hand brake VAUXHALL ZAFIRA TOURER 2015 Owner's Manual

Driving and operating167Caution
It is not advisable to drive with thehand resting on the selector lever.
Brakes
The brake system comprises two independent brake circuits.
If a brake circuit fails, the vehicle can
still be braked using the other brake
circuit. However, braking effect is
achieved only when the brake pedal
is depressed firmly. Considerably
more force is needed for this. The
braking distance is extended. Seek the assistance of a workshop before
continuing your journey.
When the engine is not running, the
support of the brake servo unit
disappears once the brake pedal has been depressed once or twice.
Braking effect is not reduced, but
braking requires significantly greater
force. It is especially important to bear
this in mind when being towed.
Control indicator R 3 109.
Antilock brake system
Antilock brake system (ABS)
prevents the wheels from locking.ABS starts to regulate brake pressure as soon as a wheel shows a tendency to lock. The vehicle remains
steerable, even during hard braking.
ABS control is made apparent
through a pulse in the brake pedal
and the noise of the regulation
process.
For optimum braking, keep the brake
pedal fully depressed throughout the
braking process, despite the fact that
the pedal is pulsating. Do not reduce
the pressure on the pedal.
After starting off the system performs
a self-test which may be audible.
Control indicator u 3 110.
Adaptive brake light During full braking, all three brake
lights flash for the duration of ABS
control.

216Driving and operating
■The coupling ball bar must be firmly
engaged in the opening.
■ The coupling ball bar must be locked and the key removed.9 Warning
Towing a trailer is permitted only
when a coupling ball bar is fitted correctly. If the coupling ball bardoes not engage correctly, seekthe assistance of a workshop.
Dismounting the coupling ball
bar
Open the protective flap and turn the
key to position c to unlock the
coupling ball bar.
Pull out rotary handle and turn
clockwise as far as it will go. Pull out coupling ball bar downwards.
Insert sealing plug in opening. Fold away socket.
Trailer stability assist If the system detects snaking
movements, engine power is reduced
and the vehicle/trailer combination is
selectively braked until the snaking ceases. While system is working keep steering wheel as still as possible.
Trailer stability assist (TSA) is a
function of the Electronic Stability
Control 3 171.

248Vehicle care
The use of tyre chains is not permittedon the temporary spare wheel.
Tyre repair kit
Minor damage to the tyre tread can be
repaired with the tyre repair kit.
Do not remove foreign bodies from
the tyres.
Tyre damage exceeding 4 mm or that
is at tyre's sidewall cannot be repaired with the tyre repair kit.9 Warning
Do not drive faster than 50 mph.
Do not use for a lengthy period.
Steering and handling may be
affected.
If you have a flat tyre:
Apply the parking brake and engage
first gear, reverse gear or P.
The tyre repair kit is on the left side in
the load compartment behind a cover.
1. Take the tyre repair kit from the compartment.
2. Remove the compressor.3. Remove the electrical connection cable and air hose from the
stowage compartments on the
underside of the compressor.

Vehicle care257Jump starting
Do not start with quick charger.
A vehicle with a discharged battery
can be started using jump leads and the battery of another vehicle.9 Warning
Be extremely careful when starting
with jump leads. Any deviation
from the following instructions can
lead to injuries or damage caused
by battery explosion or damage to the electrical systems of both
vehicles.
9 Warning
Avoid contact of the battery with
eyes, skin, fabrics and painted
surfaces. The fluid contains
sulphuric acid which can cause
injuries and damage in the event
of direct contact.
■ Never expose the battery to naked flames or sparks.
■ A discharged battery can alreadyfreeze at a temperature of 0 °C.
Defrost the frozen battery before
connecting jump leads.
■ Wear eye protection and protective
clothing when handling a battery.
■ Use a booster battery with the same voltage (12 Volts). Its
capacity (Ah) must not be much less than that of the discharged
battery.
■ Use jump leads with insulated terminals and a cross section of at
least 16 mm 2
(25 mm 2
for diesel
engines).
■ Do not disconnect the discharged battery from the vehicle.
■ Switch off all unnecessary electrical
consumers.
■ Do not lean over the battery during jump starting.
■ Do not allow the terminals of one lead to touch those of the other
lead.
■ The vehicles must not come into contact with each other during the
jump starting process.■ Apply the parking brake, transmission in neutral, automatictransmission in P.
■ Open the positive terminal protection caps of both batteries.
Lead connection order:
1. Connect the red lead to the positive terminal of the booster
battery.
2. Connect the other end of the red lead to the positive terminal of the
discharged battery.

292
GGauges ....................................... 101
General information ...................212
Glass panel .................................. 33
Glovebox ..................................... 62
Graphic-Info-Display, Colour- Info-Display ............................ 118
H Halogen headlights ....................226
Hand brake ......................... 167, 168
Hazard warning flashers ............139
Headlight flash ........................... 134
Headlight range adjustment ......134
Headlights................................... 132
Headlights when driving abroad 135
Head restraint adjustment .............8
Head restraints ............................ 35
Heated mirrors ............................. 29
Heated rear window ..................... 32
Heated steering wheel .................94
Heating ........................................ 42
Heating and ventilation system . 144
High beam ......................... 112, 133
High beam assist ................113, 133
Hill start assist ........................... 170
Horn ....................................... 14, 94I
Identification plate .....................267
Ignition switch positions .............154
Immobiliser .......................... 27, 112
Indicators .................................... 101
Information displays.................... 114
Instrument cluster ......................101
Instrument panel fuse box .........238
Instrument panel illumination .....234
Instrument panel illumination control .................................... 141
Instrument panel overview ........... 10
Instrument panel storage ..............62
Interactive driving system ...........171
Interior care ............................... 262
Interior lighting ............................ 141
Interior lights ...................... 141, 234
Interior mirrors .............................. 29
Interruption of power supply ......165
Introduction .................................... 3
ISOFIX child restraint systems ....61
J Jump starting ............................. 257
K Keys ............................................. 19
Keys, locks ................................... 19L
Lane departure warning .....110, 201
Lashing eyes ............................... 85
Lighting features .........................142
Light switch ................................ 132
Load compartment ................24, 75
Load compartment cover .............78
Load compartment fuse box ......239
Loading information .....................91
Load rails and hooks ...................85
Low fuel ..................................... 112
Low washer fluid ........................113
M Malfunction indicator light ..........108
Manual anti-dazzle ......................29
Manual mode ............................. 164
Manual transmission .................. 166
Manual windows ..........................30
Memorised settings ......................21
Mirror adjustment ........................... 9
Misted light covers .....................140
N New vehicle running-in ..............154
Number plate light .....................233
O
Object detection systems ...........189
Odometer ................................... 101