change time VAUXHALL CASCADA 2018 User Guide

VAUXHALL CASCADA 2018 User Guide CASCADA 2018 VAUXHALL VAUXHALL https://www.carmanualsonline.info/img/38/19387/w960_19387-0.png VAUXHALL CASCADA 2018 User Guide

Page 111 of 265

VAUXHALL CASCADA 2018 User Guide Instruments and controls109Notice
In any case, if the vehicle is disposed
of, sold or otherwise transferred,
immediately inform OnStar about
the changes and terminate the
OnStar service on this vehicl

Page 112 of 265

VAUXHALL CASCADA 2018 User Guide 110LightingLightingExterior lighting.......................... 110
Light switch .............................. 110
Automatic light control .............111
High beam ............................... 11

Page 120 of 265

VAUXHALL CASCADA 2018 User Guide 118LightingIn the event of an accident with airbag
deployment the hazard warning
flashers are activated automatically.
Turn and lane-changesignalslever up:right turn signallever down:left turn signal

Page 123 of 265

VAUXHALL CASCADA 2018 User Guide Lighting121Lighting features
Entry lighting Welcome lighting
The following lights are switched on
for a short time by unlocking the
vehicle with the radio remote control:
● headlights
● tail light

Page 124 of 265

VAUXHALL CASCADA 2018 User Guide 122LightingExit lighting is switched off
immediately if the turn signal lever is
pulled while the drivers door is open.
Activation, deactivation and duration of this function can be changed in the In

Page 174 of 265

VAUXHALL CASCADA 2018 User Guide 172Driving and operating● Ice, snow, mud, or anything elsecovers the camera lens. Clean
the lens, rinse it with water, and
wipe it with a soft cloth.
● The vehicle had a rear-end accident.
● The

Page 189 of 265

VAUXHALL CASCADA 2018 User Guide Vehicle care187General Information
Accessories and vehicle modifications
We recommend the use of genuine
parts and accessories and factory
approved parts specific for your
vehicle type. We cannot asse

Page 198 of 265

VAUXHALL CASCADA 2018 User Guide 196Vehicle care
2. Remove the bulb from the socketby pulling.
3. Replace and insert new bulb into socket.
4. Insert the bulb socket into the reflector and turn clockwise.
Adaptive forward lighting9 Da
Page:   < prev 1-10 11-20