phone VAUXHALL ASTRA J 2016.25 Infotainment system

154Infotainment system................130
Menu ....................................... 132
Phone ...................................... 148
USB ......................................... 143
USB ............................................ 141
V
Valet mode Locking .................................... 133
Unlocking ................................ 133
Voice recognition ........................144
Volume Auto volume control ................133
Maximum startup volume ........133
Mute function........................... 130
Setting the volume ..................130
Speed compensated volume ..133
Volume limitation at high
temperatures ........................... 130
Volume settings .......................... 133
W Waveband selection ...................136

Phone holder............................. 156
Index .......................................... 160Phone holder

156Phone holderPhone holderPhone holder............................. 156Phone holder
General information
The phone holder is attached to a
power connector (PowerFlex Bar).
Further information regarding power
connector is available in the Owner's
manual.
Smartphones with following
dimensions can be attached to the
phone holder:
● height: up to 150 mm
● width: 57 to 73.5 mm
● depth: 6 to 11 mm
9 Warning
Devices attached to the phone
holder must be used in a way that
driver distraction is avoided and the vehicle can be driven safely at all times. You must always comply
with the respective laws and
regulations of the country where
you are driving. These laws may
differ from the information in this
manual. If in doubt, stop your
vehicle and operate devices while
the vehicle is stationary.
Caution
To avoid theft, do not leave the mobile phone in the phone holder
when leaving the vehicle.

Phone holder157UsageAdapting the phone holder to the sizeof the smartphone
1. Press both brackets (1) on the
rear side to disengage the shifters
for width adjustment and pull them
out.
2. Press button (2) on left upper side
to disengage shifter for height
adjustment.
3. Insert the smartphone.
4. Adjust the width of the phone holder to the width of the phone by
pushing together the shifters.
Attaching the phone holder to the
power connector
1. Press release button (3) to
disengage locking shifters (4).

158Phone holder
2. Attach the phone holder to thepower connector and press both
locking shifters (4) to lock.
Inserting the phone in the phone holder
1. Press button (2) to disengage
shifter.
2. Insert the smartphone in a way that the power supply of the
smartphone is accessible and no
buttons are pressed.
3. Press down the shifter.
Connecting the smartphone with the power supply
Connect the smartphone to the phone
holder by using the compatible
connecting cable. Different versions
of the connecting cable are available
as accessory.
Operating the smartphone
When the smartphone is connected with the power supply, it will be
charged with ignition on.
For connecting the smartphone with
the Infotainment system, a Bluetooth
connection must be established.

Phone holder159Removing the phone from the phone
holder
1. Disconnect the power supply from
the phone.
2. Press button (2) on left upper side
to disengage shifter for height
adjustment.
3. Remove the smartphone from the
phone holder.
Removing the phone holder from the power connector
1. Press down the shifter for height adjustment.
2. Press the release button (3) andremove the phone holder.

160IndexPPhone holder .............................. 156