88Phone
Restore default phone settings
To restore phone settings to their
default values, select  Default
settings  by turning and pressing the
rotary knob. Confirm modification with
the display option when prompted.
Display software version
To display the software version,
select  Display software version  by
turning and pressing the rotary knob.
CD35 BT - Phone settings
Press the  SETUP / TEXT  button and
select the  Phone settings  menu.
Activate/deactivate automatic call
waiting
To activate or deactivate automatic
call waiting, access the  Put on hold
menu, then select either  Automatic
(the default setting) or  Manual.
During automatic mode, a tone will
sound to indicate that a call is on hold.Change ringtones
The vehicle ringtone or phone
ringtone can be changed for incoming
calls. Access the  Ring tone menu,
then select  Vehicle or Phone .
Notice
Depending on phone model, the
ringtone transfer function may not be
available.
Restore default phone settings
To restore phone settings to their
default values, select  Default
settings  by turning and pressing the
rotary knob. Confirm modification with the display option when prompted.
Display software version
To display the software version,
select  Display software version  by
turning and pressing the rotary knob.Mobile phones and CB
radio equipment
Installation instructions and operating guidelines The vehicle specific installation
instructions and the operating
guidelines of the mobile phone and
handsfree manufacturer must be
observed when installing and
operating a mobile telephone. Failure to do so could invalidate the vehicle
type approval (EU directive 95/54/
EC).
Recommendations for fault-free
operation:
■ Professionally installed exterior antenna to obtain the maximum
range possible,
■ Maximum transmission power 10 watts,
■ Installation of the phone in a suitable spot, consider relevant
Note in the Owner's Manual section
Airbag system .