flat tire YAMAHA BANSHEE 350 2008 Owners Manual
[x] Cancel search | Manufacturer: YAMAHA, Model Year: 2008, Model line: BANSHEE 350, Model: YAMAHA BANSHEE 350 2008Pages: 140, PDF Size: 4.45 MB
Page 44 of 140
5-6
1
2
3
45
6
7
8
9
10
11
Higher pressures and fast inflation may
cause a tire to burst. Inflate the tires very
slowly and carefully.
EBU19820
Measuring the tire pressure
Use the low-pressure tire gauge.
NOTE:
The low-pressure tire gauge is included as stan-
dard equipment. Make two measurements of the
tire pressure and use the second reading. Dust or
dirt in the gauge could cause the first reading to be
incorrect.Set the tire pressure when the tires are cold. Set
the tire pressures to the following specifications:
EBU19830
Tire wear limit
Replace the tire when the tire groove decreases to
3 mm (0.12 in).
1. Low-pressure tire gauge
1
Recommended pressure:
Front
30 kPa (4.4 psi) (0.30 kgf/cm
2
)
Rear
30 kPa (4.4 psi) (0.30 kgf/cm
2
)
Minimum:
Front
27 kPa (3.9 psi) (0.27 kgf/cm
2
)
Rear
27 kPa (3.9 psi) (0.27 kgf/cm
2
)
Maximum:
Front
33 kPa (4.8 psi) (0.33 kgf/cm
2
)
Rear
33 kPa (4.8 psi) (0.33 kgf/cm
2
)