locking VOLKSWAGEN PASSAT 1996 B3, B4 / 3.G Service Service Manual

Downloaded from www.Manualslib.com manuals search engine 46-28

4 - Brake hose bracket
5 - Hex socket head bolt,
65 Nm (48 ft lb)
6 - Self-locking bolt, 35
Nm (26 ft lb) Always replace When loosening and
tightening, counter-
hold on guide pin
7 - Guide pin
8 - Protective cap
9 - Pad retaining springs Always replace when
changing pads
10 - Backing plate ring Distance between ring
collar and backing
plate: 9.5 mm Page 2 of 10Rear wheel brakes, servicing (disc brakes)12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.46.5

Downloaded from www.Manualslib.com manuals search engine 46-30

14 - Outer wheel bearing
15 - Hex nut Adjusting wheel
bearing play Using a screwdriver it
must be possible to
move the thrust
washer by finger
pressure (without
leverage) Page 42-20 Secure with locking
ring and new cotter pin 16 - Cotter pin Always replace 17 - Grease cap Removing and
installing Page 42-29 18 - Lock ring
19 - Thrust washer
20 - Wheel bolt, 110 Nm (81
ft lb) Page 4 of 10Rear wheel brakes, servicing (disc brakes)12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.46.5

Downloaded from www.Manualslib.com manuals search engine 46-35

- Secure brake caliper housing with new self-
locking bolts. Note: - Attach parking brake cable (arrow) to brake caliper housing. After each brake pad change firmly depress brake
pedal several times with vehicle stationary, so
that the brake pads are properly seated in their
normal operating position. After changing brake pads check brake fluid level. Page 9 of 10Rear wheel brakes, servicing (disc brakes)12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.46.5

Downloaded from www.Manualslib.com manuals search engine 46-41

Brake pedal/brake servo,
removing and installing
CAUTION!
The brake pedal travel must
not be restricted by
additional floor coverings.
Note:
Grease all mountings before
installing with G 000 602
grease.
1 - Securing clip Ensure securely
seated
2 - Pin
3 - Brake servo push rod
clevis
4 - Self-locking hex nut, 20 Nm (15 ft lb)
5 - Brake pedal pivot pin Page 5 of 9Parking brake lever assembly overview12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.46.6

Downloaded from www.Manualslib.com manuals search engine 47-1

Assembly
overview: brake
master
cylinder/brake
servo
Note:
Brake master cylinders and
brake servos from different
manufacturers are installed.
Complete master cylinders and
brake servos can be replaced
independently of each other.
1 - Seal For brake servo 2 - Self-locking hex nut, 20 Nm (15 ft lb)
3 - Mounting bracket
4 - Mounting bracket For brake servo 5 - Seal Page 1 of 4Assembly overview: brake master cylinder/brake servo12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.47.1

Downloaded from www.Manualslib.com manuals search engine 47-3

7 - Sealing ring Always replace 8 - Self-locking hex nut, 20 Nm (15 ft lb)
9 - Brake master cylinder Cannot be repaired. If
faulty, replace
complete.
10 - Sealing plug Moisten with brake
fluid and press into
reservoir
11 - Seal Page 3 of 4Assembly overview: brake master cylinder/brake servo12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.47.1

Downloaded from www.Manualslib.com manuals search engine 47-5

Girling front brake
caliper, servicing
Note: When repairing install all
parts supplied in repair kit. Apply thin coat of brake
cylinder paste to brake
cylinders, pistons and
sea/s.
1 - Protective seal
2 - Bleed valve Apply thin coat of brake cylinder paste to threads before
screwing in
3 - Brake caliper housing
4 - Self-locking hex bolt,
35 Nm (26 ft lb) Always replace When loosening and
tightening counter-hold on guide pin Page 1 of 5Girling front brake caliper, servicing12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.47.2

Downloaded from www.Manualslib.com manuals search engine 47-15

Rear brake caliper,
servicing
Note: Apply thin coat of brake
cylinder paste to brake
cylinder pistons and seal. When repairing install all
parts supplied in repair kit. New brake calipers are
filled with brake fluid and
are pre-bled. When repairing it is
essential to pre-bleed the
brake calipers (without
brake pads) before
installing in the vehicle
Page 47-21 1 - Self-locking bolts, 35
Nm (26 ft lb) Always replace When loosening and
tightening counter-hold on guide pin Page 1 of 8Rear brake caliper, servicing12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.47.4

Downloaded from www.Manualslib.com manuals search engine 48-1


Steering

Assembly overview: steering column,
column tube, steering wheel and airbag
steering wheel

Airbag system functional check and
interrogating Diagnostic Trouble Code (DTC)
Memory.
Repair Manual, Body Exterior, Interior, Repair Group 68; General body repairs
Safety precautions when working on airbag
Repair Manual, Body Exterior, Interior, Repair Group 68, General body repairs
Note:
All parts marked with a "1)
" can be pre-
assembled outside of the vehicle
Pre-assembling steering column Page 48-6 Always replace self-locking nuts and bolts. Welding and straightening work on steering
components is not permitted. Page 1 of 99Steering12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.48.1

Downloaded from www.Manualslib.com manuals search engine 48-12

8 - Clamping sleeve
9 - Mounting bracket Before assembling,
coat side sliding
surfaces with MoS
2
paste
10 - Bolt with left-hand
thread Tighten to 22 Nm (16 ft lb), After tightening install
locking plate
11 - Locking plate
12 - Locking plate nut, 8
Nm (70 in. Ib) Self-locking Always replace 13 - Washer
14 - Shear bolt Tighten until head
shears off Page 12 of 99Steering12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.48.1