Page 24 VOLKSWAGEN GOLF 2009 Owners Manual

Please carry out each step only in the order specified:
169 Low beam head-High beam head-Parking lights
the way to the left and it out w ith
the way
the rear. The right headlig ht assembly is th e
mirror image of the left headlig ht assembly.
in LED daytime your authori zed wagen dealer or an Authorized Volkswagen ice Facility for assistance. Changing the
Remove cover in wheel house liner. Fi
g. 171 Remove bulb in fog light.
on page
321.
2.
323

Please perform the activities
remove the cove r in the wheel house lining from (arrow) .
Release the connecto r
and
171 as far as it goes to the left and
the bulb holder into the headlight and turn as far as it goes to the right.
Attach the connector to the bulb holder The connecto r mus t latch
audibly .
Replace
the cover in the whee l house
F ig. 172 the rear hatch : Removing the bulb
ho lder.
Please first read and note the introductory information and heed the on page
in the order specified:
1 . Review and
the rear hatch
of the screwdriver from the vehicle tool kit 172
Release the latch to remove the bulb holder.
Replace the burned out light bulb with a new bulb
of the same type.
Replace the
bulb holder . The locking lug must latch audib ly .
Attach th e cover . The cover must latch
Do it yourself

Replacing
moving Locking lugs.
on page 320.
Please carry out each step only in the order fied .
Removing the
1. Review and follow the checklist 321.
2 .
17 4) and the trim forwa rd .
4. Squeeze the release of the connector 17 4 together in the direction of the arrows and the connector off.
5. Unsc rew the securing screw by hand 174
6 . remove th e taillight rearward from the body and place it on a clean, smooth surface.
7. To unlock the 175 to in direction of the arrow.
8. Remove the bulb holder from the taillight.
9. R eplace the burned out light bulb with a new of the same type.
Insert the holder into the The locking must latch audibly .
the
11.
174
13.
14 . Attach the connector 174 to the
49.
Due to different versions of the taillight, the location of the light might differ from the
r epresen tation in the illu strat ions . li ght bulbs . These bulbs can be re-
placed . Practical tips

Changing the
the rear bumper : license plate light. Fig. 177 License plate light: removing the bulb
holder .
P le a se
first read and note the introductory information and heed the on page
in the order s p ecified :
17 6.
3 .
177 ®and disconnec t th e connector.
5. Turn the holder in the direc tion indicated by the arrow 177 @.
6.
the bulb ho lder in the lice nse plate light and turn it co unterc lockw ise in th e direction ind i-
cated by the arrow 177 until it stops.
8. Connect the connector to the bulb holder .
9. the license plate light carefully into the opening in the bumper . Make sure the license
plate light is installed in the correct direction.
Press the license plate
cannot replace the in LED license plate lights. Contact your authorized Volks­
wagen dealer or an Author ized Volkswagen ice
Do it yourself

{continued)
the non-insulated parts of the
battery clamps to touch.
the jumper cable attached to the positive battery terminal to contact metal parts of the vehicle.
Using jumper cables
Fig . 17 8 Diagram for attaching the jumper cables:
Dead battery and booste r
on page 327.
The dead battery must be properly connected to
the vehicle's electr ical system .
Make ce
rtain tha t the vehicles are not touchi ng
each other. Otherwise , electric curr ent could flow
as soo n as the positive terminal
s(+) are connec t­
ed. Use longer jumper cables if necessary .
Th e clamps on the jumper cables must have good
con tac t to bare metal on
the battery termina ls.
the engine does not start, stop the process after seconds and repeat after about1 minute.
cle electrical system, read and heed the
Connecting jumper cable s improperly can
ca use a short circuit and do ex pen sive dama ge to the vehicle's electrical system .
Switch off the ignition in both vehicles 165.
necessary , open the battery cover in the
At tach one end of the red jumper cable to t he
po sitive terminal 178 of the dead tery : Battery
Attach the othe r end of the red ju mper cable to the positive terminal of the good battery
(booster battery):
Atta ch one end of the black jump er of the booste r battery: 178 .
Attach the other end of the black jumper to a bare meta l part of the vehicle with the dead battery. This part shou ld be connected
dire ctly to the eng ine blo ck.
Route the jumper cables so that they cannot
ge t ca ught in any moving parts in the engine com-
partment of e ith er vehic le.

Towing
this sectio n you 'll find informat ion about:
T owing on a comme rc ia l tow truc k . . . . . . . . . .
Tips on towing .......................... 33 1
Installing the front tow ing eye . . . . . . . . . . . . . . 332
Installing th e rear towing eye . . . . . . . . . . . . . . 333 Driving tips towing 333
Exterior views
295
WARNING
Never tow a vehicle without any electrical
power.
denly engage and you would not be able to steer of control the vehicle. trol of the vehicle, crash , and seriously injure yourself and others.
Towing on a
on page
To help avoid damaging th e vehicle , h ave it towed
o n ly by a professional towing company. Read and
heed the following
information:
General information
N ever let the vehic le be towed at speeds above
km).
Towing a vehicle changes the way it handles
and brakes . To help reduce the risk of an cident and serious personal injury, note the following:
ed:
-
will have to use considerably more
force to turn the steering wheel because
the power steering is not working.
stalling and removing the towing eye and the cover for the threaded hole behind the bumper.
Towing manual transmission vehicles
Release the parking brake .
the transm ission into Neutral (N).
necessary, the vehicle can also be towed with the rea r wheels off the grou nd
Towing automatic transmission vehicles
Release the parking brake.
the transm issio n into Neutral (N).
Tow the vehicle only with its fron t wheels off the
gro und

When not to tow your
there is in the tr ansmission be­
cause of damage to you r it must be moved
with the drive wheels off the ground . The vehicle
can only be towed if its ignition is switched on and
i ts electrica l system is operating. the following
situat ions, the vehicle cannot be towed at
the front and rear whee ls can not turn .
the vehic le battery is dead {because the elec­
troni c steering column lock engages and cannot be
r e leased).
you have to tow an automatic transmission
vehic le more than 30
first read and note the introduc­
on page
Towing eye; tow rope or tow bar
A towing eye is included in your vehic le 's tool kit. This can be inserted in a threaded hole in the front
bumper and used when your vehicl e is being tow­
ed by ano ther vehicle.
The tow rope should be flexib le enough to he lp
protect both vehicles from damage. Use a synthet­
ic fiber rope or similar rope .
Attach the tow rope or tow bar only
to the towing
eye in the vehic le
For the towed vehic le, note the following :
Put the transmission in Neu tral (N) .
Do not tow faster than 30 mph (50 km/h). The
drive rotates while the i
s being towe d with its rear wheels off the ground. This can damage the automatic transmission .
can
Do not tow more than 30 miles (50 km).
When a commerc ial towing truck is being used,
the must be towed with the front
wheels
transmiss ion fluid ha s out of the trans ­
mission.
the re is in the transmissio n be­
cause of damage to your vehicle, it must be moved
w ith the drive whee ls off the ground.
the front and rear whee ls cannot turn.
When the vehicle battery is dead , since the
steering may remain disabl ed, and it may not be
poss ib le to rele ase the electronic steering column
lock.
you have to tow an auto matic transmiss ion
veh icle mor e than 30 miles (50 km).
A veh icle can be towed only if the electronic steer ing column lock is r e leased. case of a
power system,
the engine may have to be jump-started in order to release the electronic steering column lock . Pract ical tip s 331

right front bumper : Remove cover.
first read and note the introduc­
on page
There is a threaded 180.
33 1.
Take the towing eye, the
Push on the cover at the bottom marking =>fig. 179 (arrow ) so that it pops out.
Remove the cover and it hang from the
b um per.
332 Do
F ig .
Screw the towing eye counterclockwise into
the threaded
Use the
When towing is to remove it.
Posit ion the of the cover in the open ­
ing in the bumper and
Push on the upper part of the cover the
upper i n to
m ake sure the towing eye is screwed the way into threaded s o that it is secure.

N
right rear bumper : Remove cover.
on page
for the towing eye
in the right rear bu mper 182 .
the rear towing eye
Take the tow ing eye , th e wrenc h, and the
screwdrive r out of the vehicle gage compartment
Push on the cover at the bottom marking 181 (arrow) so that it pops out.
Remove the cover and let it hang from the
bumper .
the towing eye counterclockwise int o the th readed as far as it go (arrow) 182 Use the lug wrench to turn and
t ighten th e towing eye.
Driving tips while towing
tory information and hee d the on page
Tow ing requires some experie nce , whe n
u sin g a tow rope. Both drivers must be familiar with
the techniques required for towing .
drivers should not try to tow a that is being towed.
Do not
in towing eye.
When towing is complete , unscrew the towing
eye clockwise to remove it.
Position the of the cover in the ing in the bumper and the
Aiways make sure the towing eye is screwed so that is secure. not, it out
your turns even if the eme rgency flashers are activated ,
as
i n the way. The em ergency flashers
go off as long as the turn signal is As soon as the turn re turns to its
Pr actica l tips

Federal Emissions Warranties
The Emissions Warranties set out on the following
pages are warran ties which the m anu facturer is re­
quired by l
aw to furnish to you at the time you take
delivery of your new
miles New Vehicle Limited Warranty.
The warranties required by fede ral laws apply to new Volkswagen vehicles imported and distributed
by Volkswage n of America, an operating unit of Volkswagen G roup of Amer ica,
new Volkswagen vehi­
cles imported and distributed by Volkswagen for
sale and registration in the State of Ca lifornia,
Connect icut, Maine, Maryland, New Je rsey,
for veh icles
eq uipp ed to meet California 's Partia l Ze ro Emis - sion
Vehicle (PZEV) emission requirements, as
ide ntified on the
Vehic le Emission Control
you have
any quest ions concerning the applicab ility o f each
warranty to your
Customer CARE
Ml 48326 1
Vo lkswagen of America , an operating unit of
Vo lkswage n Group of Amer ica, ( "Volkswa­the authorized United i mporte r of Volkswagen vehicles, warra nts to the origi nal re tai l
p urch aser or original lessee and any subsequent
purchase r or lessee that every model year Vo lkswagen import ed by Volkswagen:
appl icab le regula ­
t ions of the United Environmental Protection
Agency (EPA), a nd
free from defects in materi al and workman­
sh ip which causes the vehic le to fail to conform
wi th EPA regulations for 2 yea rs after the date of first use or delivery of the
mil es, whi cheve r occurs
fir st.
USA Warranty and Maintenance A
wa rranted part is any part
in a warranty re­
pa ir , wh ich aff ects any regulate d em iss io n fr om a
motor
o r engi ne which is subjec t to EPA
emission standards. The
cause the vehic le to fail to
confo rm w ith EPA regu lat ions:
Evaporative Emission Con trol Syste m: includ­
ing fuel tank, ca p,
inc lud ing man ifo lds, turbo ­
charge rs, catalytic converters, down pipes and par­
ticulate