clock VAUXHALL COMBO D 2017 User Guide
[x] Cancel search | Manufacturer: VAUXHALL, Model Year: 2017, Model line: COMBO D, Model: VAUXHALL COMBO D 2017Pages: 195, PDF Size: 4.64 MB
Page 147 of 195

Vehicle care145Halogen headlights
Headlights have separate systems forlow beam/sidelight 1 (outer bulb),
high beam/daytime running light 2
(inner bulb).
To access bulbs, pull off protective
covers.
Low beam 1. Remove protective cover.
2. Detach connector from bulb.
3. Disengage wire clip and remove bulb from reflector.
4.Insert new bulb in reflector so that
the locating tab of the bulb aligns
with the reflector recess.
5. Attach connector to bulb.
6. Engage wire clip.
7. Install protective cover.
High beam 1. Remove protective cover.
2. Detach connector from bulb.
3. Disengage wire clip and remove bulb from reflector.4. Insert new bulb in reflector so that
the bulb aligns with the reflector
recess.
5. Engage wire clip and attach connector onto bulb.
6. Install protective cover.
Sidelight 1. Remove protective cover. Withdraw bulb holder from
reflector by turning anticlockwise.
Page 148 of 195

146Vehicle care
2. Remove bulb from socket, insertnew bulb.
3. Insert bulb holder in reflector. 4. Rotate clockwise to engage.
5. Install protective cover.
Daytime running light 1. Remove protective cover.2. Withdraw bulb holder from reflector by turning anticlockwise.
3. Remove bulb from socket, insert new bulb.
4. Insert bulb holder in reflector. 5. Rotate clockwise to engage.
6. Install protective cover.
Front turn signal light 1. Remove protective cover.2. Withdraw bulb holder from reflector by turning anticlockwise.
3. Push bulb into holder slightly, rotate anticlockwise, remove and
renew bulb.
4. Insert bulb holder in reflector. 5. Rotate clockwise to engage.
6. Install protective cover.
Fog lights
Have bulbs replaced by a workshop.
Page 149 of 195

Vehicle care147Tail lights
1. Remove the three retainingscrews.
2. Remove lamp assembly from vehicle.
3. Disengage connector plug from bulb holder.
4.Unscrew the four retaining screws
using a screwdriver. Turn bulb
holder for reverse light
anticlockwise and replace bulb.
5. Remove bulb holder and seal from lamp assembly.
6. Push bulb into socket slightly, rotate anticlockwise, remove and
renew bulb.Brake light ( 1)
Turn signal light ( 2)
Tail light ( 3)
Tail light/fog light ( 4)
7. Install seal on bulb holder ensuring it is fitted correctly.
Install bulb holder in lamp
assembly ensuring that it
engages correctly. Tighten the
four retaining screws using a
screwdriver.
8. Install reverse light bulb holder and turn clockwise to tighten.
9. Engage connector plug.
Page 150 of 195

148Vehicle care10. Insert lamp assembly in body,ensuring correct positioning.
Tighten the three retaining
screws.
11. Switch on ignition, operate and check all lights.
Side turn signal lights
Have bulbs replaced by a workshop.
Centre high-mounted brake light
Have bulbs replaced by a workshop.Number plate light
Tailgate
1. Insert screwdriver as indicated by
the arrows, press to the side and
release the bulb housing.
2. Turn the bulb holder anticlockwise
to remove from the bulb housing.
Remove the bulb by pulling.
3. Replace the bulb.
4. Insert bulb holder in bulb housing and rotate clockwise
5. Install the bulb housing ensuring it
engages correctly.
Page 163 of 195

Vehicle care161
If tyre pressure is more than
1.8 bar , set it to the correct value.
Repeat the procedure until there
is no more loss of pressure.
If the tyre pressure has fallen
below 1.8 bar, the vehicle must
not be used. Seek the assistance
of a workshop.
15. Stow away tyre repair kit in load compartment.
Notice
The driving characteristics of the
repaired tyre are severely affected,
therefore have this tyre replaced.
If unusual noise is heard or the
compressor becomes hot, turn
compressor off and allow to cool.
Note the expiry date of the kit. After
this date its sealing capability is no
longer guaranteed. Pay attention to
storage information on sealant
bottle.
Replace the used sealant bottle.
Dispose of the bottle as prescribed
by applicable laws.
The compressor and sealant can be used from approx. -20 °C.
Replacing the sealant canister
To replace the sealant canister: 1. Disconnect the compressor air hose.2. Turn the canister anticlockwise to lift it out.
3. Insert the new canister and turn it clockwise.
4. Connect the compressor air hose to the canister and fit the flexible
filler tube into its allocated space.
Wheel changing
Some vehicles are equipped with a
tyre repair kit instead of a spare wheel 3 159.
Make the following preparations and
observe the following information:
● Park the vehicle on a level, firm and non-skid surface. The front
wheels must be in the straight- ahead position.
● Apply the parking brake and engage first or reverse gear.
● Remove the spare wheel 3 163.
● Never change more than one wheel at once.
● Use the jack only to change wheels in case of puncture, not
for seasonal winter or summer
tyre change.
Page 191 of 195

189Cigarette lighter ........................... 73
Climate control ............................. 15
Climate control systems .............104
Clock....................................... 70, 88
CNG............................................ 184
Collision damage repair ..............186
Control indicators.......................... 77
Control of the vehicle .................110
Controls ........................................ 68
Convex shape .............................. 29
Coolant and antifreeze ...............173
Cruise control ...................... 88, 126
Cupholders .................................. 59
D Danger, Warnings and Cautions ...4
Date .............................................. 88
Daytime running lights ............88, 98
Declaration of conformity ............186
Diesel particle filter ...............84, 116
Distance to next service ...............88
Door open .................................... 88
Doors ...................................... 25, 26
Drain fuel filter ............................. 87
Driver assistance systems ..........126
Driver Information Centre .............88
Driving characteristics and towing tips .............................. 134
Driving hints ................................ 110E
Eco mode (E).............................. 121
Electric adjustment ......................29
Electrical system......................... 150
Electronic climate control system 106
Electronic driving programmes ..121
Electronic Stability Control ..83, 125
Electronic Stability Control (ESC). 83
End-of-life vehicle recovery .......137
Engine compartment fuse box ...152
Engine coolant ........................... 140
Engine coolant temperature ........84
Engine coolant temperature gauge ....................................... 76
Engine data ............................... 178
Engine exhaust .......................... 116
Engine identification ...................176
Engine oil ...........139, 173, 177, 184
Engine oil pressure ......................85
ESC (Electronic Stability Control) 125
Event data recorders ..................186
Exit lighting ................................ 103
Extendable load compartment cover ................................... 61, 65
Exterior care .............................. 168
Exterior light ................................. 87
Exterior lighting ......................12, 97
Exterior mirrors ............................. 29F
Fault ........................................... 121
Fixed air vents ........................... 108
Fog light ....................................... 88
Fog lights ................................... 146
Folding front passenger seat ........37
Folding mirrors ............................. 29
Folding seats .......................... 39, 41
Front airbag system .....................50
Front fog lights ............................. 99
Front passenger seat Folding ...................................... 37
Table position ............................ 37
Front seats.................................... 35
Front storage ................................ 59
Front turn signal light ..................145
Fuel............................................. 130
Fuel consumption .........................88
Fuel consumption - CO 2-
Emissions ............................... 133
Fuel cut-off system .........79, 94, 112
Fuel for diesel engines ..............130
Fuel for natural gas operation ...130
Fuel for petrol engines ...............130
Fuel gauge ................................... 75
Fuel selector ................................ 75
Fuel system messages .........94, 112
Fuel tank ..................................... 184
Fuses ......................................... 150