FoldIng the rear Seat backreSt
1. Press this button to open the fuel filler door. 2. Hang the fuel filler cap on the hook while refueling. reFUelIngemergency brake aSSISt (eba)
blInd Spot InFormatIon
SyStem (blIS)*
If the blIS indicator lights illuminate occasion
-ally even when there are no other vehicles in the blind area, this may be caused by light re-flected from a wet road surface, the vehicle’s own shadow against a large, light, smooth surface, or sunlight directly in the camera when the sun is low on the horizon.
In the event of a fault, blInd Spot SySt.
ServIce reqUIred will be displayed. See
the Owner’s Manual for other blIS-related
messages. eba is designed to provide full brake effect
immediately in the event of sudden, hard
braking. When eba is activated, the brake
pedal will go down more than usual.
– Press and hold the brake pedal for as long as necessar y – there will be no braking ef-fect if the pedal is released.
Place the head restraint in the plastic tubes, which are now accessible on the underside of the seat cushions.
Fold the backrest down completely.
1 Hang the seat belt in the jacket holder.
Fold up the seat cushion.
Release the catch and fold the backrest down partially.
Press the catch at the base of the head restraint and remove the head restraint.
Remove the head restraint. note
The front passenger’s seat backrest can also
be folded down. See point 6 of adJUSTING
THe FRONT SeaT.
car care
Hand washing is gentler on the paint than an automatic car wash. Since the paint on a new vehicle may take several months to harden completely, we recommend washing the vehicle by hand during this period. Use clean water, a suitable car washing detergent and
a sponge.
keep in mind that dirt or grit on the
sponge can scratch the paint.
