clutch VOLKSWAGEN GOLF 2009 Owners Manual

Volkswagen Service Vehicles with Xenon
gas-discharge self-adjust to vehicle load
and do not need manual adjustment.
Special towing considerations
th e t railer has an overrun brake, apply the
br akes
Due to the combined towing weight including
the higher gross vehicle weight, the stopping
tance is longer.
Be fo re drivi ng especially on
The vehicle's center of grav ity and , in turn, the
Weight distribution is especially bad if the is emp ty and the trailer is loaded.
Depending on how steep the is an d the
backwards when you first start moving.
When starting off with a tra iler on a
Depress and hold the brake pedal and depress
and hold the clutch (manu al transmission).
171, Shifting .
Unlock the parking brake a nd gently release it
whi le holding the unlock button. At the same time,
release the brake pedal and
depress the
accelerator and, for manual transmissions , let out
the clutch
you can feel the car moving ward . applicable, follow the instruct ions for the Hold feat ure
Do not release the parking brake lever until the
engine starts to move the vehicle forward. your
vehicle has an automatic tr ansmission , you can
so depress and hold the brake peda l for added
b raking and then Jet up on the brake pedal when
you feel that the to move forward .
Drive ahead slowly.
hicle contro l and serious per sonal injury.
dles and increases the distance it needs to stop safely .
Always adapt your sp ee d and driving to th e heavier loa d and the weight distribution in the vehicle. Tak e road , weather , traffic, and visibility conditions into account as well .
Always avoid sudde n maneuv ers and ha rd braking.
atin g.
som e areas
s p ee d for vehicles towing trailers are
lower than for vehicles without trailers. T ra n spo rting

Manual transmission: Gearshift lever
Fig. Gea rshift pattern of a 6-speed manual
t r ansmission .
Please first read and note the introduc­tory information and heed the o n page 171.
The positions of the
individua l gea rs are shown on
t he gearshift leve r
Depress the clutch pedal the way and hold.
Move the gearshift lever into the desired
Release the clutc h pedal to engage the gear.
T he c
lutch pedal must be
shift to the reverse gear when the vehic le
is not moving.
Depr ess the and hold
Move the gearshift lever to neutral and press
down .
Move the shift lever to the left and then push
f orward into the reverse gear position @.
Release the clut ch pedal to engage the gear .
Downshifting
You should always downshift gear by gear when
driving , meaning always in to the next lowes t gear. Do not downshift when the engine rpm (revo lutions
At fast speeds or high
engine rpms, skipping over one or more gears
when downshifting can cause damage to the clutch
and transmission, even
if a gear is not engaged
... -
Down shifting to a lowe r gear incorrectly can result in loss of vehicle control and can
cause accidents and serious personal inju-ries.
When the engine is running and a gear is en-
gaged, the vehic le will start to move as soon
as the c lutch pedal is released, even when
th e parking brake is applied. This a lso ap-plies when the parking brake is engaged.
Never shift into reverse when the vehicle
is moving.
Shifting
down to a gear that is too low when driving at fa st spee ds or high engine rpms can
cause extensive damage to the clutch and
transmission. That is true even if the clutch pedal is pressed so that the clutch is not
To help prevent damage and premature wear:
Do not rest your hand on the gearshift leve r
while driving. time, the pressure ca use premature wear in the transmission.
Make sure that the vehicle has come to a
comple te stop before shifti ng into reve rse.
Do not hold the vehicle on a hill using

Flashes Possible ca use Proper response
Electronic steering column lock malfunction . The ignition cannot be switched on. The vehicle
system stiff.
column not locked I unlocked .
When the
ignition is switched severa l warni ng
a n d indicator lights come on briefly for a function
check . T hey go out after a few seconds.
Failure to heed warning lights and instrument cluster text messages can ca use the vehicle to break down sion and serious personal injury.
tory Information and heed the on page 192.
To
tomatic transmiss ion vehicle.
press the starter button briefly twice in a row
without depressing the brake or clutch pedal.
D o
not drive any farther if the steering column
remains locked after you switch on the ignition.
Get professional assistance.
Always stop the vehicle as soon as it is safe to do so.
F a
ilure to heed warning lights or text can resu lt vehicle damage .
Engaging the steering
co lumn lock
Park ing the vehicle
ing column lock
Turn the steering wheel
slightly to take pressure
off the steering column
l ock .
to the ignition switch.
Hold the steer ing wheel
i n this position and turn
the ignition switch.
Power steering automatically adjusts to driving
speed , steering torque, and the steering angle
of the wheels . Power steering works only when the
engine is running .
it
Sta rting, sh ift ing , park ing

conditions are
3. A manual transm iss ion vehic le must be in 1st
gear (1 ) i f headed up a or in Reverse (R ) if backing up a you must hold the clut ch down
and the foot brake must be depressed to keep
the vehic
le from moving.
' Rel
ease
the brake as you let the clutch out and gently depress the accelerator.
any requi rement lis ted in the tab le above is
no longer met (see 196 , ed automatically when the following conditions are all met at the same time.).
gine malfunctions .
Automatic transmission vehicles: the mission i s in Neutral (N).
Automatic transmission vehicles:
and
the foot brake must be depressed to keep the
vehic le from moving .
Relea
se the brake as you gently depress the accelerator.
cle in start situations (for example, if the surface icy or slippery).
down the