clock VOLVO V70 2008 Owners Manual
[x] Cancel search | Manufacturer: VOLVO, Model Year: 2008, Model line: V70, Model: VOLVO V70 2008Pages: 274, PDF Size: 7.82 MB
Page 48 of 274

Outside of the PCC's range
If the PCC is more than approximately 300 ft (100 m) from  the vehicle when the information button is pressed, no new
information will be  received.  The PCC most  recently used to lock or unlock the vehicle will show the vehicle's most
recently received  status. The indicator lights will not flash  when the information button is pressed while the PCC is out
of range.
 NOTE 
If none  of the indicator lights illuminate when the information button is pressed, this  may be  because the most  recent
transmission between the vehicle and  the PCC was interrupted or impeded  by buildings or other objects.
Heartbeat Sensor
The heartbeat sensor function 
 is a  complement  to the vehicle's standard alarm, and  indicates at a  distance of up to
300 ft (100 m) that someone may be  in the vehicle. The heartbeat sensor only functions if the alarm has been triggered.
 NOTE 
The heartbeat sensor registers a  person's heartbeat in the form  of vibrations in the vehicle's chassis. For this  reason,
the sensor's function may be  impaired in areas with high levels of noise or vibrations.
Keyless drive
Vehicles equipped with the optional Personal  Car  Communicator have the keyless  drive function. See  page 61
 for
detailed information.
57 02 Locks and alarm
Remote key and key blade
Detachable key blade
The key  blade can be  removed from  the remote control. When removed, the key  blade can be  used as follows:
 To lock/unlock the driver's door
 To lock/unlock the glove compartment (see page 65)
 To enable/disable the private locking function (see page 58)
Unlocking the doors with the detached key blade
Insert the key  blade as far as possible in the driver's door lock. Turn  the key  blade clockwise approximately one -
quarter turn to unlock the driver's door only.
 NOTE 
After unlocking the driver's door with the key  blade, opening the door will trigger the alarm.
To disable the alarm:
Insert the remote key  in the ignition slot.
Locking  the doors with the detached key blade
1. Lock the rear doors and  the front  passenger's  door by pressing the lock button on each door.
2. Turn  the key  blade one -quarter turn counter-clockwise to lock the driver's door.
ProCarManuals.com 
Page 50 of 274

vehicle is brought to the retailer for service.
With the private locking function activated:
 The vehicle's doors can be  locked or unlocked with the remote
 The engine can be  started
 The glove compartment cannot be  unlocked
 The tailgate  cannot be  unlocked or opened with the remote
 The rear floor  hatch cannot be  opened
Activating  the private locking function
1. Remove the key  blade from  the remote control.
2. Turn  the key  blade 180° clockwise in the glove compartment lock to lock the glove compartment and  disconnect the
tailgate  lock from  the central locking system. Valet lock activated  will appear in the information display.
Deactivating the private locking function
Turn  the key  blade 180° counterclockwise in the glove compartment lock to deactivate private locking.
59 02 Locks and alarm
Remote key and key blade
See  page 65 for information on locking the glove compartment normally, without activating  the private locking
function.
60 02 Locks and alarm
Remote key and key blade
Replacing the battery in the remote key
ProCarManuals.com 
Page 56 of 274

The lock buttons  on the door panel can be  used to lock or unlock all doors and  the tailgate  at the same time.
Unlocking
Press the unlock button.
Locking
Press the lock button after the front  doors have been closed.
 Each door can be  locked individually with the lock button on the respective doors. The door must  be  closed first.
 The door can be  unlocked and  opened by pulling on the door handle twice.
Automatic relocking
If the doors are unlocked, the locks will automatically  reengage (re-lock) and  the alarm will rearm after 2 minutes
unless a  door or the tailgate  has been opened.
Automatic locking
When the vehicle starts to move, the doors and  tailgate  can be  locked automatically.  This feature can be  turned on or
off under Car  settings 
 Lock settings  Doors  automatic  lock . See  page 125 for a  description  of the menu system.
65 02 Locks and alarm
Locks
Glove compartment
The glove compartment can only be  locked and  unlocked using the detachable key  blade in the remote key.  See  page
57 for information on removing the key  blade from  the remote key.
 Unlock  the glove compartment by turning the key  a  quarter of a  turn (90°)  counterclockwise. The key  slot  is
vertical when the glove compartment is unlocked.
ProCarManuals.com 
Page 57 of 274

 Lock the glove compartment by turning the key  a  quarter of a  turn (90°)  clockwise. The key  slot  is horizontal when
the glove compartment is locked.
Locking/unlocking  the tailgate
Unlocking the tailgate  with the remote key
Press the tailgate  unlock button on the remote. See  also page 54
.
The alarm indicator light on the dashboard will go out to indicate that the alarm is not monitoring  the entire vehicle.
The accessory  movement and  inclination sensors  will be  automatically  disconnected.
When the tailgate  is closed again, it will relock, and  all alarm functions will be  reactivated.
Locking the tailgate  with the remote key
Press the lock button on the remote. See  also page 54
.
Unlocking the tailgate  from  inside the vehicle
Press the button on the lighting panel  to unlock (but not open1) the tailgate.
 NOTE 
The taillights will illuminate automatically  for a  short period when the tailgate  has been opened.
1This  button  also opens, but does not close, the tailgate  on models equipped with  the optional power tailgate  (see page 203).
66 02 Locks and alarm
Alarm
ProCarManuals.com 
Page 68 of 274

until the fault has been rectified but the text message can be  cleared  with the READ button, see page 126. The
warning symbol  can also come on in conjunction with other symbols.
Action:
1. Stop in a  safe place. Do not drive the vehicle further.
2. Read the information on the information display. Implement the action  in accordance with the message in the
display. Clear the message using READ.
Reminder  - doors not closed
If one  of the doors, the hood or trunk lid is not closed properly, the information or warning symbol  comes on together
with an  explanatory text message in the instrument panel. Stop the vehicle in a  safe place as soon as possible and  close
the door, hood or tailgate.
If the vehicle is driven at a  speed lower than approximately 5 mph (7 km/h), the information symbol  comes on.
If the vehicle is driven at a  speed higher than approximately 5 mph (7 km/h), the warning symbol  comes on.
Trip  odometers
Odometer display
Button for toggling between T1  and  T2, and  for resetting  the odometer.
The trip odometers are used to measure short distances. A short press on the button toggles between the two trip
odometers T1  and  T2. A long press (more than 2 seconds) resets an  active trip odometer to zero. The distance is shown
in the display.
79 03 Your driving  environment
Instruments and controls
Clock
ProCarManuals.com 
Page 69 of 274

Display
Control for setting the clock.
Turn  the control clockwise/counterclockwise to set the time. The set time is shown in the information display.
80 03 Your driving  environment
Ignition modes
Functions
Inserting and removing the remote key
The various  ignition modes are accessed by inserting the remote key  into the ignition slot.
The remote key  can be  removed from  the ignition slot  by pressing the key  in. It will then be  ejected slightly  and  can
be  removed from  the slot.  The gear selector must  be  in position P (Park) .
 NOTE 
The brake pedal must  not be  depressed  when accessing ignition modes I  or II.
 CAUTION 
Foreign objects in the ignition slot  can impair function or damage the lock.
Ignition mode 0
Insert the remote key  in the ignition slot.
ProCarManuals.com 
Page 122 of 274

Blower control
Turn  the control clockwise to increase or counterclockwise to decrease  the blower speed. Pressing the AUTO  switch
will automatically  regulate blower speed and  override manual  adjustment.
 NOTE 
If the blower is turned off completely,  the air conditioning is disengaged, which  may result in fogging on the
windows.
Heated front seats (option)
 Press the button once for the highest heat level  - three indicator lights come on.
 Press the button twice for a  lower heat level  - two indicator lights come on.
 Press the button three times for the lowest heat level  - one  indicator light comes on.
 Press the button four times to switch off the heat - no indicator lights come on.
132 04 Comfort and driving  pleasure
Climate system
Heated rear seats 1
Heat control for the outboard seating positions takes place in the same way as for the front  seat.
Air  distribution
The figure consists of three buttons.  When the buttons  are pressed, an  indicator light in front  of the respective part of
the figure illuminates  and  shows  which  air distribution is selected, see page 135
.
1Option  on Canadian  models only.
Auto
ProCarManuals.com 
Page 129 of 274

 Internal audio sources: AM, FM  and  CD
 External audio source. For connection, see page 136
 Push  button and  knob controls for making sound settings
 Navigation  button
 Volume and  on/off
Audio volume and automatic volume control
The audio system compensates for disrupting noises in the passenger  compartment by increasing the volume according
to the speed of the vehicle. The level  of sound compensation can be  set at low, medium or high. Select  the level  under
Audio settings
 Auto volume control .
External audio source audio volume
External devices such as an  MP3  player can be  connected to the AUX input, see page 136
. The volume of the external
sound source AUX may be  different  from  the volume of the internal sound sources such as the CD player or the radio.
If the external sound source's volume is too high, the quality of the sound may be  impaired. To help prevent this,
adjust the input volume of the external audio source:
1. Set the audio system in AUX mode using MODE  and  use 
 to navigate to Volume, AUX input.
2. Turn  the control 
 or press / the navigation button.
Sound settings
Press the control 
 repeatedly to toggles among the sound settings. Adjustments are made by turning the control .
Bass  - Bass level.
Treble  - Treble level.
Fader - Balance between the front  and  rear speakers.
Balance  - Balance between the right and  left speakers.
Subwoofer  (option on certain markets only) - Level for the bass speaker. The subwoofer can be  switched off by
turning control 
 counterclockwise to MIN . The location of the subwoofer is shown in the illustration.
ProCarManuals.com 
Page 186 of 274

 CAUTION 
Avoid spilling  gasoline during refueling. In addition to causing damage to the environment, gasolines containing
alcohol  can cause damage to painted  surfaces, which  may not be  covered under the New Vehicle Limited Warranty.
199 05 During  your  trip
Refueling
Manually opening the fuel filler door
If necessary,  the fuel filler  door can be  opened manually.
 Open the side hatch in the cargo area (on the same side as the fuel filler  door).
 Grasp the green cord with a  handle.
 Pull the cord straight rearward until the fuel filler  door clicks open
200 05 During  your  trip
Refueling
Opening/closing the fuel cap
Fuel vapor expands in hot weather. Open the filler  cap slowly.
After refueling, close the fuel filler  cap by turning it clockwise until it clicks into place.
ProCarManuals.com 
Page 217 of 274

232 06 Maintenance and specifications
Replacing bulbs
Fog lights
1. Remove the cover by pressing in the clips and  pulling straight out.
2. Unscrew the fog light housing screw and  pull it out.
3. Turn  the bulb counterclockwise and  remove it.
4. Install a  new bulb by turning clockwise.
5. Press the bulb into the holder. (The profile of the bulb holder corresponds to the profile of the foot of the bulb.)
6. Reinstall the bulb holder. The TOP mark on the bulb holder must  always be  upward.
7. Put the cover back into place.
Taillight housing, turn signal
The bulbs in the taillight cluster are replaced  from  inside the cargo area (not the LED  functions).
 NOTE 
Before starting to replace  a  bulb, see page 228
.
1. Open the panel.
2. Remove the insulation  by pulling straight out.
ProCarManuals.com