. Only Sports tourer and 4-door saloon with temporary spare
wheel: replace the extension bolt
with the short bolt by using the hexagon key of the wheel wrench.
3. Place the tools in the tool box or the tool bag 3 256.
4. Place spare wheel outside up in the wheel well and secure by
turning the wing nut right back.
Only 3-door hatchback: position
the excentric conus in the recess
of the spare wheel before turning
the wing nut right back.
5. Close floor cover and insert rear storage (only 3-door hatchback).

323
Child restraints.............................. 54
Child restraint systems ................54
Cigarette lighter .........................107
Climate control ............................. 17
Climate control systems .............153
Clock........................................... 105
Code ........................................... 126
Control indicators........................ 111
Control of the vehicle .................162
Controls ...................................... 100
Convex shape .............................. 31
Coolant and antifreeze ...............283
Cruise control ....................119, 181
Cupholders .................................. 60
Curtain airbag system .................. 52
Curve lighting.............................. 143
D Danger, Warnings and Cautions ...4
Daytime running lights ...............143
Declaration of conformity ............319
Diesel fuel system bleeding .......229
Diesel particle filter .............117, 168
Door open .................................. 119
Doors ............................................ 26
Driver assistance systems ..........181
Driver Information Centre ...........119
Driving characteristics and towing tips .............................. 218
Driving hints ................................ 162E
Electric adjustment ......................31
Electrical system......................... 250
Electric parking brake .................115
Electric parking brake fault .........115
Electronic climate control system 156
Electronic driving programmes ..171
Electronic Stability Control.......... 177
Electronic Stability Control and Traction Control system .........116
Electronic Stability Control off .... 116
End-of-life vehicle recovery .......223
Engine compartment fuse box ...251
Engine coolant ........................... 225
Engine coolant temperature gauge ..................................... 109
Engine data ............................... 290
Engine exhaust .......................... 168
Engine identification ...................286
Engine oil ................... 224, 283, 287
Engine oil pressure ....................117
Entry lighting .............................. 150
Event data recorders ..................319
Exit lighting ................................ 151
Exterior care .............................. 278
Exterior light ............................... 118
Exterior lighting ....................14, 140
Exterior mirrors ............................. 31F
Fault ........................................... 171
First aid ......................................... 95
First aid kit ................................... 95
Fixed air vents ........................... 161
Flex-Fix system ............................ 64
Fog light ..................................... 118
Fog lights ................................... 235
Folding mirrors ............................. 31
Following distance indication ......194
Forward collision alert................. 191
Front airbag system .....................51
Front fog lights ........................... 147
Front seats.................................... 40
Front storage ................................ 61
Front turn signal lights ...............237
Fuel............................................. 211
Fuel consumption - CO 2-
Emissions ............................... 217
Fuel for diesel engines ..............211
Fuel for liquid gas operation .......211
Fuel for petrol engines ...............211
Fuel gauge ................................. 109 Fuel selector .............................. 109
Fuses ......................................... 250
G
Gauges ....................................... 108
General information ...................217