spare wheel VAUXHALL COMBO E 2020 User Guide

Vehicle care2415. Change the wheel.
6. Position the damaged wheel with the outside down in the spare
wheel holder.
7. Lift the spare wheel holder and engage in the catch. The open
side of the catch must point in the direction of travel.
8. Close the spare wheel holder by turning the hexagon bolt
clockwise using the wheel
wrench.
9. Stow wheel wrench in the storage.
10. Close the tailgate or the rear doors.
Only mount one temporary spare
wheel. The permissible maximum
speed on the label on the temporary
spare wheel is only valid for the
factory-fitted tyre size.
Fitting the spare wheel Make the following preparations and
observe the following information:
● Park the vehicle on a level, firm and non-skid surface. The front
wheels must be in the straight-
ahead position.● If necessary, place a chock under
the wheel diagonally opposite the wheel to be changed.
● Apply the parking brake and engage first gear, reverse gear or
P .
● Remove the spare wheel 3 240.
● Never change more than one wheel at once.
● Use the jack only to change wheels in case of puncture, not
for seasonal winter or summer
tyre change.
● The jack is maintenance-free. ● If the ground on which the vehicle
is standing is soft, a solid board
(max. 1 cm thick) should be
placed under the jack.
● Take heavy objects out of the vehicle before jacking up.
● No people or animals may be in the vehicle when it is jacked-up.
● Never crawl under a jacked-up vehicle.
● Do not start the vehicle when it is
raised on the jack.● Before screwing in the wheel bolts, clean them.9Warning
Do not grease wheel bolts.
9Warning
Ensure to use always the correct
wheel bolts if changing the
wheels. When installing the spare
wheel, the bolts for alloy wheels can also be used.

242Vehicle care● Note that the spare wheel issecured by the conical contact ofeach bolt if the wheel bolts for the alloy wheels are used. In this
case, the washers do not come
into contact with the spare wheel.
1. Disengage wheel bolt caps with the wheel bolt cover remover.
3 230
Steel wheels with cover: Pull off
the wheel cover.
Alloy wheels: Disengage wheel
bolt caps with the wheel bolt cover
remover.2. Attach the wheel wrench and loosen each wheel bolt by half a
turn.
The wheels might be protected by
locking wheel nuts. To loosen
these specific nuts first attach the
adapter onto the head of the nut
before installing the wheel
wrench. The adapter is located in
the tool box. 3 230
3. Ensure the jack is correctly
positioned under the relevant
vehicle jacking point.
4. Set the jack to the necessary height. Position it directly below
the jacking point in a manner that
prevents it from slipping.

Vehicle care243Ensure that the edge of the body
fits into the notch of the jack.
With the jack correctly aligned
rotate wheel wrench until wheel is
clear of the ground.
5. Unscrew the wheel nuts.
6. Change the wheel. Spare wheel 3 240.
7. Screw on the wheel nuts.
8. Lower the vehicle and remove jack.
9. Install the wheel wrench ensuring that it is located securely and
tighten each bolt in a crosswise
sequence. Tightening torque is
115 Nm.
If the vehicle is equipped with
alloy wheels, note that the wheel
bolts can also be used for the steel spare wheel. In this case, the
spare wheel is secured by the
conical contact of each bolt.
10. Align the valve hole in the wheel cover with the tyre valve before
installing.
Install wheel nut caps.
11. Stow the replaced wheel 3 240,
the vehicle tools 3 230 and the
adapter for the locking wheel nuts.
12. Check the tyre pressure of the installed tyre and the wheel nuttorque as soon as possible.Jump starting
Do not start with quick charger.
A vehicle with a discharged vehicle
battery can be started using jump
leads and the vehicle battery of
another vehicle.9 Warning
Be extremely careful when starting
with jump leads. Any deviation
from the following instructions can
lead to injuries or damage caused
by battery explosion or damage to the electrical systems of both
vehicles.
9 Warning
Avoid contact of the battery with
eyes, skin, fabrics and painted
surfaces. The fluid contains
sulphuric acid which can cause
injuries and damage in the event
of direct contact.
● Never expose the vehicle battery
to naked flames or sparks.

275PPanoramic view system ..............193
Parking ................................ 19, 150
Parking assist ............................ 183
Parking brake ..................... 103, 160
Parking heater ............................ 138
Parking lights ............................. 126
Particulate filter ........................... 151
Passenger side camera ..............192
Performing work ........................213
Peripheral lighting .......................129
Power button .............................. 144
Power outlets ............................... 93
Power windows ............................ 40
Preheating ................................. 105
Puncture ..................................... 240
R Radio Frequency Identification (RFID) ..................................... 271
Radio remote control ...................21
Rain sensor ................................ 107
REACH ....................................... 267
Reading lights ............................ 127
Rear doors ................................... 30
Rear fog light .............107, 125, 224
Rear view camera ...................... 196
Rear view display .................39, 113
Rear windows .............................. 42
Rear window wiper and washer ..92Recommended fluids and
lubricants ........................ 254, 258
Refuelling ................................... 204 Registered trademarks ...............267
Removing seats ............................ 51
Reversing lights .........................126
Ride control systems ..................163
Roadside assistance ..................119
Roller blinds ................................. 43
Roof .............................................. 43
Roof load ...................................... 85
Roof rack ..................................... 84
S Safety net .................................... 79
Seat adjustment ....................... 7, 46 Seat belt ........................................ 8
Seat belt reminder .....................101
Seat belts ..................................... 54
Seat folding .................................. 47
Seat heating ................................. 49
Seat position ................................ 45
Second row seats ........................50
Selective catalytic reduction .......152
Selective ride control ..................165
Selector lever.............................. 155
Service ............................... 141, 251
Service display ............................ 99
Service information ....................251
Service vehicle soon .................. 102Side airbag system ......................60
Side blind spot alert ............107, 191
Sidelights .................................... 121
Side turn lights ........................... 226
Sliding door .................................. 29
Sliding side door ........................... 29
SOS ............................................ 119
Spare wheel ............................... 240
Speed limiter....................... 107, 169
Speedometer ............................... 97
Starting and operating ................143
Starting off ................................... 17
Starting the engine ....................145
Steering ...................................... 143
Steering wheel adjustment ......9, 89
Steering wheel controls ...............89
Stop engine ................................ 102
Stop-start system........................ 147
Storage ......................................... 69
Storage compartments .................69
Sunvisor lights ........................... 127
Sun visors .................................... 43
Symbols ......................................... 4
System check ............................. 103
T
Tachometer ................................. 98
Tailgate ......................................... 31
Tail lights ................................... 224
Third row seats ............................ 51