brake VOLKSWAGEN BORA 1998 Service Manual

Downloaded from www.Manualslib.com manuals search engine
01-226


V.A.G 1551 print-out
Possible cause
Repair
01435
Sender 1 for brake
booster -G201-
Electrical malfunction
in current circuit
1)
Connections

Voltage supply is less than 5
Volt

Open circuit, short to
positive or Ground in the
wiring - Check wiring and connections
using current
flow diagram
- Perform electrical check Page
01-288

Sender 1 for brake booster-
G201- faulty
Repair Manual, Brake System,
Repair Group 45
- Replace sender 1 for brake
booster-G201-
- Perform a zero compensation:
- Initiate basic setting
Page 01
-
264 Display group number 066
1) For ABS/EDL/ASR/ESP an d ABS/EDL/ASR/ESP 4MOTION
Стр. 68
из 129
On Board Diagnostic (OBD), performing
Volkswagen Technical Site: http://v olkswagen.msk.ru http://vwts.info http://vwts.ru
огромный архив документации по автомобилям Volkswagen, Skoda, Seat, Audi

Downloaded from www.Manualslib.com manuals search engine 01-228


V.A.G 1551 print-
out Possible cause
Repair
01542
Sender for rotation
rate -G202-
Implausible signal
1)
- Read measured value block
Page 01
-240 Display group number
004
Installation of sender for
rotation rate -G202- is not
OK. - Check installation of sender for
rotation rate -G202-

Open circuit, short to positive
or Ground in the wiring - Check wiring and connections using
wiring diagram
- Perform electrical check Page
01-288
Sender for rotation rate -
G202- faulty
Repair Manual, Brake System,
Repair Group 45 - Replace sender for rotation rate -
G202-
1) For ABS/EDL/ASR/ESP and ABS/EDL/ASR/ESP 4MOTION
Стр. 70из 129 On Board Diagnostic (OBD), performing

Downloaded from www.Manualslib.com manuals search engine 01-229


V.A.G 1551 print-
out Possible cause
Repair
01542
Sender for rotation
rate -G202-
1)
Electrical
malfunction in
current circuit Connections

Voltage supply is less
than 5 Volt


Open circuit, short to
positive or Ground in the
wiring - Check wiring and connections using
wiring diagram
- Perform electrical check Page 01
-
288

Sender for rotation rate -
G202- faulty
Repair Manual, Brake System, Repair
Group 45; Removing and installing parts
of ESP system - Replace sender for rotation rate -
G202-
1) For ABS/EDL/ASR/ESP and ABS/EDL/ASR/ESP 4MOTION
Стр. 71из 129 On Board Diagnostic (OBD), performing

Downloaded from www.Manualslib.com manuals search engine 01-232


ABS control module, coding

Note:

All functions which could previously be
performed with V.A.G 1551 can now also be
carried out with the tester VAS 5051.

ABS warning light -K47- and warning light for
brake system -K118- flash when ABS control
module (w/EDL) -J104- is coded with 00000. An
entry is not made in the DTC memory.

The ABS control module (w/EDL) -J104- must
be recoded if the vehicle relevant coding is not
displayed or the control module has been
replaced.
Coding is only possible after the workshop code
(WSC) has been introduced into V.A.G 1551.
Стр. 74из 129 On Board Diagnostic (OBD), performing

Downloaded from www.Manualslib.com manuals search engine 01-233



Test sequence

- Connect V.A.G 1551 scan tool and select
(address word 03) brake electronics control
module with ignition switched on; Page 01
-
163 .

- Establish engine code.
Rapid data transfer HELP
Select function XX Indicated on display:
- Input 07 for the function "Code control module"
and confirm with Q key.
Rapid data transfer Q
07 - Code control module Indicated on display:
- Confirm input with Q key.
Coding control module Q
Enter code number XXXXX
(0-32000)
Indicated on display:
- Enter the relevant code number for this vehicle
and confirm with Q key.
Coding variations Page 01
-236 .
1C0 907 379E ESP FRONT MK60 0103
Coding 0011266 WSC 00000
On the display the control module identification and
coding are displayed , e.g.:
Стр. 75из 129 On Board Diagnostic (OBD), performing

Downloaded from www.Manualslib.com manuals search engine 01-235


PR number
Brakes
1LS FS III Brakes
1LQ FS III Brakes
1ZM FS III Brakes
1ZF FS III Brakes
1ZP FS III Brakes
PR number
Brakes
1LE FN 3 Brakes
1LJ FN 3 Brakes
1ZE FN 3 Brakes
1ZD FN 3 Brakes
Стр. 77из 129 On Board Diagnostic (OBD), performing

Downloaded from www.Manualslib.com manuals search engine 01-238


Table for ABS/EDL/ASR/ESP, coding
Vehicles with front wheel drive
Note:

The control module must be coded with the same code number as the previous control
module installed in the vehicle
With control unit identification number 1C0 907 379 E/G/M for vehicles from 10.00
Engine
Engine codes
Brake type1)
Heavy duty
package
2) Coding
2.0 Itr. AEG; AVH; AZG; BEV; BBW FS III without 22530
with 22658
1.8 Itr. AWD; AWW; AWP FN 3 without 19970
with 20098
1.9 Itr. TDI ALH FS III without 19458
with 19586
2.8 Itr. AFP FN 3 without 19970
with 20098
2.8 Itr. BDF FN 3 without 19970
Continued on next page:
1) Overview of types of brakes (PR No.) Page 01-234 .
2) Overview of types of vehicle.
Repair Manual, Suspension, Wheels, Steering, Repair Group 44; Vehicle alignment; Vehicle
alignment specifications
Стр. 80из 129 On Board Diagnostic (OBD), performing

Downloaded from www.Manualslib.com manuals search engine 01-239


Table for ABS/EDL/ASR/ESP, coding
Note:

The control module must be coded with the same code number as the previous control
module installed in the vehicle
4MOTION vehicles
With control unit identification number 1C0 907 379 F/H/N
Engine
Engine codes
Brake type1)
Heavy duty
package
2) Coding
2.8 ltr. AQP; AUE; BDE FN 3 without 23046
with 23174
1) Overview of types of brakes (PR No.) Page 01-234 .
1) Overview of types of vehicle.
Repair Manual, Suspension, Wheels, Steering, Repair Group 44; Vehicle alignment; Vehicle
alignment specifications
Стр. 81из 129 On Board Diagnostic (OBD), performing

Downloaded from www.Manualslib.com manuals search engine 01-241



- Connect V.A.G 1551 scan tool and select
(address word 03) brake electronics control
module with ignition switched on; Page 01
-
163 .
Rapid data transfer HELP
Select function XX Indicated on display:
- Press keys 0 and 8. (The function "Read
measured value block" is initiated with 08.)
Rapid data transfer Q
08 - Read measured value block Indicated on display:
- Confirm entry with key Q.
Read measured value block
Enter displa
y group number XXX
Indicated on display:
- Enter display group number. List of selectable
display group numbers Page 01
-242 .
Стр. 83из 129 On Board Diagnostic (OBD), performing

Downloaded from www.Manualslib.com manuals search engine 01-242


Overview of selectable display group numbers
Display group number
Display zone
Designation
001 1 Wheel speed at left front wheel sensor (km/h)
2 Wheel speed at right front wheel sensor (km/h)
3 Wheel speed at left rear speed sensor (km/h)
4 Wheel speed at right rear speed sensor (km/h)
002 1 Wheel speed at left front speed sensor (km/h)
2 Wheel speed at right front wheel sensor (km/h)
3 Wheel speed at left rear speed sensor (km/h)
4 Wheel speed at right rear speed sensor (km/h)
003 1 Brake light switch
2 Brake system warning light
3 ABS warning light
4 ASR/ESP warning light
Стр. 84из 129 On Board Diagnostic (OBD), performing