length VOLVO XC90 TWIN ENGINE HYBRID 2017 Owners Manual

INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.118
Changing system settings inSettings view
Settings view's main category System containsgeneral settings and information, such as lan-guage, units of measure, etc.
The system settings under Driver Profile, Date& Time, Keyboard Layouts, Voice Control,Software Updates, Factory reset andServices are described in their respective arti-cles in the owner's manual.

Changing system languages
1. Pull down the center display's Top view andtap Settings.
2.Tap SystemLanguage.
3. Select a new system language. Languagesthat can be used for voice commands areindicated by a voice control symbol.
> This change affects the language used inthe instrument panel, center display andthe head-up display*.

Changing units of measure
Changing length and volume units
1. Pull down the center display's Top view andtap Settings.
2.Tap SystemUnitsUnits.
3. Select one of the following measurementstandards:
•Metric: kilometers, liters and degrees Cel-sius.
•Imperial: miles, gallons and degrees Cel-sius.
•US: miles, gallons and degrees Fahren-heit.
>This change affects the units of measureused in the instrument panel, center dis-play and the head-up display*
Changing tire inflation pressure units
1. Pull down the center display's Top view andtap Settings.
2.Tap SystemUnitsTire Pressure.
3.Select a unit of measure for tire pressure.
> This changes the tire inflation pressureunits used in the Car status app in thecenter display.

Viewing storage information
1. Pull down the center display's Top view andtap Settings.
2.Tap SystemStorage.
>Storage information for the vehicle's harddrive will be displayed, including totalcapacity, available capacity and theamount of storage space used by theapps that have been installed.
Viewing the VIN (Vehicle Identification
Number)
1. Pull down the center display's Top view andtap Settings.
2.Tap SystemVehicle IdentificationNumber.
>The vehicle's VIN will be displayed.

INSTRUMENTS AND CONTROLS
}}
* Option/accessory, for more information, see Introduction.155
Home safe lighting
The home safe lighting function illuminates thearea in front of the vehicle in dark conditions.
This function turns on the headlights, parkinglights, outer door handle lights* and license platelights for a set amount of time.
The length of time that these lights remain illumi-nated can be set in the center display. Thedefault setting is 30 seconds.
To activate home safe lighting:
1.Switch off the ignition (mode 0).
2.Push the turn signal lever as far as possibletowards the dashboard and release it.
3. Exit the vehicle and lock the doors.

Related information
•Using the center display (p. 50)
•Settings view (p. 115)
•Ignition modes (p. 400)
Approach lighting
Approach lighting (the parking lights, outer doorhandle lights*, license plate lighting, courtesylighting and footwell lighting) can be activated toprovide light as you walk toward the vehicle.
To use this feature, deselect/select WelcomeLight in the center display's menu system.
If this function has been selected in the menu, itis activated by pressing the unlock button onthe remote key as you approach the vehicle.
If a door is opened while the function is activated,the lighting in the outer door handle* and cour-tesy lighting will remain illuminated for a some-what longer period of time.
Related information
•Settings view (p. 115)
•Home safe lighting (p. 155)
•Remote key (p. 238)
Messages in the instrument paneland center display
Information and warning messages are dis-played in the instrument panel and center dis-play.
Instrument panel
Message in the instrument panel (12" version)
High-priority messages are displayed in theinstrument panel.
Messages may appear in different parts of theinstrument panel depending on their context. Themessage will time out after a short period of timeor disappear when it has been confirmed or ifaction has been taken. Messages that need to bestored will be saved under My car messages inthe center display's Top view.

INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.163
Windshield and headlight washers
Use the windshield/headlight washers to helpimprove visibility.

Starting the windshield and headlight
washers
Washing function
–Move the right-side steering wheel levertoward the wheel to start the windshield andheadlight washers.
>After the lever is released the wipersmake several extra sweeps.
CAUTION
•Use ample washer fluid when washingthe windshield. The windshield should bethoroughly wet when the wipers are inoperation.
•Avoid using the washers if the fluid reser-voir is frozen or empty to help avoid dam-age to the pump.
When the washing system is used, the length oftime that the windshield washers operatedepends on the ambient temperature. In coldweather, the amount of washer fluid used willalso be increased automatically to help improvecleaning.

Heated washer nozzles *
The washer nozzles are heated automatically incold weather to help prevent the washer fluidfrom freezing.

High-pressure headlight washing *
High-pressure headlight washing consumes alarge quantity of washer fluid. To save fluid, theheadlights are washed once for every five timesthe windshield is washed.

Reduced washing
When approx. 1 US quart (1 liter) of washer fluidremains in the reservoir, the headlights will nolonger be washed to conserve fluid.
A text message and the symbol will be dis-played in the instrument panel to remind thedriver to fill the washer fluid reservoir.
Related information
•Refilling the windshield washer fluid reservoir(p. 547)
•Using the windshield wipers (p. 161)
•Tailgate window wiper and washer (p. 164)

INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.166
Adjusting the steering wheel
The steering wheel can be adjusted to variouspositions.
Adjusting the steering wheel
Lever for releasing/locking the steeringwheel
Possible positions
The steering wheel's height and reach can beadjusted. To do so:
1.Push the lever down to release the steeringwheel.
2. Adjust the steering wheel to a suitable posi-tion.
3. Pull back the lever to lock the steering wheelin place. If the lever is difficult to pull intoplace, press the steering wheel lightly at thesame time as you pull the lever.

WARNING
Never adjust the steering wheel while driving.
If the vehicle is equipped with the optionalspeed-dependent power steering, the level ofsteering force can be adjusted. The force level isadjusted according to the vehicle's speed.

Related information
•Steering wheel (p. 164)
•Adjustable steering force (p. 262)
Seats
The vehicle is equipped with 7 seats. The frontseats can be adjusted electronically* or man-ually. The second and third row seats areadjusted primarily manually.
The adjustment settings for the power frontseats*, door mirrors and the head-up display canbe stored in memory buttons.
Using the multi-function control*, comfort in thefront seats can be further enhance by e.g., adjust-ing the lumbar support or extending the length ofthe front seat cushion.
The rear seats can be folded down and theirhead restraints can be adjusted. The second rowseats can be moved forward/rearward and theirbackrest tilt can also be changed.

Related information
•Adjusting power front seats* (p. 168)
•Adjusting function settings in the multifunc-tional front seats* (p. 171)
•Manually operated front seats (p. 167)
•Using the power seat memory function*(p. 169)
•Folding the second row backrests (p. 178)
•Getting into and out of the third row of seats(p. 179)

||
INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.170
2.Press and release the M button. The indica-tor light in the button will illuminate.
3.Press button 1, 2 or 3 within 3 seconds tostore the current position of the seat/mirrors/head-up display in the selected but-ton.
> When the position has been stored in theselected button, an audible signal willsound and the indicator light in the M but-ton will go out.
If none of the buttons (1, 2 or 3) are pressedwithin 3 seconds, the indicator light in the M but-ton will go out and the position will not be stored.
The seat/mirrors/head-up display must bemoved before new settings can be stored.

Using a stored position
A stored position can be used when one of thefront doors is opened or closed:

Front door open
–Press one of the bottons (1–3) briefly. Theseat, door mirrors and head-up display willmove to the positions stored in that button.

Front door closed
–Press and hold one of the buttons (1–3) untilthe seat, door mirrors and head-up displayhave moved to the positions stored in thatbutton.
The seat, door mirrors and head-up display willstop automatically if the button is released beforethe they have reached the stored positions.
WARNING
•Because the driver's seat can be adjustedwith the ignition off, children should neverbe left unattended in the vehicle.
•Movement of the seat can be STOPPEDat any time by pressing any button on thepower seat control panel.
•Do not adjust the seat while driving. Theseat should be adjusted so that the brakepedal can be depressed fully. In addition,position the seat as far rearward as com-fort and control allow.
•The seat rails on the floor must not beobstructed in any way when the seat is inmotion.

Related information
•Adjusting power front seats* (p. 168)
•Power front seats* (p. 168)
Multifunctional front seats*
In addition to the adjustment settings offered bythe power seat controls, the multifunction controlprovides additional possibilities for convenienceand comfort.
Multifunction control on the side of the seat
The multifunction control can be used to adjustlumbar support*, the backrest's side bolsters*, thelength of the seat cushion and the massagefunction*. The adjustment settings made with thecontrol are shown in the center display* and cer-tain settings can be made directly from the cen-ter display.

Center display
The adjustment settings for the driver and pas-senger seats made using the multifunction con-trol are shown in the center display. If only oneseat is adjusted, the settings are shown in the

STARTING AND DRIVING
}}
389
Towing eyelet
When used, the towing eyelet should always besecurely attached in the openings on the rightside of the front and rear bumpers. There arecovers over these attachment points.

Using the towing eyelet
Take out the towing eyelet, which is storedunder the floor in the cargo compartment.
Remove the cover by pressing the mark witha finger and folding out the opposite side/corner with a coin, small screwdriver, etc.
>The cover turns along its center line andthen be removed.
3. Screw the towing eyelet into place, first byhand and then using the tire iron, etc. until ithas been screwed in as far as possible.
After use, the eyelet should be removed andreturned to its storage location.
Reinsert the cover into the bumper.

Related information
•Towing recommendations (p. 389)
Towing recommendations
Always check with state and local authoritiesbefore attempting to tow another vehiclebecause this type of towing is subject to regula-tions regarding maximum towing speed, lengthand type of towing device, lighting, etc.
Towing your vehicle behind another
vehicle
The XC90 T8 Twin Engine Plug-in Hybrid maynot be towed behind another vehicle. Doing sowould damage the electric motor and the three-way catalytic converter. If the vehicle cannot bedriven and must be moved, it must be lifted ontoa flat-bed tow truck.
If the XC90 T8 Twin Engine Plug-in Hybrid is totow (pull) another vehicle, select the AWD drivemode. This helps charge the hybrid battery andimproves the vehicle's road holding characteris-tics.

MAINTENANCE AND SERVICING
545
With the wipers in the service position, foldout the wiper arm from the windshield. Pressthe button on the wiper blade attachmentand pull the wiper blade straight out, parallelwith the wiper arm.
Slide in the new wiper blade until it clicksinto place.
Check that the blade is securely in place.
4.Press the wipers back against the wind-shield.
The windshield wiper blades are different lengths

NOTE
The windshield wiper blades are differentlengths. The blade on the driver

SPECIFICATIONS
}}
* Option/accessory, for more information, see Introduction.561
Dimensions
The following table lists your vehicle's mostimportant dimensions.
DimensionIn.
(mm)
AGround clearance(curb weight + 2
people)A
8.9 (227)
BWheelbase117.5 (2984)
CLength194.9 (4950)
DimensionIn.
(mm)
DLoad length, floor,
seatback downB80.3 (2040)
49.6 (1260)C
ELoad length, floor21.8 (554)
30.0/35.4
(761/898)D
FHeight69.9 (1776)
DimensionIn.
(mm)
GLoad height32.1 (816)
HTrack, front (modelswithout pneumaticsuspension)
65.9 (1673)E
65.6 (1665)F
Track, front (modelswith pneumaticsuspension)
66.0 (1676)E
65.7 (1668)F