change wheel VAUXHALL CASCADA 2018 User Guide
[x] Cancel search | Manufacturer: VAUXHALL, Model Year: 2018, Model line: CASCADA, Model: VAUXHALL CASCADA 2018Pages: 265, PDF Size: 7.81 MB
Page 222 of 265

220Vehicle care2. Install the wheel wrench ensuringthat it locates securely and loosen
each wheel nut by half a turn.
The wheels may be protected by
locking wheel nuts. To loosen
these specific nuts, first attach the adapter onto the head of the nut
before installing the wheel
wrench. The adapter is located in
the glovebox.
3. Ensure the jack is correctly positioned under the relevant
vehicle jacking point.
4. Set the jack to the necessary height. Position it directly below
the jacking point in a manner that
prevents it from slipping.
Attach wheel wrench and with the
jack correctly aligned rotate
wrench until wheel is clear of the
ground.
5. Unscrew the wheel nuts. 6. Change the wheel. Spare wheel 3 221.
7. Screw on the wheel nuts.
8. Lower vehicle.
9. Install the wheel wrench ensuring that it is located securely and
tighten each nut in a crosswise
sequence. Tightening torque is
140 Nm.
10. Align the valve hole in the wheel cover with the tyre valve before
installing.
Install wheel nut caps.
Install centre cap on alloy wheels.
11. Stow the replaced wheel 3 221,
the vehicle tools 3 208 and the
adapter for the locking wheel nuts
3 68.
12. Check the tyre pressure of the installed tyre and the wheel nut
torque as soon as possible.
Page 224 of 265

222Vehicle care
2. Remove the floor cover.
3.The spare wheel is secured with a
wing nut in the well. Loosen nut, remove conus and remove the
spare wheel.
Under the spare wheel there is a box and a bag with vehicle tools.
The tool bag is secured with a
tether to the stow rod. Remove
tool box and tool bag tether from
the stow rod to access the tools in the bag. Vehicle tools 3 208.
4. Change the damaged wheel 3 218 and stow the tools back in
the tool box and the bag. Remove
the strap from the box and put
aside.
5. Attach the tool bag tether to the stow rod and place the bag in the
well. Secure the tool box by
installing the conical adapter and
tightening wing nut.
6. Stow the damaged wheel facing upwards in the well.
7. Place the loop end of the strap through the left rear lashing eye.
8. Place the hook end of the strap through the loop and pull it until
the strap is fastened securely to
the lashing eye.
Page 263 of 265

261QQuickheat ................................... 130
R
Radio Frequency Identification (RFID) ..................................... 256
Radio remote control ...................20
REACH ....................................... 252
Reading lights ............................ 120
Rear floor storage cover ..............73
Rear fog light ............................... 92
Rear fog lights ........................... 118
Rear storage ................................. 73
Rear view camera ...................... 170
Recommended fluids and lubricants ........................ 232, 237
Refuelling ................................... 178
Registered trademarks ...............254
Retained power off .....................135
Reversing lights .........................119
Ride control systems ..................151
Rollover protection system ...........44
S Seat adjustment ............................. 7
Seat belt ........................................ 8
Seat belt reminder .......................87
Seat belts ..................................... 54
Seat folding .................................. 50
Seat heating ................................. 53
Seat position ................................ 47Seat ventilation............................. 53
Selective catalytic reduction .......141
Selector lever ............................. 145
Service ............................... 132, 231
Service display ............................ 85
Service information ....................231
Side airbag system ......................61
Side blind spot alert ....................168
Sidelights .................................... 110
Side turn signal lights ................200
Soft top ........................................ 34
Software acknowledgement .......252
Spare wheel ............................... 221
Speed limiter............................... 157
Speedometer ............................... 83
Starting and operating ................135
Starting off ................................... 16
Starting the engine ....................135
Steering ...................................... 134
Steering wheel adjustment ......9, 77
Steering wheel controls ...............77
Stop-start system........................ 136
Storage ......................................... 68
Storage compartments .................68
Sunvisor lights ........................... 120
Sun visors .................................... 34
Symbols ......................................... 4T
Tachometer ................................. 84
Tail lights ................................... 199
Three-point seat belt .................... 55
Tools .......................................... 208
Tow bar....................................... 181
Towing ................................ 181, 226
Towing another vehicle .............227
Towing equipment .....................182
Towing the vehicle .....................226
Traction Control system ............. 151
Traction Control system off........... 90
Traffic sign assistant ...................172
Trailer coupling ........................... 181
Trailer towing ............................. 181
Transmission ............................... 15
Transmission display .................144
Tread depth ............................... 214
Trip odometer .............................. 83
Turn and lane-change signals ...118
Turn signal ................................... 87
Tyre chains ................................ 215
Tyre designations ......................209
Tyre pressure ............................ 213
Tyre pressure monitoring system ............................... 91, 209
Tyre pressures ........................... 246
Tyre repair kit ............................. 215