display VOLKSWAGEN ID.4 2020 Owner´s Manual

Front passenger side
Fig. 8
Front passenger side (left-hand drive ve-
hicles): overview of dash panel (mirrored for
right-hand drive vehicles). Fig. 9
With open front passenger door (left-
hand driv e vehicles): key-operated switch in the
dash panel (mirrored for right-hand drive vehi-
cles). 1
Vent ........................................................................\
......................................................... 1202
Glove box with button for opening 3
Location of front passenger front airbag in the dash panel ..................................... 474
Key switch for switching off the front passenger front airbag ................................ 53Controls and displays in the roof
Symbol
Meaning Touch panels for interior and reading lights

The ID. Cockpit is a digital instrument
cluster with a high-resolution LC colour
display. By selecting diff
erent informa-
tion profiles, displays from the driver as-
sist systems and other displays can be
shown in addition to the digital speed-
ometer. The term “digital instrument
cluster” is used below for the ID. Cock-
pit.
Views in the display area
The digital instrument cluster can display the
following views

The displayed value is calculated and updated
depending on the driving style and ambient
conditions. The range can theref
ore also vary
even for a fully charged high-voltage battery.
Reserve range Fig. 12
In the digital instrument cluster: range
and reserv
e capacity display.1
Charge level and range. 2
Reserve capacity warning level 1 and
range. 3
Reserve capacity warning level 2 and
range. When the red reserve range of the high-volt-
age battery is reached, the symbol
is dis-
played together with a colour percentage v
al-
ue

The power display shows the current
perf
ormance capability of the electric
drive and the current drive power.
Display concept
Using the bar divided in the middle, the pow-
er display continuously shows the availability
of brake energy recuperation

tional sign in the head-up display and in the
instrument cluster.
Displays
In addition to speed limits and o
vertaking re-
strictions, Dynamic Road Sign Display also
detects the road sign which indicates that all
restrictions have been lifted on motorways
and main roads in Germany. In all other coun-
tries in which the system is operated, the
current speed limit is displayed instead.
The road signs detected by the Dynamic Road
Sign Display system are displayed on the in-
strument cluster. Road signs may also be dis-
played in the Infotainment system, depend-
ing on the system installed in the vehicle.
With some equipment levels, a display is also
shown on the Head-up Display.
The system is in the initial-
isation phase. OR: the camera has not
detected any regulatory or warning
signs.
System fault. Go to
a qualified workshop.
Fault in the Dy-
namic Road Sign Display system
speed warning. Go to a qualified
workshop.
The
windscreen is dirty in the area of the
camera or the camera view is im-
paired due to the weather conditions.
Clean the windscreen.
No data
transmission from the Infotainment
system. Check whether valid map da-
ta is loaded in the Infotainment sys-
tem. OR: the vehicle is located in an
area that is not covered by the map
stored in the Infotainment system.
Dynamic Road Sign Display is
not supported in the country in which
you are currently travelling.
No road signs available.
Error: Dynamic Road Sign Display
Speed warning currently not available.
Dynamic Road Sign Display: Clean the windscreen!
Dynamic Road Sign Display is currently restricted.
No data available.
Display of road signs Fig. 16
In the instrument cluster display: e
xam-
ple of recognised speed limits with generic addi-
tional sign.
After validation and evaluation of the infor-
mation from the camera, the Infotainment
system and the current vehicle data, the Dy-
namic Road Sign Display shows up to two
valid road signs and one generic additional
sign

(0 mph), 5 km/h (3 mph) or 10 km/h (5 mph)
abo
ve the permitted speed.
Trailer mode
In vehicles with a factory-fitted towing
bracket and a trailer with an electrical con-
nection to the vehicle, the display of road
signs that may apply to the vehicle when
towing a trailer, e.g. applicable speed limits
and no-overtaking signs, can be activated or
deactivated in the vehicle settings in the In-
fotainment system

Eco assistance
Please refer to at the start of the chap-
ter on page 18. Fig. 17
Eco Assistance display (illustration).
The Eco Assistance function supports you
during def
ensive and energy-saving driving
with notifications in the digital instrument
cluster that appear according to the situation

Service interval display
Please refer to at the start of the chap-
ter on page 18.
Service e
vents are displayed on the instru-
ment cluster and in the Infotainment system.
Service notification
When an inspection is due, a service an-
nouncement will appear on the instrument
cluster display when the ignition is switched
on.
The number of kilometres or amount of time
shown correspond to the maximum number
of kilometres or maximum time that can still
be driven before the next inspection.
Service event
For a scheduled inspection, an acoustic signal
will be given when the ignition is switched on
and the spanner symbol will be displayed
f

or several seconds on the instrument cluster
display. One of the following displays will al-
so appear:

Vehicle settings menu
Please refer to at the start of the chap-
ter on page 30. You can switch individual functions and
systems on and off and adjust the set-
tings in the v
ehicle settings of the Info-
tainment system.
Opening the
Vehicle settings menu
1. Switch on the ignition.
2. Switch on Infotainment system if neces- sary.
3. Touch the Vehicle function button.
4.

Touch the corresponding function but-
tons from
Interior or Exterior to open addi-
tional submenus in the Vehicle menu or to
adjust settings in the menu options.
5. Open the desired menu and make the desired setting.
The activated functions are highlighted
in colour. Exit menu
Please refer to at the start of the chap-
ter on page 30. In the Exit menu, you can adjust settings
f

or some functions before you leave the
vehicle. When you switch off the igni-
tion, the Exit menu will be displayed in
the Infotainment system.
The displayed options depend on the vehicle
equipment and may be available only under
certain conditions. The adjustable functions
may include the following, for example:

Brightness
1.
Touch the Brightness function button in
the control centre.
2.

Adjust the brightness by means of the
touch slider.
OR:
1. Touch the Vehicle function button on the
Inf

otainment system.
2. Select display content for the
Interior.
Then touch the ID. Light function button.
3.
Adjust the brightness by means of the
touch slider.
4. Touch the
HOME button to return to
the pre
vious menu.
Settings in the Infotainment system
1. Touch the Vehicle function button.
2.

Select display content for the
Interior.
Then touch the ID. Light function button.
3.
Set the functions for ID. Light as desired.
The activated functions are highlighted
in colour.
Certain ID. Light functions can be optionally
activated or deactivated in the vehicle set-
tings in the Infotainment system.