ABS VOLVO 700 1982 Service User Guide

70019401960 Specifications
Section
6 Suspension and steering
A
Toe-in
Meas ured as ang le
Toe -in ( ----------.-.--..---Spec ificat ion
Toe-in measurement (B-A) should be is 0.5±0.8 mm, mea ­
sured at C, see left.
Note: Camber must always be adjusted before Toe-in.
Toe-in tolerance
B 143 724
Measure Toe-in of unladen vehicle, according to above .
Apply sufficient load to obtain a lower link angle of 8°± 1 o .
Repeat Toe-in measurement and compare results.
Max. difference = 3' per wheel.
-c
143723
Group 61 Front wheel suspension
Tightening torque -85 Nm (63 ft. Ib)
95 Nm (70 ft Ib)
~~-.'"
~~======~~C r~M12: 85 Nm (63 ft Ib) ~:./ M 14: 140 Nm (102 ft Ib)
135 398
Nm ft Ib
Control arm to ball joint , nut .................................. . 60 44
Ball joint to spring strut + 1/4 turn .............. ................ . 30 22
Steering rod to steering arm .......................... (approx.) 60 44
Upper bearing -body ............................... (approx.) 40 29
Upper bearing -shock absorber, -1984 ............... (approx .) 150 111
1985- .... ........... (approx.) 70 50
Front crossmember to body. . . . . . . . . . . . . . . . . . . . . . . . . . (approx.) 95 70
Whee l nuts ......... .. ................................ .. ... . . 85 63
Front wheel hub -stub axle +450 angle -tightening
nut
(1988-models) ................................. . ....... . 100 74
156
143 722

70019401960 Specificatidns
Section
6 Rear wheel suspension
Tightening torques
Nm ftlb
Steering column 760 1988-............................. .. ... .
24 17
Steering wheel nut .
........ ................................. . 34
25
Steering column, universal joints
.............................. .
24 17
Steering gear -
cr 44 32
Steering
rod - outer ' ball joints ........................ (approx .) 70 52
Steering arm -outer
ball joints ........................ (approx.) 60 44
Group 65 Rear wheel suspens ion
Tightening torques (Multi-link)
Nm ft Ib
Link to lower , wheel beBring housing, nut +900~ngle tighten ..... . 50 37
Link to
lowen'rear axle crossmember, nut +900 angle tighten ..... . 50 37
Stud to body ................................................ .. . 70 51
Support arm mount lto body, nut +900 angle tighten ............. . 70 51
Support arm to body, bolt .................................... . 48 35
Support arm to mount, nut + 1200 angle
tighten ................. . 125 91
Support
arm to wheel bearing housing, bolt +90 angle tighten ... . 60 44
Link to upper wheel bearing housing, nut ...... ................ . 115 83
Link
to rear axle upper front crossmember, nut +600
angle tighten ............................................. . 70 51
Link to rear axle upper rear crossmember, nut .................. . 85 61
Track rod to wheel bearing housing, bolt ..................... .. . 85 61
Track rod to rear axle crossmember, nut ....................... . 70 51
Rear axle crossmember (front) to body, bolt +600 angle tighten .. . 70 51
Rear axle crossmember (rear) to body, bolt +600 angle tighten ... . 70 51
Final drive (front) to rear axle crossmember, bolt ................ . 160 116
Final drive (rear) to rear axle crossmember, bolt
................ . 160 116
Cable bracket to rear axle cross member, nut
................... . 24
17
Shock absorber to support arm, nut ........................... . 56 41
Shock absorber to body, bolt ................................. . 85 61
Wheel stud to shaft +600 angle tighten ........................ . 140 102
Wheel
bearing housing buffer, nut. ............................ . 24 17
Backplate to rear wheel bearing housing, bolt
.................. . 24
17
Brake caliper to wheel bearing housing, nut ..
.................. . 60 43
158

(
700194019fiO Specifications
Section
7 Springs, dampers and wheels
Section 7 Springs, shock absorbers, wheels
Group 77 Wheels, tires, hubs
Wheels
RIMS Aluminium
Lateral runout (A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Max. 0.8 mm
(0.032 in)
Radial runout (8). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Max. 0.6 mm
(0.024 in)
Tire pressures , cold kPa (ps i)*
~tttt*.
-e-US , I 132428
Tire size/model
7401760
4-door
Estate
780 - 1987
7601780 1988-
940/960
4-doo r
Estate
Front
190 (28)
190 (28)
210 (31)
200 (29)
1-3 occupants
Rear
190 (289)
210 (31)
190 (28)
190 (28)
190 (1.9)/940 190 (1.9)
200 (2.0)/960
190 (1.9) 210 (2.1)
Spare wheel "Special Spare"
155/R 15
18.14 350
(50)
280 (40) 350
(50)
280 (40) Front
210 (31)
210 (31)
230 (33)
210 (31)
210 (2.1)
210 (2.1)
350 (50)
280 (40)
Full load
Rear
230 (33)
280 (40)
230 (33)
260 (37)
260 (2.6)
280 (2.8)
350 (50)
280 (40)
Sustained high speed driving (more than an hour at above 120 kmlh
= 72 mph) : air
pressure of
cold tires should be increased by 30 kPa (4 psi). Note: This does not apply to
the "Spec ia l Spare " .
• For USA/Canada: refer to sticker on front right door.
Tightening torques
Nm
Trailing arm bracket ......................................... .
45
Springs
rear, upper mount. . . . . . . . . . . . . . . . . . . . . . . . . .. (approx.) 48
Attaching
bolts, front brake calipers ............. .............. . 100
Attaching bolts, rear brake calipers ............................ . 58
Whe e
ls .................................................... .
85
Stee l
1.0 mm
(0.039 in)
0.8
mm
(0.032 in)
ttlb
33
35
74
43
63
159
I
III .. III II III ... III ·11 III