fuel VOLVO V50 2009 Quick Guide

FUel
1 low fuel level indicator When the symbol illuminates, refuel as soon as possible.
2 Fuel gauge The fuel filler door is on the right, as indi-cated by the arrow.
OdOmeTeR
3 Press quickly to toggle between T1 & T2. Press and hold to reset the displayed odometer.
4 The trip odometer display shows two separate trip odometers, T1 & T2.
dISP lAy
5 Information display (trip computer information, messages, clock and am-bient temperature).
TRIP cOmPUTeR And OdOmeTeR
IndIcATOR And WARnIng lIghTS
See the information in the display.
Ab S warning light. Stop safely.Restar t the engineA.
Stop safely and take the action shown in the display. b
rake failure warning light, stop safely. Check brake fluid levelB.
l ow oil pressure,
stop safely and check the oil levelB. d
ST c stability system, flashes
when the system is working.A. Contact a Volvo retailer if the symbol stays on after the engine has been restarted.
B. Have the vehicle towed if the symbol remains illuminated.
TRIP cOmPUTeR
6 Press to erase a displayed message.
7 Turn to show trip computer information such as mIle S TO emPTy TA nk in the information display.
8 Reset current function. A long press resets all functions.
n
OT e
mIle S TO emPTy TA nk is an approxima-tion, based on recent average fuel consump-tion.

FOldIng The ReAR SeAT bAckReST
A. Hang the seat belt in the jacket holder.
B. Fold up the seat cushion.
C. Release the catch and fold the backrest down partially.
D. Press the catch at the base of the head restraint and remove the head restraint.

E. Place the head restraint in the plastic tubes, which are now accessible on the under side of the seat cushions.
F. Fold the backrest down completelyA.
A. The front passenger’s seat backrest can also be folded down. See point 6 of ADJUSTING THE FRONT SEAT.
Press this button to unlock the fuel filler door.
Hang the fuel filler cap on the hook while refueling. ReFUelIngemeRgency bRAke ASSIST, ebA
blIS – blInd SPOT InFORmATIOn SySTem (OPTIOn)
If the BLIS indicator lights illuminate occasionally even when there are no other vehicles in the blind area, this may be caused by light reflected from a wet road surface, the vehicle’s own shadow against a large, light, smooth surface, or sunlight directly in the camera when the sun is low on the horizon.
In the event of a fault, blind spot syst. service required will be displayed.
EBA is designed to provide full brake effect immediately in the event of sudden, hard braking. When EBA is activated, the brake pedal will go down more than usual. Press and hold the brake pedal for as long as necessar y. There will be no braking effect if the pedal is released.