engine oil YAMAHA BANSHEE 350 2005 Owners Manual

YAMAHA BANSHEE 350 2005 Owners Manual BANSHEE 350 2005 YAMAHA YAMAHA https://www.carmanualsonline.info/img/51/49372/w960_49372-0.png YAMAHA BANSHEE 350 2005 Owners Manual

Page 14 of 402

YAMAHA BANSHEE 350 2005  Owners Manual LOCATION OF THE WARNING AND
SPECIFICATION LABELS .......................1-1
SAFETY INFORMATION .........................2-1
DESCRIPTION AND MACHINE
IDENTIFICATION.....................................3

Page 15 of 402

YAMAHA BANSHEE 350 2005  Owners Manual Fittings and fasteners .........................5-21
Lights ..................................................5-23
Switches .............................................5-23
Tires ....................

Page 112 of 402

YAMAHA BANSHEE 350 2005  Owners Manual 5-15
EBU00132
Engine mixing oil
If Yamalube “R” oil is not available, select an oil
from the following list.
cC
Never mix two types of oil in the same batch.
Always use the same type of oil to ens

Page 264 of 402

YAMAHA BANSHEE 350 2005  Owners Manual 8-17
EBU10981
Transmission oil
Transmission oil measurement
1. Place the ATV on a level surface.
2. Warm up the engine for several minutes,
and then stop it.
3. Remove the oil filler cap and wipe off

Page 266 of 402

YAMAHA BANSHEE 350 2005  Owners Manual 8-19
Transmission oil replacement
1. Place the ATV on a level surface.
2. Warm up the engine for several minutes
and then stop it.
3. Place a container under the engine to col-
lect the used oil.
4. R

Page 268 of 402

YAMAHA BANSHEE 350 2005  Owners Manual 8-21
cC
8In order to prevent clutch slippage (since
the engine oil also lubricates the clutch),
do not mix any chemical additives. Do not
use oils with a diesel specification of “CD”
or oils of a

Page 270 of 402

YAMAHA BANSHEE 350 2005  Owners Manual q
w
1. Maximum level mark
2. Minimum level mark
1. Repère maximum
2. Repère minimum
1. Marca de máximo
2. Marca de mínimo
8-23
7. Start the engine and warm up for a few
minutes. While warming up,

Page 344 of 402

YAMAHA BANSHEE 350 2005  Owners Manual 8-97
3. Thoroughly lubricate the drive chain with a
special O-ring chain lubricant.
cC
Do not use engine oil or any other lubricants
for the drive chain, as they may contain sub-
stances that could da

Page 346 of 402

YAMAHA BANSHEE 350 2005  Owners Manual 8-99
EBU00570
Cable inspection and lubrication
w
Inspect cables frequently and replace if dam-
aged. Corrosion can result when the outer
covering of control cables becomes dam-
aged. Cables can also b

Page 378 of 402

YAMAHA BANSHEE 350 2005  Owners Manual 9-7
EBU00529
B. STORAGE
Long term storage (60 days or more) of your
machine will require some preventive proce-
dures to guard against deterioration. After thor-
oughly cleaning the machine, prepare f
Page:   1-10 11-20 next >