VAUXHALL COMBO D 2018 Infotainment system

Phone519Warning
Mobile phones have effects on
your environment. For this reason, safety regulations have been
prepared which you should make
yourself familiar with before you use the telephone.
Bluetooth
The Phone portal is certified by the
Bluetooth Special Interest Group
(SIG).
You will find further information about the specification on the Internet at
http://www.bluetooth.com
SMS (Short Message Service) By means of voice synthesis
technology, the Infotainment
system's integrated SMS Message
reader 3 54 can read incoming text
messages on your Bluetooth mobile
phone over the vehicle's sound
system.
The SMS Message reader functions
are managed using the steering
wheel controls or voice commands.
Not all mobile phones support the
voice reading of SMS messages.
Refer to the operating instructions in
your mobile phone handbook or
consult your network provider.
Connection
A mobile phone must be connected to the Handsfree phone system in orderto control its functions via the
Infotainment system.
No phone can be connected to the
system unless it has first been paired.
Refer to the Bluetooth connection
section ( 3 52) for pairing a mobile
phone to the Handsfree phone
system via Bluetooth.
When the ignition is switched to the
MAR position, the Handsfree phone
system searches for paired phones in the vicinity. Bluetooth must be
activated on the mobile phone for the
phone to be recognised by the
Handsfree phone system. Searching
continues until a paired phone is
found.The display message Connecting,
indicates that the phone being
connected. A confirmation of the
connection on the display, shows
details of the paired mobile phone.
Notice
When a Bluetooth connection is
active, using the handsfree phone
system will discharge the mobile
phone battery more rapidly.
Automatic connection
For your phone to connect
automatically when the system is
switched on, it may be necessary to
activate the automatic Bluetooth
connection function on your mobile
phone. Refer to the mobile phone
operating instructions.
If connection fails: ● check the phone is switched on
● check the phone battery is not flat
● check if the phone has already been paired

52PhoneThe Bluetooth function on the mobile
phone and on the Handsfree phone
system must be active and the mobile
phone must be configured to accept
the system connection request.
Bluetooth connection
Bluetooth is a radio standard for the
wireless connection of, e.g., a mobile
phone with other devices.
Compatible mobile phones enable
the user to make and receive calls
and listen to voice messages using the steering wheel controls or by
voice interaction. Information such as
mobile phone contact lists and call
lists can be transferred to the
Infotainment system's memory and shown on the display.
Notice
The functionality may be restricted
depending on the phone make and
model.Pairing a mobile phone to the
Handsfree phone system
Notice
Before pairing a mobile phone, add
contacts to the mobile phonebook so you can call them using the
handsfree system.
In order to use your Handsfree phone
system, a connection must be set up
between the mobile phone and the
system via Bluetooth, i.e., the mobile
phone must be paired to the vehicle
before using it. For this purpose, the
mobile phone must support
Bluetooth . Refer to the operating
instructions for your mobile phone.
To set up a Bluetooth connection, the
Handsfree phone system must be
switched on and Bluetooth must be
activated on the mobile phone.
To pair a mobile phone, use the
following controls on the steering
wheel:
1. Â / MENU : Press
2. R / S : Press to move up/down on
the display
3. SETTINGS : Select option4.SRC/OK : Press to confirm your
selection
5. R / S : Press to move up/down on
the display
6. PAIRING : Select option
7. SRC/OK : Press to confirm your
selection
The display will show Connecting
while the system searches for
available devices via Bluetooth.
If the your mobile phone has been
found by the Handsfree system, a
4-digit PIN number will be shown on
the display.
Enter the PIN number on your mobile phone keypad and you will receive a
confirmation on the display showing
details of the mobile phone that has
been successfully paired.
Notice
The PIN number used for pairing a
mobile phone is produced randomly
by the Infotainment system each
time a new phone is paired,
therefore you do not need to
remember it. If you lose it, you can
still use the handsfree system.

Phone53Notice
If the PIN number is not entered within a few minutes, the operation
is automatically cancelled.
The pairing procedure can also be
activated with the voice recognition
system 3 42.
Notice
If another phone is automatically
connected during a new pairing
procedure, it will automatically be
disconnected, to allow the new
pairing procedure to continue.
Notice
To interrupt the pairing procedure at
any time, press the à / q button on
the steering wheel. An error
message will appear in the display
confirming that pairing was not
successful.
The first time a mobile phone is
paired, the system gives a welcome
message as soon as it is connected.
This message will not be given during
subsequent connection of the same
mobile phone.You only need to pair your phone
once. After that, the Handsfree
system will connect automatically
every time you turn the ignition key to
the MAR position.
Notice
The mobile phone's Bluetooth
function must be activated, so that
the Infotainment system will
recognise the phone each time you
enter your vehicle and turn the
ignition key to the MAR position.
Notice
If the pairing fails, check to ensure
that the device lists the vehicle
phone system.
It may be necessary to delete the device from the device list and pair
as a new device.
When the system has completed the
pairing, it will then ask you if you want to copy across the contacts of the
phone you have just paired 3 54.
When the pairing is complete, the
phone is automatically connected to
the Handsfree phone system. Themobile phone can then be operated
via the Infotainment system controls
on the steering wheel.
Unpairing a mobile phone from
the Handsfree phone system
If the maximum amount of paired
phones have been used, a new
phone can only be paired if an
existing phone is unpaired.
To unpair a mobile phone, use
buttons on the steering wheel:
1. Â / MENU : Press
2. R / S : Press to move up/down on
the display
3. SETTINGS : Select option, then
press the SRC/OK button to
confirm
4. R / S : Press to move up/down on
the display
5. User data : Select option, then
press the SRC/OK button to
confirm

54Phone6.R / S : Press to move up/down on
the display
7. Delete users : Select option, then
press the SRC/OK button to
confirm
Delete the device from the list of
Bluetooth devices on your mobile
phone. Refer to the operating
instructions for your mobile phone.
Unpairing a phone erases all of its
downloaded contacts and its call
history from the Handsfree system.
Emergency call9 Warning
Connection setup cannot be
guaranteed in all situations. For
this reason, do not rely exclusively on a mobile phone when a vitally
important communication (e.g. a
medical emergency) is concerned.
On some networks, it may be
necessary for a valid SIM card to
be properly inserted in the mobile
phone.
9 Warning
Bear in mind that you can make
and receive calls with the mobile
phone, if it is in a service area with
a sufficiently strong signal. Under
certain circumstances emergency
calls cannot be made on all mobile phone networks; it is possible that
they cannot be made when certain network services and/or telephone
functions are active. You can
enquire about this with the local
network operators.
The emergency call number can
differ depending on the region and country. Please enquire
beforehand about the correct
emergency call number for the
relevant region.
Making an emergency call
Dial the emergency call number (e.g.
112 ).
The telephone connection to the
emergency call centre is set up.
Answer when the service personnel
questions you about the emergency.
9 Warning
Do not end the call until you are
requested to do so by the
emergency call centre.
Operation
Introduction When a Bluetooth connection has
been set up between your mobile phone and the Handsfree phone
system, the functions of your mobile
phone can be operated
predominantly via the Infotainment
system controls on the steering
wheel.
The Handsfree phone system may
also be operated by using voice
commands 3 42.
It is then possible, e.g., to import and
update the telephone numbers and
contacts stored in your mobile phone
into the Handsfree phone system.
After connection, the mobile phone
data is transmitted to the Handsfree
phone system. This can take some
time, depending on phone model.

Phone55During this period, operation of the
mobile phone is possible only to a limited extent.
Notice
Not every mobile phone supports the functions of the handsfree phone
system. Therefore, deviations from
the range of functions described are possible.
Phone controls
The most important phone controls
are as follows:
Controls on the steering wheel: ● Â / MENU : Activate phone
menu, confirm selected menu option, accept call, change
phone conversation, select
displayed message, reject/end
call 3 19
● SRC/OK : Confirm selected menu
option, transfer phone
conversation from Handsfree
system to mobile phone and vice
versa, select SMS message
displayed 3 19● Ã / q : Deactivate voice
recognition, interrupt a voice
message/reading of a text
message, exit phone menu, exit
sub-menu and return to previous
menu, exit current selection
without saving, deactivate/
reactivate microphone during
phone conversation, mute
ringtone for incoming calls 3 19
● s: Activate voice recognition,
interrupt voice message and give new voice command, repeat last
voice message played 3 42
● < / ]: Adjust volume 3 19
● R / S : Scroll through menu, scroll
through text messages 3 54
Phone settings
Select the phone settings option
menu:
1. Â / MENU : Press
2. R / S : Press to select the
SETTINGS option
3. SRC/OK : Press to confirmWhen the desired phone setting
adjustments have been confirmed,
press the à / q button on the
steering wheel to exit the phone menu and save the changes.
Restore default phone settings
Delete all the data and contacts for all
paired phones, and restore the
Handsfree system to its original
settings, by selecting the following
menu options:
1. Â / MENU : Press
2. R / S : Press to select the
SETTINGS option, then press the
SRC/OK button to confirm
3. Select the User data option, then
press the SRC/OK button.
4. Select the Delete all option, then
press the SRC/OK button to
confirm
The question Delete all? will be
shown on the display. To delete all
data, confirm by pressing the
SRC/OK button to confirm, or cancel
by pressing the à / q button.

56PhoneNotice
It is not possible to delete the user
data for a single mobile phone if it is
not the only one paired with the
Infotainment system.
Volume control
The fixed phone volume can be
adjusted by selecting the Speech
volume option, using the buttons on
the Infotainment system 3 19.
The Speech volume function allows
you to:
● adjust the preset volume
● adjust the phone volume level during a conversation, whilst the
vehicle is in motion.
● temporarily adjust the preset volume of an ongoing call
● adjust the volume of a vocal announcement in progressPhone menu
To display the phone menu items, use
buttons on the steering wheel:
1. Â / MENU : Press
2. R / S : Press to move up/down on
the display and highlight your
desired option
3. SRC/OK : Press to confirm your
selection
4. Ã / q : Press to exit the phone
menu
Display screen operation
The phone menu options shown on
the display are as follows:
● LAST CALLS : lists recent calls,
made or received. The list can be
downloaded from your mobile
phone's memory, and is updated
during Handsfree use.
● PHONEBOOK : allows you to
view the numbers in your
phonebook and select one to
make a call. Names in the
phonebook are grouped
alphabetically.● MESSAGE READER : allows you
to read the last text message received, call the sender of the
message or delete it. You can
store up to 20 text messages in a dedicated inbox and listen tothem later, call the sender or
delete them. You can also set the
notification methods for received
SMS messages.
● SETTINGS : allows you to
manage the names in your
phonebook, pair a new device or
access the PIN code for the
Handsfree system.
Dialling a telephone number Several options are available for
dialling telephone numbers. These
include the following:
● Calling a contact from the phonebook
● Call the caller or recipient of the most recent calls
● Call the sender or recipient of an SMS message

Phone57Press the  / MENU button on the
steering wheel to display the phone
menu options.
Select the an option from the
following list to dial a phone number:
● LAST CALLS : This option
provides a list of numbers
relating to the most recent phone calls you have made and
received. It may contain a
maximum of 10 received calls,
10 outgoing calls and five missed calls
● PHONEBOOK : If a copied
phonebook contains more than
1000 contact names, the system
may operate more slowly
● MESSAGE READER : Up to
20 text messages can be stored
in a dedicated inbox and listened
to at a later date
You are able to access any of the
above options to make a call directly.
Select your desired recipient and
press the  / MENU button on the
steering wheel.The dialling function may also be
operated by using voice commands
3 42.
Phonebook The phonebook contains contact lists
available only to the current vehicle
user. For reasons of confidentiality,
each downloaded contacts list can
only be viewed when the
corresponding phone is connected.
After setting up the connection, the
contact list on your mobile phone can be copied to the Handsfree phone
system.
When asked by the system whether
to copy the contacts list, press
SRC/OK (Yes ) or à / q (No ) button
on the steering wheel. Alternatively, say " Yes" or " No" using voice
commands 3 42.
After a mobile phone contact list has
been copied to the Handsfree phone
system, every time the phone is
connected, the system's phonebook
is updated automatically.Notice
Not all mobile phones copy contact names in the phonebook
automatically, but have to be
transferred manually, using the
mobile phone keypad. If prompted
by the system, carry out this
procedure following the specific
operating instructions for your
mobile phone.
Dialling a number from the
phonebook
The PHONEBOOK option allows you
to view all names and phone numbers stored. The names are listed
alphabetically.
To make a call using either a name or
number:
1. Â / MENU : Press
2. R / S : Press to move up/down on
the display
3. PHONEBOOK : Select option,
then press the SRC/OK button to
confirm
4. R / S : Press to move up/down on
the display and select the desired name/number

58Phone5. / MENU : Press to dial
6. Ã / q : Press to exit the phone
menu
Dialling a name or number from the phonebook is also possible using the
voice recognition system s 3 42.
Adding contacts to the phonebook
After a phone has been paired, the
option to copy the phone contacts
automatically is given by the
Infotainment system.
Contacts can also be added manually
to the phonebook at a later date by
pressing the  / MENU and selecting
the following display options:
● SETTINGS
● User data
● Add contacts
Deleting phonebook contacts
Phone book contacts can be deleted
from the Handsfree system by
selecting the following menu options:
1. Â / MENU : Press
2. R / S : Press to move up/down on
the display3. SETTINGS : Select option, then
press the SRC/OK button to
confirm
4. User data : Select option then
press the SRC/OK button to
confirm
5. Delete users : Select option then
press the SRC/OK button to
confirm
The question Delete users? will be
shown on the display. To delete all
data, confirm by pressing the
SRC/OK button, or cancel by
pressing the à / q button.
Last call
To dial a number from the call history
lists (e.g. dialled numbers, received
calls, missed calls), select the
following:
1. Â / MENU : Press
2. R / S : Press to move up/down on
the display
3. LAST CALLS : Select option, then
press the SRC/OK button to
confirm4. R / S : Press to move up/down on
the display and select the desired contact
5. Â / MENU : Press to dial
6. Ã / q : Press to exit the phone
menu
Receiving calls
When receiving a call, the following
options are available:
● Â / MENU : Short press
( Accept an incoming call )
● Â / MENU : Long press
( Reject an incoming call )
● Ã / q : Short press
( Ignore an incoming call )
● Â / MENU : Long press
( End a call )
When receiving a call, the caller
number may be shown on the display.
If the number is stored in the system
memory, the name will be displayed
instead. If the number cannot be
displayed, the message Private
number will be shown on the display.

Phone59Notice
The handsfree phone system
ringtone is dependent upon your
mobile phone's personalised
ringtones, phone model and mode
(silent, vibrate, etc.).
Functions during a telephone call
In addition to volume control, various
functions are available during a call:
● To put the caller on hold and disable the microphone, press
the à / q button on the steering
wheel. To resume the call, press
the à / q button again.
● The Call alert function informs
you of another incoming call and
allows you to answer the
incoming call whilst another
conversation is in progress, and
switch from one call to the other.
To answer the incoming call,
press the  / MENU button on
the steering wheel. The system
will switch to the incoming phone call and will put the currentconversation on hold. Press the
 / MENU button again to switch
from caller to caller.
● Switch the call from the Handsfree phone system to the
mobile phone by pressing the
SRC/OK button on the steering
wheel. You can talk on your
mobile and continue to use the
steering wheel controls. In
particular, if you have more than
one active conversation, you can press the  / MENU button to
switch from one phone call to the other. Press and hold the  /
MENU button briefly to end the
current conversation.
SMS (Short Message Service)
The Infotainment system's integrated
SMS Message reader reads incoming
text messages on your mobile phone
with via Bluetooth over the vehicle's
sound system.
It is possible store up to 20 SMS
messages on the Infotainment
system, after which when a new
message is received, the oldest
message in the inbox will be deleted.The SMS Message reader is capable
of recognising and reading any
abbreviations and interpreting the
most common emoticons, e.g.
"Smiley".
The functions of the SMS Message
reader are managed using the
steering wheel controls 3 8 or voice
commands 3 42.
Notice
Not all mobile phones support the
voice reading of SMS messages or
the automatic transfer of contacts.
Refer to the operating instructions in
your mobile phone handbook or
consult your network provider.
The main functions of the SMS
Message reader are as follows:
● Alert you of a new incoming text message on your mobile phone
via Bluetooth , showing the name/
number of the sender on the display.
It will also suggest reading the
message to you
● Manage the text message inbox on the mobile phone connected
to the Infotainment system

60Phone● Re-read messages that havealready been received and saved
● Make a voice call to the sender of
the text message, by using the
steering wheel controls or voice
commands
● Delete individual text messages or the entire SMS inbox, using
the steering wheel controls or voice commands.
To operate the SMS functions via the
steering wheel controls, select the
following options:
1. Â / MENU : Press
2. R / S : Press to move up/down on
the display
3. MESSAGE READER : Select
option
4. SRC/OK : Press to confirmScroll through the following
MESSAGE READER options, then
highlight the desired option, then press the SRC/OK button:
● Read last one : Reads the last
message received, call the
sender of the message, deleting
message
● INBOX : Shows received
messages, reads saved
messages, displays information
and identity of the sender
● DELETE : Deletes a message
The system will ask you to
DELETE? . Confirm the deletion
by pressing the SRC/OK button,
or cancel by pressing the à / q
button.
● Delete all : Deletes all messages
The system will ask you to Delete
all? . Confirm the deletion by
pressing the SRC/OK button, or
cancel by pressing the à / q
button.Signal type
The SMS Message reader lets you
choose from three options for the
notification you get when you receive
a new text message.
To adjust the setting, use the
following steering wheel controls:
1. Â / MENU : Press
2. R / S : Press to move up/down on
the display
3. MESSAGE READER : Select
option, the press the SRC/OK
button to confirm
4. R / S : Press to move up/down on
the display
5. SIGNAL TYPE : Select option, the
press the SRC/OK button to
confirm
6. R / S : Scroll through the menu
and select one of the following
options, then press the SRC/OK
button to confirm the selection: