audio VOLVO XC90 2007 Owner's Manual

2007 Volvo XC90
- Choose a frequency band with the AM/ FM button.
- Press and hold down the AUTO button (2) until AUTOSTORING is shown i\
n the display.
When AUTOSTORING is no longer displayed, the autostore process is comple\
te. If there are no stations
with sufficient signal strength, NO AST FOUND is displayed.
Stopping autostore
- Press EXIT.
Selecting an autostored station
- Press AUTO (2) briefly. AUTO will be displayed.
- Press one of the preset buttons.
The radio will remain in Autostore mode until AUTO, EXIT, or AM/FM is pr\
essed.
SCAN
This function automatically searches the currently selected waveband (A\
M, FM1, or FM2) for strong
stations. When the radio finds a station, it will pause for approximatel\
y 8 seconds, after which it will
continue scanning.
Activating/deactivating Scan
- Choose a waveband by pressing the AM/ FM button.
- Press SCAN (1). SCAN will be shown in the display.
- Press EXIT to stop scanning.
Storing a station found by SCAN
Stations can be stored on the preset buttons while the SCAN function is \
activated.
- Press a preset button and hold it down until Station stored is display\
ed.
- This deactivates SCAN and the stored station can be selected by pressi\
ng the preset button.
Radio text
Certain stations broadcast program information, which can be shown in th\
e display.
- Press the MENU button.
- Select RADIOTEXT in the menu and press ENTER.
Select RADIOTEXT again to deactivate.
pg. 229 Audio
Sirius satellite radio (option or retailer-installed accessory)
Listening to satellite radio
file:///K|/ownersdocs/2007/2007_XC90/07xc90_11.htm (12 of 26)12/30/200\
6 5:53:54 PM

2007 Volvo XC90
The Sirius satellite system consists of a number of high elevation satel\
lites in geosynchronous orbit.
NOTE: The digital signals from the Sirius satellites are line-of-sight, which\
means that physical
obstructions such as bridges, tunnels, etc, may temporarily interfere wi\
th signal reception.
Selecting Sirius radio mode
- Press Power to switch on the audio system (see
page 220 for information on the standard radio
functions).
- Turn the SELECTOR dial until Sirius 1 or 2 is displayed.
Activating Sirius radio
- Tune to a satellite channel that has no audio, which means that the ch\
annel is unsubscribed and the text
"Call 888-539- SIRIUS TO SUBSCRIBE" is displayed (see also "Selecting a\
channel" below).
- Call Sirius at 1-888-539-SIRIUS (7474). - When asked for the Sirius \
ID number press AUTO to
display this number. It is also possible to retrieve the Sirius ID from \
the MENU.
- "UPDATING SUBSCRIPTION" will be displayed while the subscription is be\
ing updated, after which
the display will return to the normal view.
SIRIUS ID
The SIRIUS ID is required when contacting the Sirius Call Center. It is \
used to activate your account
and when making any account transactions. The SIRIUS ID is sometimes ref\
erred to as the Electronic
Serial Number (ESN).
This function displays the 12-digit SIRIUS ID.
Selecting a channel category
- Select Sirius radio mode as described above.
- Press ENTER.
- Use the up/down arrow keys to scroll through the list of categories.
- Press ENTER to select a category.
- Use the
buttons to select a channel in the currently chosen category.
NOTE:
l The category "All" is default, which enables you to scroll through the e\
ntire list of available satellite
channels.
l The channel categories are automatically updated several times a year. T\
his takes approximately two
minutes and will interrupt normal broadcasting. A message will be displa\
yed while updating is in
progress. Information on channel or feature updates is available at www.\
sirius.com.
Selecting a channel
There are two ways of tuning in a channel:
file:///K|/ownersdocs/2007/2007_XC90/07xc90_11.htm (13 of 26)12/30/200\
6 5:53:54 PM

2007 Volvo XC90
l By pressing and holding the buttons to start the scroll function. The scrolling function
begins slowly and increases speed after approximately 5 seconds. Release\
the button to listen to the
currently displayed channel.
l Through direct channel entry
Direct channel entry
The Sirius satellite channels are numbered consecutively throughout all \
of the categories. To access a
channel directly:
- Press MENU and scroll to "Direct channel entry."
- Use the numerical keypad to enter the channel's number. Press EXIT if \
necessary to erase a digit.
- Press ENTER. The radio will tune to this channel, even if it belongs t\
o a category other than the
currently selected one.
NOTE:
l The numbers of skipped or locked channels will not be displayed.
l If a channel is locked, the access code must be entered before the chann\
el can
pg. 230 Audio
Sirius satellite radio (option or retailer-installed accessory)
be selected. See "Unlocking a channel" on page 231.
Scanning
SCAN automatically searches through the list of satellite channels. Storing a channel
A total of 20 satellite channels can be stored; 10 channels each for Sir\
ius 1 and 2.
l A long press on one of the number keys stores the currently tuned channel on t\
hat key.
l A short press on a number key while the radio is in Sirius 1or 2 mode will tune\
to the preset satellite
channel stored on that button, regardless of the currently selected chan\
nel category.
Song Seek and Song Memory
The Song Seek and Song Memory functions provide both audio and visual no\
tification when Sirius is
broadcasting your favorite songs. Song Seek enables you to store the nam\
e of the song for future
advance notification when that song is being played. The Song Memory fea\
ture makes it possible to
view all of the current songs that are stored in memory.
Song memory
Up to ten songs can be saved in the system's memory.
- Press MENU.
- Scroll to "Add song to song mem." and follow the instructions shown in\
the display.
If a new song is selected when the memory is full, you will be prompted \
to press ENTER to delete the
file:///K|/ownersdocs/2007/2007_XC90/07xc90_11.htm (14 of 26)12/30/200\
6 5:53:54 PM

2007 Volvo XC90
last song on the list.
The remaining songs in the list will move down one position, and the new\
ly added song will be placed at
the top of the list.
Song seek
When a satellite radio channel plays one of the songs stored in the song\
memory, the listener will be
alerted by a text message and an audible signal.
Press ENTER to listen to the song or EXIT to cancel.
To activate/deactivate the song seek function:
- Press MENU
- Scroll to "Song seek"
- Press ENTER to activate or deactivate the function.
NOTE: When the song has ended, the radio will remain tuned to the channel on \
which the song was
played.
Radio text
The text that is displayed about the song currently playing can be chang\
ed. Use the AUTO button to
switch between Artist, Title, Composer, or to switch radio text off, or \
use the menu to display and select
among these catagories.
Advanced settings
This menu function enables you to make settings on certain Sirius satell\
ite radio functions. To access
this menu:
- Press MENU.
- Select Adv. settings.
WARNING!
Settings should be made when the vehicle is at a
standstill.
The following settings can be made in the Sirius menu.
l Songs can be added to the song list
l Channel skip settings can be made
l Channel lock settings can be made
l The channel access code can be displayed or changed
pg. 231 Audio
file:///K|/ownersdocs/2007/2007_XC90/07xc90_11.htm (15 of 26)12/30/200\
6 5:53:54 PM

2007 Volvo XC90
Sirius satellite radio (option or retailer-installed accessory)
l Your Sirius ID can be displayed
Skip options
This function is used to remove a channel from the list of available cha\
nnels.
Skip current channel
- Select CHANNEL SKIP LIST and press ENTER.
- Select a category in the list and press ENTER.
- Skip channels in the list presented by pressing ENTER.
Unskip all channels
This permanently removes all channels from the skip list and makes them \
available for selection.
Temp. unskip all ch.
This function will temporarily unskip all channels and make them availab\
le for selection. The channels
remain on the skip list and will again be skipped the next time the igni\
tion is switched on.
Channel lock
Access to specific channels can be restricted (locked). A locked chann\
el will not provide audio, song
titles, or artist information.
NOTE: All channels are initially unlocked at delivery.
Locking a channel:
- Select "Adv. settings" in the menu and select LOCK OPTIONS and press E\
NTER.
- Select CHANNEL LOCK LIST and press ENTER
- Enter the channel access code
1 and press ENTER.
- Select a category in the list and press ENTER.
- Lock channels in the list presented by pressing ENTER.
The channel is now locked and a checked box will be displayed to indicat\
e this. It will be necessary to
enter the channel access code
1 in order to listen to a locked channel.
Unlocking a channel:
A channel's access code
1 is required to unlock a channel.
Unlock all channels
This permanently removes all channels from the locked list and makes the\
m available for selection.
file:///K|/ownersdocs/2007/2007_XC90/07xc90_11.htm (16 of 26)12/30/200\
6 5:53:54 PM

2007 Volvo XC90
Temp. unlock all ch.
This function will temporarily unlock all channels and make them availab\
le for selection. The channels
remain on the locked list and will again be locked the next time the ign\
ition is switched on.
CHANGE CODE
This function makes it possible to change the channel access code. The d\
efault code is 0000.
To change the code:
- Select CHANGE CODE and press ENTER.
- Enter the current code and press ENTER.
- Enter the new code and press ENTER.
- Confirm the new code and press ENTER.
If an incorrect code is entered, the text "Incorrect code!" is displayed\
.
If you have forgotten the access code:
Select "SIRIUS ID" in the Sirius settings menu and press ENTER.
Press and hold the ENTER button for 2 seconds.
The current code will be displayed.
Your Volvo retailer can also provide you with assistance.
1. The default code is 0000. If you have changed the code and forgotten \
it, see the section "If you have forgotten
the access code" on the following page.
pg. 232 Audio
Auxiliary equipment
AUX (option)
The AUX (auxiliary) port can be used to connect, for example, an mp3 p\
layer.
If the player is being charged through a 12- volt socket while it is con\
nect to the AUX port, sound
file:///K|/ownersdocs/2007/2007_XC90/07xc90_11.htm (17 of 26)12/30/200\
6 5:53:54 PM

2007 Volvo XC90
quality may be impaired.
The volume of the external sound source AUX may be different from the vo\
lume of the internal sound
sources such as the CD player or the radio.
Auxiliary sound level
If the external sound source's volume is too high, the quality of the so\
und may be impaired.
This can be prevented by adjusting the external sound source's input vol\
ume.
- Select AUX VOLUME in the menu and press ENTER.
- Adjust the volume with SELECTOR (1) or with the up/down arrows (2)\
and press ENTER.
NOTE:
l This cannot be done with the optional steering wheel keypad.
l The cover over the cup holders should be open when an auxiliary device i\
s connected.
pg. 233 Audio
CD functions
Playing a CD
file:///K|/ownersdocs/2007/2007_XC90/07xc90_11.htm (18 of 26)12/30/200\
6 5:53:54 PM

2007 Volvo XC90
CD player
If a CD is in the slot and the audio system is in CD mode when it is swi\
tched on, the CD will be played
automatically. Otherwise, to play a CD:
- Insert a CD into the slot (2).
- Select the CD mode using the SELECTOR control (4) or the CD button (\
1).
CD changer (option)
The CD changer can hold up to six discs.
If a CD position in the changer containing a disc is selected, and the a\
udio system is in CD mode when it
is switched on, the CD will play automatically. Otherwise, to play a CD:\

- Select an empty position using the station setting buttons 1-6. INSERT\
DISC will be displayed. Be
sure this text is displayed before inserting a disc. The numbers of posi\
tions already containing discs are
shown in the display.
- Insert a CD into the slot (2).
- Select the CD mode using the SELECTOR control (4) or the CD button (\
1).
Ejecting CDs
CD player
- Press the EJECT button (3) to eject the CD.
NOTE: For reasons of traffic safety, the ejected CD must be removed within 12\
seconds or it will be
automatically drawn back into the slot and the CD player will enter paus\
e mode. Press the CD button to
restart the disc.
CD changer
Ejecting one disc
A short press on the EJECT button (3) will eject the CD that is currently playing.
NOTE: For reasons of traffic safety, you have 12 seconds in which to remove t\
he ejected disc. After
that, the disc automatically reinserts into the player.
Ejecting all discs
A long press on the EJECT button (3) starts the EJECT ALL function.
The text EJECTING ALL will be displayed and the entire magazine will be \
emptied disc by disc.
NOTE:
l The EJECT ALL function can only be used while the vehicle is at a stands\
till and will be cancelled if
the vehicle begins to move.
l For reasons of traffic safety, you have 12 seconds in which to remove th\
e ejected disc. After that, the
disc automatically reinserts into the player.
Pause
file:///K|/ownersdocs/2007/2007_XC90/07xc90_11.htm (19 of 26)12/30/200\
6 5:53:54 PM

2007 Volvo XC90
To pause CD playback, turn the volume all the way down. "CD paused" will\
be displayed. This will not
occur if someone in the rear seat is listening to the CD through the opt\
ional headphones. Play will
resume when the volume is turned up again.
Audio files
In addition to playing normal music CDs, the CD player/changer can also \
play discs containing files in
mp3 or wma format.
pg. 234 Audio
CD functions
NOTE: Certain discs that are copy protected cannot be read by the player. Whe\
n a disc with audio files
is inserted in the player, the player scans the disc's folders before it\
begins playing the files. The length
of time that this takes depends on the quality of the disc.
Navigating the disc and playing tracks
If a disc with audio files is in the CD player, press ENTER to display a\
list of folders on the disc.
Use the up and down arrows to move among the folders on the disc. Audio \
files have the
symbol and
folders containing these files have the
symbol.
Press ENTER to play a selected folder or a file.
When the music file has been played, the player will continue to play th\
e rest of the files in the current
folder. When all of the files in the folder have been played, the player\
will automatically go to the next
folder and play the files in it.
NOTE: Press
if the entire name of the current track does not fit in the display.
Changing tracks
CD player/CD changer
l Briefly press to go to the next/ previous track or file. The optional steering wheel \
keypad can be used in the same way.
l Press and hold down to search within a track/file. The search continues as long as the
buttons are depressed. The optional steering wheel keypad can be used in\
the same way.
SCAN
This function plays the first ten seconds of each track or file
1.
- Press SCAN to begin scanning the tracks or files on the currently sele\
cted CD.
- Press EXIT/CLEAR or SCAN to interrupt the scan function and listen to \
an entire track or file.
Random play
file:///K|/ownersdocs/2007/2007_XC90/07xc90_11.htm (20 of 26)12/30/200\
6 5:53:54 PM

2007 Volvo XC90
CD player
This function plays the tracks or files on a CD in random order (shuffl\
e).
If a normal music CD is being played:
- Select RANDOM in the menu and press ENTER.
If a CD with mp3 or wma files is being played:
- Select DISC or FOLDER in the menu and press ENTER.
CD changer
This function offers two alternatives for playing the tracks on the disc\
(s) in the CD changer in random
order (shuffle).
l SINGLE DISC (random order on the currently selected disc)
l ALL DISCS (random order on all of the CDs in the changer)
If a normal music CD is being played:
- Select RANDOM in the menu and press ENTER.
- Select SINGLE DISC or ALL DISCS and press ENTER.
NOTE: Press
to play the next randomly selected track. This can only be done on the c\
urrently
selected disc.
If a CD with mp3 or wma files is being played:
- Select SINGLE DISC or FOLDER in the menu and press ENTER.
This function is deactivated when a new disc is selected.
1. CD changer: SCAN only functions on the currently selected disc.
pg. 235 Audio
CD functions
Disctext
Certain CDs contain information about the disc, such as the titles of th\
e tracks, etc. This information can
be shown in the display by activating the DISCTEXT function.
- Press the MENU button.
- Select DISCTEXT in the menu and press ENTER.
- Any information that may be stored on the disc will be displayed.

To deactivate this function, select DISCTEXT and press ENTER.
file:///K|/ownersdocs/2007/2007_XC90/07xc90_11.htm (21 of 26)12/30/200\
6 5:53:54 PM