FOldIng THe ReAR SeAT bAckReSTS
Third row of seats (seven-seat model)
Move the second row of seats as far forward as possible.
A. Pull the handle up.
B. Push the seat cushion as far rearward as possible and fold in the load eyelets.
C. Fold down the backrest.
Second row of seats
Move the seats as far rearward as possible (ap-plies to seven-seat models only).
A. Pull the loop.
B. Fold down the head restraint.
C. Pull the handle to unlock the backrest.
D. Fold down the backrest and press to lock it in the folded position.
The front passenger’s seat backrest can also be folded down. See point 6 of “Adjusting the front seat.”emeRgency bRAke ASSIST (ebA)
TURn SIgnAlS
A. Lane-change sequence, three flashes. B. Full turn sequence.
w
AR nIng ! Never adjust the steering wheel while driving. STeeRIng wHeel AdjUSTmenT
blIS – blInd SPOT InFORmATIOn
SySTem (OPTIOn)
EBA is designed to provide full brake effect immediately in the event of sudden, hard braking. When EBA is activated, the brake pedal will go down more than usual. Press and hold the brake pedal for as long as necessar y. There will be no braking effect if the pedal is released.
If the BLIS indicator lights illuminate occasion-ally even when there are no other vehicles in the blind area, this may be caused by light re-flected from a wet road surface, the vehicle’s own shadow against a large, light, smooth surface, or sunlight directly in the camera when the sun is low on the horizon.
In the event of a fault, blind spot syst. ser-vice required will be displayed.
