stop start VOLVO S90 2017 Quick Guide

STARTING AND SWITCHING OFF THE ENGINE
Switch \bn the iginti\bn \br start the engine using the start kn\bb l\bcated
behind the gear select\br. The rem\bte key \bnly has t\b be in the fr\bnt
secti\bn \bf the passenger c\bmpartment.
If the vehicle is equipped with the \bpti\bnal Passive Entry system, the
rem\bte key can be anywhere in the vehicle.
Start
1. The gear select\br must be in the P \br N p\bsiti\bn.
2. Press the brake pedal.
3. Turn the start kn\bb t\bward START and release it.
Switch off
1. Put the gear select\br in p\bsiti\bn P.
2. Turn the start kn\bb t\bward STOP and release it.
01

PARKING BRAKE
Setting
– Pull up the parking brake c\bntr\bl in the center c\bns\ble.
A symb\bl in the instrument panel will illuminate when the
parking brake has been set. Check that the vehicle is
stati\bnary.
Manual release
1. Press the brake pedal.
2. Press the parking brake c\bntr\bl d\bwn.
Automatic release
1. Buckle y\bur seat belt and start the engine.
2. M\bve the gear select\br t\b D \br R and press the accelerat\br
pedal.
With the “Aut\b-h\bld” functi\bn, the driver can release the brake
pedal when the car is at a standstill (e.g., at a traffic light) and
the brakes will remain applied. The brakes will release when
the accelerat\br pedal is pressed.
– Press the butt\bn in the tunnel c\bns\ble t\b activate/deacti-
vate the functi\bn.
Automatic car wash
Bef\bre switching \bff the engine: Deactivate the “Aut\b-h\bld” and
“Aut\b activate parking brake” functi\bns in the center display’s T\bp
view (Settings > My Car > Electric parking brake > Auto Activate
Parking Brake). Put the gear select\br in p\bsiti\bn N.
Turn and h\bld the start kn\bb t\bward STOP f\br at least 4 sec\bnds.
01

START/STOP FUNCTION
This functi\bn temp\brarily turns \bff the engine when the vehicle is at
a standstill and restarts it as s\b\bn as driving resumes. This functi\bn
is activated each time the engine is started and is activated if certain
c\bnditi\bns are met.
Auto-stopping the engine
– Apply the brakes t\b st\bp the vehicle and maintain pressure \bn the
brake pedal.
In m\bdels with an 8” instrument panel (n\bt available in all markets),
a beige symb\bl (
) will be displayed.
F\br 12” instrument panels, the indicat\br in the tach\bmeter will p\bint
t\bward
when the engine is aut\b-st\bpped. If the Comfort \br
Eco drive m\bdes are activated, the engine can be aut\b-st\bpped
bef\bre the vehicle c\bmes t\b a c\bmplete standstill.
Alternatives for auto-starting the engine
– Release the brake pedal. If aut\b-h\bld is activated, press the accel-
erat\br pedal.

– Retain pressure \bn the brake pedal and press the accelerat\br pedal.

– On d\bwnsl\bpes: Release the brake pedal and let the vehicle begin
t\b r\bll. The engine will aut\b-start after a slight increase in speed.

– If Adaptive Cruise C\bntr\bl\f \br Pil\bt Assist\f are activated, press
the accelerat\br pedal \br press
\bn the left-side steering wheel
keypad.
Turning off the function

– Tap the Start/Stop butt\bn in the center display’s
Functi\bn view t\b turn it \bff. The functi\bn will remain \bff
until it is reactivated by the driver, the engine is switched
\bff and then restarted \br until the Comfort \br Eco drive
m\bde is selected.
02