brake light VOLKSWAGEN TRANSPORTER 1992 T4 / 4.G Owners Manual
[x] Cancel search | Manufacturer: VOLKSWAGEN, Model Year: 1992, Model line: TRANSPORTER, Model: VOLKSWAGEN TRANSPORTER 1992 T4 / 4.GPages: 164, PDF Size: 25 MB
Page 5 of 164
Downloaded from www.Manualslib.com manuals search engine
CONTENTS
DASHBOARD AND
CONTROLS
Layout
4
i\='-:ng
lamps 6
CONTROLS
AND
EQUIPMENT
•
e.s. Central locking system 7, 8
I:cs, Tailgate 9, 10
I'I
~g doors 11
..
-^ows, Mirrors 12, 13
Sea: belts 15 5re:y for children 18
-ead restraints 19
Seats
20 _:ariing/sleeping surface 26
__ggage
compartment cover 27 __cgage compartment/load surface ... 28
-edals, Brakes 29 Vanual gearbox 31
--tomatic gearbox 32
gnition
lock 36
Starting / Stopping the engine .... 37, 38 "struments 40
.'.
arning lamps 47
Switches 50
~yn signal and dip lever 52
3'uise
control system 53 .'.'indscreen wiper 54
-eating and ventilation 55
Air
conditioner 57
Recirculating air switch 61
Auxiliary heater 63
Additional
water heater 67
Sun roof, Sliding/tilting roof 70, 71
nterior lights, Sun visors 72, 73
Ashtray, Cigarette lighter 73
-oof
rack 75
DRIVING
TIPS
The first 1500 km - and afterwards ... 76 Driving safely 78
Driving economically and
ecologically
79
Trailer towing 81
GENERAL
MAINTENANCE
Filling the tank, Fuel 85, 86
Care of car, Maintenance 88, 93 Bonnet, Engine compartment 94, 95
Engine oil, Gearbox oil 96, 99
Air
cleaner 100 Power assisted steering 100
Cooling
system 101
Brake fluid 104
Battery 106
Windscreen washer system 108
Wheels 110
Arduous operating conditions 115
Winter driving 116
Accessories, modifications and
renewal of parts 117
Mobile
telephones and two way
radios 117
DO-IT-YOURSELF
First
aid kit, Warning triangle 118
Vehicle tools 118 Spare wheel/changing wheel ... 119, 120
Fuses
122
Changing
bulbs 124
Adjusting/masking headlights .. 128,129
Headlights 129
Installing radio 129
Emergency starting 130
Tow starting/towing 132
Lifting vehicle 134
TECHNICAL
DESCRIPTION
Engine 136
Emission control system 137
Activated charcoal filter '38 Power flow '39
Steering, Axles 139 Brakes, Body -139,
1
AC
Environment compatibility 140
TECHNICAL
DATA
Engine 141
Performance 142
Fuel consumption 143
Spark plugs 145
V-belts 145
Wheels,
Tyre
pressures 146, 147
Weights,
Trailer weights 148, 151 Dimensions 152
Capacities 153
Vehicle identification data 154
SPECIAL
INFORMATION
Adjusting the brake pressure regulator 155
ALPHABETICAL
INDEX
Alphabetical index 156
CHECKS
WHEN
FILLING
THE TANK
Overview 160
3
www.vwT4camper.info - a useful website for owners and enthusiasts of VW T4 Transporter Campervans
Page 8 of 164
Downloaded from www.Manualslib.com manuals search engine
DASHBOARD
AND
CONTROLS
Warning lamps
Symbol Page Symbol
Page
Coolant temperature/
Coolant level
47
A Emergency light system
51
Engine oil pressure f^i
47
m Rear
window
heating
51
ID
Headlight
high
beams
48
to Fog lights
rear fog light 51
Turn
signals
49
Notes
((D)
Brake
system l^i
48
•
If one of the lamps marked
with
comes on when driving
stop and switch engine off. Details can be found on the pages
given
B Some of the lamps shown here are
only
on certain models or are optional extras.
£3
Alternator
49 •
If one of the lamps marked
with
comes on when driving
stop and switch engine off. Details can be found on the pages
given
B Some of the lamps shown here are
only
on certain models or are optional extras.
m Glow plugs - Diesel
49
(©)
Anti-locking brake system (ABS)
49
Trailer turn signals
49
6
www.vwT4camper.info - a useful website for owners and enthusiasts of VW T4 Transporter Campervans
Page 31 of 164
Downloaded from www.Manualslib.com manuals search engine
CONTROLS AND EQUIPMENT
3edals
• e ~ cvement of the pedals must not be re-
:: :~is reason, do not put articles in the
—•".•.ell which could roll or slide underneath
—-E-
zedals.
•Vr^-d the pedal area there should not be •r. -;otmatsorotheradditionalfloorcover- •: -aterials:
• In the
case
of defects on the brake sys-
r~
3 greater pedal travel may be
necess-
• : should always be possible to depress
~3
: _tch and accelerator pedals fully.
• - pedals must be able to return, unhin-
z-z'^z.
to their rest positions,
""•e'efore, the only
foot
mats which may be
are those which leave the pedal area
::—oletely free and which are prevented . " slipping. Brakes
The following points are of particular import
ance
to the safe operation of the brakes.
• New brake linings must also be run in and do not have the optimum
friction
prop
erties during the
first
200 km. The slightly reduced braking effect can be compen
sated for by more pressure on the brake
pedal.
This also applies when new linings have been fitted.
• If the brake pedal travel increases suddenly, it may be
that
one of the two
brake circuits has failed. You can still drive
on to the next Volkswagen dealer but be prepared to use more pressure on the pedal
and allow for longer braking distances on
the way.
• The brake
fluid
level must be checked regularly-see page 105.
The brake warning lamp
will
come on to indi cate
that
the brake
fluid
level is too low (see
also
page 48).
• Brake lining wear depends to a large ex
tent
on the operating conditions and style of driving. On vehicles which are used mainly in
town
traffic
and stop/start conditions or
are driven hard it may be necessary to have
the thickness of the brake linings checked by a Volkswagen dealer in between the in
tervals given in the Service Schedule.
• Change down in good time when driving downhill, in orderto make use of the engine braking effect. This relieves strain on the
brake system. When the brakes are applied do not keep them on con::rjc_s , =" .
and release alternately.
• Under certain operating conditions, *c example after driving through water, a^e' heavy rain or after washing the vehicle the
braking effect may be retarded by wet, or in
winter iced-up brake discs and linings - the brakes must be dried out
first
by applying
the footbrake.
The
full
braking effect may also be delayed when vehicle has been driven for some time
on heavily salted roads
without
using the
brakes,
because the layer of salt on discs
and pads has to be removed
first.
Attention
If a
front
spoiler,
full
size
wheel
trims
etc., is
retrofitted,
it is necessary to
ensure
that
the
flow
of air to the
front
brakes
is not re
stricted
-
otherwise
the
brakes
can
overheat.
www.vwT4camper.info - a useful website for owners and enthusiasts of VW T4 Transporter Campervans
Page 32 of 164
Downloaded from www.Manualslib.com manuals search engine
CONTROLS AND EQUIPMENT
Brake servo Attention
The servo
is
operated
by
vacuum which
is
only generated when
en
gine
is
running.
For
this reason
the vehicle should
not be
allowed
to roll with
the
engine switched off.
When
the
brake servo
is not
working because,
for
example,
the vehicle
is
being towed
or be
cause
a
defect
has
occurred
on
the brake servo itself,
the
brake pedal must
be
pressed consider
ably harder
to
compensate
for
the absence
of
servo assistance. Anti-locking brake system
*
The ABS plays a major part in increasing the
active safety of the vehicle. The big advan
tage when compared with a conventional brake system is that even when braking
hard on a slippery road surface the best
possible steerability is retained for the road
condition because the wheels do not lock.
However, one must not expect the ABS sys
tem to shorten the braking distance in all conditions. When driving on gravel or on
fresh snow covering a slippery surface, i.e.
when one should be driving very carefully in
any case, the stopping distance may even be slightly longer.
How
the ABS
system works
When the turning speed of a wheel reaches
a level which is too lowforthe vehicle speed
and it tends to lock, the brake pressure to
this wheel is reduced. On the front axle the brake pressure is regulated for each wheel
individually, whereas on the rear axle, the
pressure is regulated for both wheels at the
same time. As a result the braking effect is
the same for both rear wheels and the driv ing stability is retained as far as possible.
This regulating process makes itself known by movement of the brake pedal and is ac
companied by noises. This is done deliber
ately as a warning to the driver that a wheel
or the wheels are in the locking range. So
that the ABS can regulate effectively in this range the brake pedal must remain de pressed - on no account should it be
pumped!
Attention However
the ABS
system cannot
overcome
the
physical limits.
This must
be
borne
in
mind par
ticularly
on
slippery
or wet
roads.
When
the ABS
comes into
the
control range
the
speed must
im
mediately
be
adapted
to the
road
and traffic conditions.
The in
creased amount
of
safety avail
able must
not
tempt
one
into tak ing risks.
If a defect occurs on the ABS it is indicated
by a warning lamp - see page 49.
www.vwT4camper.info - a useful website for owners and enthusiasts of VW T4 Transporter Campervans
Page 33 of 164
Downloaded from www.Manualslib.com manuals search engine
CONTROLS
AND EQUIPMENT
-andbrake
~: ;:dy the handbrake pull lever up
firmly.
Zr - s the
1
st gear or
with
automatic gear- :ne parking lock should also be en-
r'zz^z.
The handbrake should always be
ace
53 so
firmly
that
it is not possible to
zr .9 nadvertently
with
the handbrake on.
~T"
handbrake is applied
with
the ignition
• :_e brake warning lamp comes on.
~: "e ease handbrake, pull lever up slightly,
: r;s locking knob in and push lever
right
Manual
gearbox
Note
When driving you shot z ' z: est .: ~ E~ :
on the gear lever. The press^-e z~ .:„'-="
is
transmitted to the selectc ~z'-~ - ~T
gearbox and can cause pren-a:_"5 .-, ~z' z~
the forks.
Gear
gate
• All forward gears are baulk synchro
nised.
The synchronising hubs enable easy
noise-free selection of the forward gears.
• Only engage reverse gear when vehicle
is
stationary. When engine is running, de
press
clutch
fully
and
wait
a few seconds
before moving gear lever, to prevent grating
noises.
When reverse gear is engaged
with
ignition
on,
the reversing lights come on.
3'
www.vwT4camper.info - a useful website for owners and enthusiasts of VW T4 Transporter Campervans
Page 36 of 164
Downloaded from www.Manualslib.com manuals search engine
CONTROLS AND
EQUIPMENT
R -
Reverse
gear
The reverse gear should only be engaged
when the vehicle is stationary and
with
the engine idling. Before engaging the position
"R"
from the positions "P" or "N" the brake
pedal must be depressed and the lock
but
ton in the selector lever handle must also be
pressed.
The reversing lights come on then the
selec
tor lever is in the " R" position
with
the igni
tion
switched on.
IM -
Neutral
(idling
position)
To
move the lever out of neutral when
sta
tionary or at speeds below 5 km/h and
with
ignition switched on depress the brake
pedal and press the lock
button
in the
selec
tor lever handle.
D -
Normal
driving
position
The four forward gears are shifted up and down automatically depending upon
throttle
opening and programme selected.
Under
certain driving conditions it is advan
tageous to engage one of the following de
scribed
selector lever positions. 3 - Position for
hilly
regions
The 1st, 2nd and 3rd gears are shifted up and down depending upon engine load, road
speed
and programme selected. The 4th
gear
is not engaged. This increases the en
gine braking effect when the accelerator pedal is released.
This
selector position is recommended in situations where the gearbox alternates fre
quently between 3rd and 4th gears in the
"D"
position.
2 - Position for
steep
hills
This
selector lever position is suitable for long climbs and descents.
The 1st and 2nd gears are shifted up and down automatically depending on engine
load,
road speed and programme selected.
To
prevent unnecessary changing up 3rd
and 4th gears are not engaged. This
further
increases
the engine braking effect on
deceleration.
1 - Position for
very
steep
hills
This
selector lever position is recom mended for very steep climbs and de
scents.
To
engage this gear, the lock
button
in the
selector
lever handle must be pressed in.
The vehicle only moves in
1
st gear. The 2nd, 3rd and 4th gears are not engaged.
Maxi
mum possible engine braking effect is now
available.
The cruise control * cannot be used in
posi
tion
"1".
Note
When changing down manually the selector lever can be moved
into
the positions "3",
"2"
and "1", but the gearbox will not
change
down
until
it is no longer possible to
over-rev the engine.
Kick-down
device
The kick-down device gives maximum ac celeration. When the accelerator pedal is
pressed
right
down past the
full
throttle
position, depending on road speed and en
gine
speed,
the box changes down
into
a lower gear. The upshift
into
the next higher
gear
then takes place as soon as the maxi mum specified engine speed is reached.
34
www.vwT4camper.info - a useful website for owners and enthusiasts of VW T4 Transporter Campervans
Page 37 of 164
Downloaded from www.Manualslib.com manuals search engine
CONTROLS
AND EQUIPMENT
Notes on driving Starting
\
e
engine
can only be started when
selec-
pr
ever
is at
"N"
or
"P".
See
also
"Starting
Br:
re" on
page
37.
Selecting
a driving range When the vehicle is stationary and
the engine is running always de
press
the foot brake when selecting
i gear.
When the vehicle is stationary do
•ot depress the accelerator when
•electing a gear. f the lever is moved accidentally nto "IM" when driving, release ac
celerator and let the engine speed
trop to idling before selecting a for
ward
gear again.
•
Attention
•
When the engine is running it
is
necessary to hold the vehicle
with
the foot brake in all gears.
Because
with
an automatic gear
box the transfer of power is not
fully interrupted even at idling
speed
- and the vehicle tends to
"creep".
When the vehicle is stationary
and a gear is engaged, the
throttle
must not be opened inad
vertently
on any account (for in
stance
by hand from the engine
compartment). Otherwise the vehicle
will
move immediately -
even if the handbrake has been
fully applied.
Before working on the vehicle
with
the engine running, apply
the handbrake and put the selec
tor lever in "P".
Moving off
Select
driving
range
(R, D, 3, 2, 1).
Wait
until
the gearbox has
shifted
and the
power
flow
is made to the
driving
wheels
(light
selection
jerk
perceptible).
Then
one can accelerate.
Stopping
To
stop
vehicle
temporarily
such
as at traffic
lights,
it is only
necessary
to
apply
the
brakes.
It is not
necessary
to
move
selector
lever
to
"N".
The
engine
should
however
only
be running at idling
speed.
Parking
On
level
ground all you
need
do is
engage
the
parking
lock.
On a gradient the
hand
brake
should
be
applied
firmly first
and
then
the
parking
lock
engaged.
This
will
ensure
that the
locking
mechanism
is not too
heav
ily
loaded
and
makes
the
lock
easier
to
dis
engage.
Tow starting
On
vehicles
with
automatic
gearbox
the en
gine
cannot
be started by towing or
pushing
the
vehicle.
See
page
133.
When
the battery is flat, the
engine
can be
started
from the battery of another
vehicle
by
using
jumper
cables.
See
"Emergency
starting",
page
130.
Towing If the
vehicle
has to be towed at any time,
you
must
read
the instructions in the
sec
tion
"Towing/tow
starting on
page
132.
www.vwT4camper.info - a useful website for owners and enthusiasts of VW T4 Transporter Campervans
Page 39 of 164
Downloaded from www.Manualslib.com manuals search engine
CONTROLS AND EQUIPMENT
Starting
the
engine
General
hints
Attention
When
starting
the
engine
in con
fined
spaces
there
is a
danger
of poisoning.
• Before starting, move gear lever to neu- ml
(with
automatic gearbox, selector lever -
"P"
or "N" position) and apply handbrake
I 'mly.
• On vehicles
with
a manual gearbox de-
:"9ss
the clutch pedal when operating
=:arter
so
that
starter only has to
turn
en
gine.
• As soon as engine starts, release the gnition key so
that
starter can disengage.
• After starting a cold engine it may sound
_oisy
for a moment or two because the oil pressure has to build up in the hydraulic
tappets
first.
This is normal and no cause for
a
arm. Do not
warm
engine
up by run-
W>
ning
it
with
vehicle
stationary.
Drive
off
straight
away.
Do
not overrev or use
full
throttle
until the
engine has reached the normal operating
Temperature. • On vehicles
with
a
catalytic
con
verter
the
engine
must
not be
started
by
towing
the
vehicle
in ex
cess
of 50 m.
Otherwise
unburnt
fuel
can pass
into
the
converter
and
lead
to
damage.
•
Before
trying
to
start
engine
by
towing,
the
battery
from
another
ve
hicle
should be used for
starting
if
possible - see
page
130.
Petrol
engines
These
engines are equipped
with
a cer: ~-
jection system
that
automatically s^c; es the correct fuel/air mixture at ail anc e~:
temperatures.
When
engine is cold or at
operating
temperature
do not accelerate before or
during the starting procedure.
Applicable to all engines:
If the engine does not start at once, stop
using
the starter after 10
sees,
wait about
half a minute and then try again. If the engine still does not start, the electric
fuel pump fuse may have blown - see page
122.
When
the engine is
very
hot it may be
necessary
to accelerate slightly after the
engine has started.
37
www.vwT4camper.info - a useful website for owners and enthusiasts of VW T4 Transporter Campervans
Page 50 of 164
Downloaded from www.Manualslib.com manuals search engine
CONTROLS
AND EQUIPMENT
The
warning lamp flashes when ignition is
switched
on. the lamp must go out when
engine
has started.
If the warning lamp does not go out or
flashes
when driving - a buzzer also sounds
at engine speeds above 2000 rpm - stop,
switch
engine
off, check oil level and if
necessary,
add oil - see page 97.
If the lamp comes on although the oil level
is
in order, do not
drive
on. Do not even
run the engine at idling speed-call in expert
assistance.
Note
The oil pressure
warning
lamp
is not an oil
level
indicator.
The oil
level
should
therefore
be checked at reg
ular
intervals,
preferably
every
time
the
fuel
tank
is filled.
3 -
High
beams 10 4 - Turn signals
The
warning lampflashes when
turn
signals
are
switched on. If a
turn
signal fails, the
warning lamp flashes twice as fast. (Not
when towing a trailer).
Further
details are given on pages 49
and
52. 5 -
Brake
system «^
The
warning lamp comes on when
• the handbrake is on
• the brake fluid level is too low
The
ignition must be switched on.
Attention
If the
lamp
does not go out
when
handbrake
is released or comes
on
when
driving, the
fluid
level
in
the reservoir is too low. If an in crease in
pedal
free
travel
is no
ticed
at the same
time,
one of the
brake
circuits may
have
failed.
You can
drive
on
carefully
to the
nearest
Volkswagen
dealer
but
allow
for
higher
pedal
pressures and longer
braking
distances on
the way.
The
warning lamp comes on when high
beams
are on or when the headlight flasher
is
used.
48
www.vwT4camper.info - a useful website for owners and enthusiasts of VW T4 Transporter Campervans
Page 51 of 164
Downloaded from www.Manualslib.com manuals search engine
CONTROLS
AND
EQUIPMENT
6-Alternator
Q
~ne warning lamp comes on when the
igni-
I
on
is
switched on and must go out when
She
engine
is
started.
i the warning lamp comes on when driving,
stop,
switch
engine
off
and
check
the
alternator V-belt.
f the V-belt
is
broken or loose do not
drive
on with
a
vehicle which
has a 4 cylinder
engine
because the coolant pump
is
then
no
longer being driven. The V-belt must
be
tensioned
or
renewed.
ehicles with
a 5
cylinder engine
can
nor
mally
be
driven to the nearest Volkswagen
dealer when
the
V-belt
is
broken
or
loose oecause
the
coolant pump
is
driven separ
ately but then the battery will discharge
con
tinuously
and all
non-essential electrical consumers should
be
switched
off.
f the warning lamp comes on although
the
belt
is
not broken, one can normally drive on
to
the nearest Volkswagen dealer (all engine
types)
but the
battery will then discharge
continuously
- see
previous paragraph.
7-Glow
plugs
W
(Diesel engines only)
When
the engine
is cold
the warning lamp comes on when key
is
turned to Drive
posi
tion
(ignition on).
If
the warning lamp does not come
on,
there
is
a
defect in the glow plug system
-
call
in
expert assistance.
When
the
lamp goes out,
start
the engine
immediately
-
see page
38.
When
the
engine
is warm the
glow plug
lamp
does
not
come on -the engine can
be
started straight
away.
(®)
-
Anti-locking
Brake
System
(ABS)*
The operational readiness
of the
essential electrical components
of the ABS are
checked,
both before moving off and when
driving,
by an electronic monitoring system.
The warning lamp lights up when
the
igni
tion
is
switched on and
it
must go out again, at the latest, after the engine
has
started.
If
the warning lamp does not go out
or if it
comes on when driving the system
is
not
in
order.
The
vehicle can then only
be
braked
with
the
normal system
-
that
is
without
ABS-.The vehicle must be taken to a Volks
wagen Dealership
as
soon
as
possible.
Further details on ABS
is
given on page
30.
<]1i>
-
Trailer
turn
signals
The warning lamp
*
flashes when turn
sig
nals are switched on when towing
a
trailer.
If a
turn signal fails on the trailer or vehicle,
the warning lamp does not flash.
www.vwT4camper.info - a useful website for owners and enthusiasts of VW T4 Transporter Campervans