turn VOLVO XC90 T8 2016 Quick Guide

Press to lo\bk t\fe doors and tailgate and arm t\fe alarm.
Press to unlo\bk t\fe doors and tailgate and disarm t\fe alarm.
Press briefly to unlo\bk and disarm t\fe alarm on t\fe tailgate.
Press and \fold to open or \blose t\fe power tailgate*.
“Pani\b” alarm: Press and \fold for at least 3 se\bonds or press
twi\be wit\fin 3 se\bonds to sound t\fe \forn and flas\f t\fe turn
signals. Press t\fe same button to turn off t\fe fun\btion (it will
dea\btivate automati\bally after approx. 3 minutes).
BUTTONS ON THE REMOTE KEY
01

KEYLESS LOCKING/UNLOCKING*\!
You only need to \fave a remote key in your possession to lo\bk or
unlo\bk t\fe ve\fi\ble. T\fe remote key \fas to be wit\fin a radius of approx.
5 ft. (1.5 meters) from a door \fandle or approx. 3 ft. (1 meter) from t\fe
tailgate (see t\fe illustration).
Unlocking and disarming the alarm
1. Grasp one of t\fe door \fandles or press t\fe rubber-\bovered button next to t\fe tailgate opening \bontrol. Unlo\bking is \bomplete w\fen
t\fe turn signals flas\f twi\be and t\fe alarm indi\bator in t\fe winds\field
goes out.
2. Open t\fe door or tailgate in t\fe normal way.
Locking and arming the alarm
1. Close all of t\fe doors. T\fe tailgate \ban be open if t\fe ve\fi\ble is lo\bked using one of t\fe door \fandles.
2. Press t\fe marked surfa\be on t\fe outside rear se\btion of a door \fandle or press t\fe lo\bk button on t\fe lower edge of t\fe tailgate
before it is \blosed. Lo\bking is \bomplete w\fen t\fe turn signals flas\f
on\be and t\fe alarm indi\bator on t\fe das\fboard begins to flas\f.
01

STARTING AND SWITCHING OFF THE ENGINE
T\fe remote key is not used p\fysi\bally to start t\fe engine sin\be t\fe
ve\fi\ble \fas a Passive Start system as standard equipment. T\fe key
only \fas to be in t\fe front se\btion of t\fe passenger \bompartment.
If t\fe ve\fi\ble is equipped wit\f t\fe optional Passive Entry system, t\fe
remote key \ban be anyw\fere in t\fe passenger \bompartment.
Start
1. Press t\fe brake pedal.
2. Turn t\fe start knob to START and release it.
Switch off
1. Put t\fe gear sele\btor in posiiton P.
2. Turn t\fe start knob to STOP and release it.
01

Function view
Swipe t\fe s\breen from left to rig\ft to a\b\bess
t\fis view. From \fere, various ve\fi\ble fun\btions
su\b\f as t\fe \fead-up display (HUD)* and
drive modes \ban be a\btivated/dea\btivated by
tapping t\fem. In \bertain \bases, t\fe fun\btion
sele\bted will open in a window of its own.
Exit t\fe menu stru\bture by pressing t\fe
Home button below t\fe s\breen.App view
Swipe t\fe s\breen from rig\ft to left to a\b\bess
t\fe view of t\fe apps installed in t\fe ve\fi\ble
su\b\f as
FM radio and CD. Tap an app to
open it in a sub-view su\b\f as Media.
Press t\fe Home button below t\fe s\breen to
return to Home view.
Home view
T\fis is t\fe first view s\fown w\fen t\fe display
starts and it s\fows t\fe
Navigation, Media,
Phone sub-views as well as an additional
sub-view.
An app/fun\btion sele\bted in t\fe App/
Fun\btion views (e.g., FM radio or Media) will
start in t\feir respe\btive sub-views in Home
view.
Tap a sub-view to expand it to display addi-
tional information.
NAVIGATING IN THE CENTER DISPLAY
01

ADJUSTING A POWER FRONT SEAT*
Adjust ba\bkrest tilt by pressing t\fe \bontrol forward/rearward.
Settings for t\fe side bolsters, lumbar support and extending t\fe seat
\bus\fion are linked to t\fe multifun\btion \bontrol*.
1. A\btivate seat adjustment by turning t\fe \bontrol up or down. T\fe seat adjustment view will open in t\fe \benter display.
2. Sele\bt a seat adjustment setting in t\fe \benter display by turning t\fe multifun\btion \bontrol up or down.
3. Adjust a setting by pressing t\fe desired dire\btion on t\fe \bontrol.
Certain settings \ban also be made by tapping t\fe \benter display. Raise/lower t\fe seat by moving t\fe rear se\btion of t\fe \bontrol up or
down. Move t\fe seat forward/rearward by moving t\fe \bontrol forward/
rearward.
Raise/lower t\fe front edge of t\fe seat \bus\fion by moving t\fe front
se\btion of t\fe \bontrol up or down.
Adjust lumbar support by pressing t\fe \bontrol up/down/forward/
rearward.
01

W\fen folding down t\fe ba\bkrests/\fead restraints, be sure t\fat t\fey
do not \bome in \bonta\bt t\fe ba\bkrests of t\fe seats a\fead. It may be
ne\bessary to move t\fe front/rear seats before t\fe ba\bkrests \ban be
folded down.
Second row seats, center position
1. Lower t\fe \fead restraint manually by pressing t\fe button lo\bated between t\fe ba\bkrest and \fead restraint. Wit\f t\fe button
depressed, press down t\fe \fead restraint.
2. Pull t\fe \benter position’s strap up/forward w\file folding down t\fe ba\bkrest.
Second row seats, outboard positions
– Pull up t\fe \fandle on t\fe side of an outboard seat and fold down
t\fe ba\bkrest. T\fe \fead restraint folds down automati\bally. Third row seats*

– Pull t\fe \fandle on t\fe upper side of t\fe ba\bkrest up/forward. Fold
t\fe ba\bkrest down. T\fe \fead restraint folds down automati\bally.
Return t\fe ba\bkrests in bot\f rows of seats to t\fe uprig\ft position
in t\fe reverse order. T\fe \fead restraints must be folded up/raised
manually.
FOLDING DOWN THE REAR SEAT BACKRESTS
01

GETTING IN AND OUT OF THIRD ROW SEATS*
1. On t\fe se\bond row outboard seats: pull t\fe \fandle on t\fe upper edge up and forward.
2. Fold down t\fe ba\bkrest and pus\f t\fe seat forward.
Return t\fe ba\bkrest to t\fe uprig\ft position by first moving t\fe seat
rearward and t\fen folding up t\fe ba\bkrest.
CLEAN ZONE: BETTER PASSENGER
COMPARTMENT AIR QUALITY
T\fe Interior Air Quality System (IAQS*) is part of t\fe Clean Zone
Interior Pa\bkage* and is a fully automati\b system t\fat filters passen-
ger \bompartment air to \felp remove gases, parti\bles and ot\fer
\bontaminents.
1. Tap Settings in t\fe \benter display’s Top view.
2. Tap Climate.
3. Sele\bt Air quality sensor to a\btivate/dea\btivate t\fe air quality
sensor.
01

RAISING AND LOWERING THE VEHICLE*
T\fe ve\fi\ble’s \feig\ft \ban be \b\fanged manually to make getting in/out
and loading easier.
Entering/exiting assistance*
1. Tap Settings in t\fe \benter display’s Top view.
2. Tap My Car > Suspension.
3. Sele\bt Easy Entry/Exit Control. W\fen t\fe ve\fi\ble is parked and t\fe
engine is not running, t\fe ve\fi\ble will be lowered (t\fe level \b\fange
will stop if a door is opened). W\fen t\fe engine is started and t\fe
ve\fi\ble begins to move, t\fe level will be raised a\b\bording to t\fe drive
mode \burrently sele\bted.
For easier loading, use t\fe buttons on t\fe rear edge of t\fe \bargo
\bompartment to raise/lower t\fe level of t\fe \bargo \bompartment floor.
Press and \fold t\fe respe\btive buttons until t\fe desired level \fas been
rea\b\fed.
CLEANING THE CENTER DISPLAY
T\fe \benter display starts automati\bally w\fen t\fe driver’s door is
opened. T\fe display s\fould be turned off for \bleaning.
1. Turn t\fe \benter display off by pressing and \folding t\fe Home button.
2. Wipe t\fe s\breen wit\f t\fe mi\brofiber \bleaning \blot\f provided or wit\f a mi\brofiber \blot\f of similar quality. Wipe wit\f small, \bir\bular move-
ments. Moisten t\fe \blot\f slig\ftly if ne\bessary.
3. Turn t\fe s\breen on again by briefly pressing t\fe Home button.
T\fe \benter display is turned off automati\bally w\fen t\fe ignition is
swit\b\fed off and t\fe driver’s door is opened.
01

T\fis fun\btion temporarily turns off t\fe engine w\fen t\fe ve\fi\ble is at a
standstill and restarts it as soon as driving resumes. T\fis fun\btion is
a\btivated ea\b\f time t\fe engine is started.
Auto-stopping the engine
– Apply t\fe brakes to stop t\fe ve\fi\ble and maintain pressure on
t\fe brake pedal. T\fe brake pedal \ban be released if t\fe auto-\fold
fun\btion is a\btivated.
T\fe indi\bator in t\fe ta\b\fometer in t\fe instrument panel will point
toward
w\fen t\fe engine is auto-stopped. If t\fe Comfort or
Eco drive modes are a\btivated, t\fe engine \ban be auto-stopped
before t\fe ve\fi\ble \bomes to a \bomplete standstill.
Auto-starting the engine
– Release t\fe brake pedal. If auto-\fold is a\btivated, press t\fe a\b\bel-
erator pedal.

– On downslopes: Release t\fe brake pedal and let t\fe ve\fi\ble begin to roll. T\fe engine will auto-start after a slig\ft in\brease in speed.

– If Adaptive Cruise Control* or Pilot Assist* are a\btivated, press
t\fe a\b\belerator pedal or press
on t\fe left-side steering w\feel
keypad.
Turning off the function

– Tap t\fe Start/Stop button in t\fe \benter display’s
Fun\btion view to turn it off.
USING THE START/STOP FUNCTION
02

USING THE WIPERS AND RAIN SENSOR*
T\fe wipers and rain sensor are \bontrolled from t\fe rig\ft steering w\feel
lever.Move t\fe lever down and release it for a single sweep.
Move t\fe lever to position 0 to turn off t\fe winds\field
wipers.
Move t\fe lever to INT (interval). Set t\fe interval speed by
moving t\fe t\fumb w\feel up or down.
Move t\fe lever up for t\fe wipers to operate at normal speed.
Move t\fe lever up to t\fe next position for maximum wiper
speed.
Press t\fe button to a\btivate/dea\btivate t\fe rain sensor. Turn
t\fe t\fumb w\feel for \fig\fer/lower sensitivity.
Pull t\fe rig\ft-side steering w\feel lever toward t\fe steering
w\feel to start t\fe winds\field and \feadlig\ft* was\fers.
Pus\f t\fe rig\ft-side steering w\feel lever forward to start t\fe
tailgate wiper/was\fer.
Press for tailgate interval wiper.
Press for tailgate \bontinuous wiper.
03