07 Wheels and tires
Tire designations
07
184
1
2
3
4
5
6
12
11
10
8
79
G026442
Federal law mandates that tire manufacturers place standardized information on the side-wall of all tires (see the illustration). The following information is listed on the tire sidewall: The tire designation:
NOTE
Please be aware that the following tire designation is an example only and that
this particular tire may not be available onyour vehicle.
215 : the width of the tire (in millimeters)
from sidewall edge to sidewall edge. The larger the number, the wider the tire.
65 : The ratio of the tire's height to its
width in percent.
R : Radial tire (the designation RF and the
symbol indicate that the vehicle is
equipped with optional self-supporting run flat tires 1
. See page 205 for more
information about these tires).
15 : The diameter of the wheel rim (in
inches).
95 : The tire's load index. In this example,
a load index of 95 equals a maximum load of 1521 lbs (690 kg).
H : The tire's speed rating, or the maxi-
mum speed at which the tire is designed to be driven for extended periods of time,carrying a permissible load for the vehi-cle, and with correct inflation pressure.For example, H indicates a speed ratingof 130 mph (210 km/h).
NOTE
The tire's load index and speed rating may not appear on the sidewall because theyare not required by law.
M+S or M/S = Mud and Snow; AT = All
Terrain; AS = All Season
U.S. DOT Tire Identification Number (TIN): This begins with the letters "DOT"
and indicates that the tire meets all fed- eral standards. The next two numbers orletters are the plant code where it wasmanufactured, the next two are the tiresize code and the last four numbers rep-resent the week and year the tire wasbuilt. For example, 1510 means that thetire was manufactured during week 15 of2010. The numbers in between are mar-keting codes used at the manufacturer'sdiscretion. This information helps a tiremanufacturer identify a tire for safetyrecall purposes.
Tire Ply Composition and Material Used: Indicates the number of plies indi-
cates or the number of layers of rubber- coated fabric in the tire tread and side-wall. Tire manufacturers also must indi-cate the ply materials in the tire and thesidewall, which include steel, nylon, poly-ester, and others.
1 Self-supporting run flat tires may not be available on all models
11 Specifications
Dimensions
11
284
PositionDimensionin (mm)
AWheelbase112.6 (2857)
BLength189.3 (4807)
CLoad length, floor, seatback down79.4 (2018)
DLoad length, cargo area44 (1118)
EHeight70.2 (1784)
FLoad height34.3 (872)
GTrack, front64.3 (1634)
HTrack, rear63.9 (1624)
