key VOLKSWAGEN BORA 1998 User Guide
[x] Cancel search | Manufacturer: VOLKSWAGEN, Model Year: 1998, Model line: BORA, Model: VOLKSWAGEN BORA 1998Pages: 339, PDF Size: 2.35 MB
Page 62 of 339
Downloaded from www.Manualslib.com manuals search engine 01-59
Rapid data transfer HELP
Select function XX Indicated on display
- Input 07 for "Code control module" and
confirm with Q key.
Rapid data transfer Q
07 - Code control module Indicated on display
- Confirm input with Q key.
Coding control module Q
Enter code number XXXXX
(0-32000)
Indicated on display
- Enter relevant code number for this
vehicle and confirm with Q key.
Coding variations Page 01
-60 .
1J0 907 379 D ABS 20 IE CAN 0001
Coding 03604 WSC 00000
On the display the control module
identification and coding are displayed,
e.g.:
Стр. 39из 81 ABS ITT Mk 20 IE On Board Diagnostic (OBD) program
Page 66 of 339
Downloaded from www.Manualslib.com manuals search engine 01-63
- Connect V.A.G 1551 Scan Tool and select
address word 03 for"Brake electronics" with
ignition switched on; Page 01
-23
Rapid data transfer HELP
Select function XX Indicated on display
- Press keys 0 and 8 to select function "Read
measured value block".
Rapid data transfer Q
08 - Read measured value block Indicated on display
- Confirm entry with key Q.
Read measured value block
Enter dis
play group number XXX
Indicated on display
- Enter display group number List of selectable
display group numbers, Page 01
-64 .
Стр. 43из 81 ABS ITT Mk 20 IE On Board Diagnostic (OBD) program
Page 69 of 339
Downloaded from www.Manualslib.com manuals search engine 01-66
Test sequence and test tables with
measured values
Checking speed sensor allocation
Display group number 001
- Press keys 0, 0 and 1.
- Confirm entry with key Q.
Read measured value block
1
1 2 3 4
There are always 4 display zones -arrows-
in the measured value block. Decoding the
individual values in display zones 1 to 4 can
be read from the following tables.
Read measured value block 1
0 km/h 0 km/h 0 km/h 0 km/h
Indicated on display: (vehicle stationary)
Press C key for the next display group
number entry.
If the key is pressed, keys 0 and 8 for
work sequence "Read measured value
block" must be pressed again afterwards to
regain entry.
Стр. 46из 81 ABS ITT Mk 20 IE On Board Diagnostic (OBD) program
Page 71 of 339
Downloaded from www.Manualslib.com manuals search engine 01-68
Checking speed sensor
Display group number 002
- Press keys 0, 0 and 2.
- Confirm entry with key Q.
Read measured value block
2
1 2 3 4
There are always 4 display zones -arrows-
in the measured value block. Decoding the
individual values in display zones 1 to 4 can
be read from the following tables.
Read measured value block 2
255 km/h 255 km/h 255 km/h 255 km/h
Indicated on display: (Vehicle stationary)
Press C key for the next display group
number entry.
If the key is pressed, keys 0 and 8 for
work sequence "Read measured value
block" must be pressed again afterwards to
regain entry.
Стр. 48из 81 ABS ITT Mk 20 IE On Board Diagnostic (OBD) program
Page 73 of 339
Downloaded from www.Manualslib.com manuals search engine 01-70
Checking brake light switch for ABS and
ABS/EDL function
Display group number 003
- Press keys 0, 0 and 3
- Confirm entry with key Q.
Read measured value block
3
1 2 3 4
There are always 4 display zones -arrows-
in the measured value block. Decoding the
individual values in display zones 1 to 4 can
be read from the following tables.
Read measured value block 3
0
Indicated on display
Press C key for the next display group
number entry.
If the key is pressed, keys 0 and 8 for
work sequence "Read measured value
block" must be pressed again afterwards to
regain entry.
Стр. 50из 81 ABS ITT Mk 20 IE On Board Diagnostic (OBD) program
Page 75 of 339
Downloaded from www.Manualslib.com manuals search engine 01-72
Checking data bus wiring
Display group number 125
- Press keys 1, 2 and 5
- Confirm entry with key Q.
Read measured value block
125
1 2 3 4
There are always 4 display zones -arrows-
in the measured value block. Decoding the
individual values in display zones 1 to 4 can
be read from the following tables.
Read measured value block
125
Engine 1 4WD 1 Gear. 1
Indicated on display: (vehicle stationary)
Press C key for the next display group
number entry.
If the key is pressed, keys 0 and 8 for
work sequence "Read measured value
block" must be pressed again afterwards to
regain entry.
Стр. 52из 81 ABS ITT Mk 20 IE On Board Diagnostic (OBD) program
Page 77 of 339
Downloaded from www.Manualslib.com manuals search engine 01-74
Output Diagnostic Test Mode (DTM)
Note:
All functions which could previously be
performed with V.A.G 1551 can also be
performed with the tester VAS 5051.
The pump motor and the correct functioning of
the hydraulic circuits (allocation of brake lines to
wheel cylinders and function of valves) can be
checked via the output DTM for interchange or
leaks.
The vehicle must be raised until all wheels are
free to turn. (2nd mechanic required to rotate
wheels)
The -C- key can be used to exit the test
sequence at any time.
After depressing the brake pedal several times
the vacuum in the brake booster will be
exhausted. Therefore more pressure must be
applied to the brake pedal in order to attain the
same fluid pressure in brake system, as that
attained with vacuum.
When vacuum in brake booster is exhausted
wheels may not lock; start engine and build-up
vacuum in brake booster.
Стр. 54из 81 ABS ITT Mk 20 IE On Board Diagnostic (OBD) program
Page 79 of 339
Downloaded from www.Manualslib.com manuals search engine 01-76
- Connect V.A.G 1551 Scan Tool.
- Switch ignition on.
- Press key -1- for "Rapid data transfer" operating
mode.
- Select brake electronics (address word 03);
Page 01
-23
Rapid data transfer Q
03 - Brake electronics Indicated on display
Note:
During the next work steps the ABS warning light -
K47- flashes. - Confirm entry with key Q.
- Read off control module version in V.A.G 1551
display.
-
Press key.
Стр. 56из 81 ABS ITT Mk 20 IE On Board Diagnostic (OBD) program
Page 80 of 339
Downloaded from www.Manualslib.com manuals search engine 01-77
Rapid data transfer HELP
Select function XX Indicated on display
- Press keys 0 and 3
Rapid data transfer Q
03 - Out
put Diagnostic Test Mode
Indicated on display
- Confirm entry with key Q.
ABS hydraulic pump -V64- must run.
Output Diagnostic Test Mode
-
ABS hydraulic pump - V64
Indicated on display
-
Press key.
Output Diagnostic Test Mode
-
Operate brakes
Indicated on display
- Operate brake pedal.
-
Press key.
Output Diagnostic Test Mode
-
IFL: 0V OFL: 0V Wheel FL locked
Indicated on display
Note:
If the wheel does not lock, there is a
possibility that there is a malfunction in the
mechanical/hydraulic part of the brake
system. - Indicate to 2nd mechanic which wheel
requires turning by hand.
Стр. 57из 81 ABS ITT Mk 20 IE On Board Diagnostic (OBD) program
Page 81 of 339
Downloaded from www.Manualslib.com manuals search engine 01-78
-
Press key.
Output Diagnostic Test Mode
-
IFL: VBAT OFL: 0V Wheel FL locked
Indicated on display
If the brake pedal gives, there is a
malfunction in the hydraulic unit. In this
case the hydraulic unit must be replaced.
Repair Manual, Brake System, Repair
Group 45; Hydraulic unit, brake
booster/brake master cylinder - Assembly
overview; Removing and installing control
module and hydraulic unit -
Press key.
ABS hydraulic pump -V64- must run.
Brake pedal must not give.
Output Diagnostic Test Mode
-
IFL: VBAT OFL: VBAT Wheel FL free
Indicated on display
Note:
If the wheel locks there is a possibility that
the brake lines to the wheel
calipers/cylinders have been interchanged. - Indicate to 2nd mechanic which wheel
requires turning by hand.
Стр. 58из 81 ABS ITT Mk 20 IE On Board Diagnostic (OBD) program